Used Pusher for sale (391)

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out Lhoded Ih Hqjpfx Ab Uon 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right / left with NC axis high / low programmatically, thus dimension input by folding / light measure possible, Dimension: LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg (technical data according to manufacturer - without guarantee!)

Condition: used, Year of construction: 2005, Weight: 1.240 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Main motor power [kW]: 6.0 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 - Options: Automatic pusher system - Year: 2005 - Documentation available: No - Serial number: 535 - Voltage [V]: 400 - Power [kW]: 6.0 - Transport weight [kg]: 1240kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ledpsw Db Evefx Ab Uehn Glenn Smeets

Condition: used, Year of construction: 2006, SHREDDER TYRANNOSAURUS 9904 IN IN GOOD CONDITION FOR SALE. THE BIGGEST SINGLE-SHAFT-WASTE-SHREDDER OF THE WORLD. WEIGHT APPROX. 70 TONS. Technical Data: REXROTH-hydraulics power pack: 525 kW two hydraulic motors are installed at both ends of the rotor Rotor Diameter 1 000 mm Rotor Length 3 200 mm Rotor Knives 139 pieces, turnable fur multiple use Counter nnife cassettes 4 pieces, working separately Counter knives 24 pieces, turnable fur multiple use Screen 4 segments, opening separately when foreign pieces coming in the machine Hydraulic pusher Ljdpfx Aboxfrraj Uehn Dimensions of the machine: - Length 6 550 mm - Width 6 800 mm - Height 3 610 mm Total weight approx. 70 tons This advertisement is showing photos of the machine as it is and example picture for illustration purpose. The machine is dismantled on stock. More information could be send on request.

Condition: good (used), mileage: 176,778 km, power: 250 kW (339.91 HP), first registration: 03/2015, color: white, axle configuration: 6x2, tire size: 315/80R22,5, wheelbase: 4,300 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, traction control, = Additional options and accessories = - Second diesel tank - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Fixed fifth wheel - Short cab - PTO (power take-off) - Pump - Central lubrication = Notes = Number of axles: 3, Configuration: 6x2, Kerb weight: 16,085 kg, Gross weight: 28,500 kg, Second diesel tank, Fifth wheel: Fixed, Number of diff locks: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Rear-view camera, Lighting type: Halogen lamp, Climate control, Flashing lights, Engine power: 250 kW (335 HP), Fuel: Natural gas, Euro standard: 6, Transmission type: Opti-cruise, Gearbox type: Scania, Gears: 12, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, Body build year: 2015, System type: Pusher 4000 OB, Pump, Seating configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual = Further information = Driveline Fuel type: Natural gas Transmission Gearbox: SCA, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tyre tread left: 3 mm; Tyre tread right: 5 mm Axle 2: Twin tyres; Tyre tread left inside: 9 mm; Tyre tread left outside: 5 mm; Tyre tread right inside: 5 mm; Tyre tread right outside: 5 mm Axle 3: Lift axle; Steered; Tyre tread left: 5 mm; Tyre tread right: 4 mm Dimensions Dimensions (L x W x H): 1,040 x 255 x 366 cm Weights Unladen weight: 16,085 kg Payload: 12,415 kg Gross vehicle weight (GVW): 28,500 kg Functional Pump: Yes Maintenance APK (vehicle inspection): valid until 04.2026 Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification Registration number: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simply! • Large, quickly changing inventory • Recognizable quality • Competitive pricing • Reliable business practices Lsdpfx Abexfqxxs Ujhn • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • Assured 'recognizable quality' • And more.... Visit our website for special offers and our complete stock. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, power: 375 kW (509.86 HP), gearing type: mechanical, fuel type: diesel, first registration: 04/2015, color: white, overall weight: 27,000 kg, mileage: 697,127 km, empty load weight: 11,840 kg, maximum load weight: 15,160 kg, axle configuration: 6x2, suspension: steel-air, loading space volume: 23 m³, loading space length: 5,600 mm, loading space width: 2,430 mm, loading space height: 1,800 mm, number of seats: 2, driver cabin: sleeper cab, brakes: retarder, emission class: euro6, Equipment: ABS, air conditioning, cabin, central locking, cruise control, fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * Kempf aluminum grain tipper * 24 m³ loading volume * Roller tarpaulin * Access and platform * Grain pusher * Loading and swing flaps * Body dimensions: L=5,600 x W=2,430 x H=1,800 mm * Voith retarder * Air conditioning * Ecodirna stationary air conditioning system * Cruise control * Trailer coupling * Towing capacity: 27,000 kg * L-cab with 2 berths * Auxiliary heating * ABS (anti-lock braking system) * Traction control system (ASR) * Hill start assist * Electric windows * Heated electric mirrors * Multifunction steering wheel * 25 liter refrigerator * Sunblind, driver's door side window * CD radio * Comfort driver's seat, air suspension * Seat heating * Suspension: leaf/air with lifting and lowering * Alcoa aluminum rims * Roof lamp bracket * Sun visor * Tinted windows * Air horn * Differential lock * Air intake raised * Folding underride guard * Storage box * Wheelbase: 4,800 mm * GVW: 27,000 kg * Payload: 15,160 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - . Lhodpfxovhpuzs Ab Usn

Condition: excellent (used), Year of construction: 2016, 1 Up-stroke angle cross- cutting saw model UKA 600 with pneumatic stroke and clamping device Saw unit mounted on rotating table of diameter : 980 mm Saw blade diameter : 600 mm Cutting capacity : 165 x 240 mm 90 degrees Maximum cutting height : 165 mm at the Fence and 175 mm Diameter (at 90 degrees) for round material Cutting angles : 30 – 90 – 30 degrees Lodpoxivhasfx Ab Ushn 45 – 90 – 45 degrees with automatic function Motor power : 5.5 Kw Voltage : 400 Volt 50 Hz Working height : 920 mm 1 Tiger Stop 7.5 Automatic Stop and pusher Total length : 7.95 meter Working length : 7.35 meter Net working length (automatic saw) : 6 meter Voltage : 220 Volt 50 Hz Motor power : 0,45 Kw Feed speed : maximum 40 m/min (Depends on load) Précision : +/- 0,4 mm as pusher. Infeed-table for TigerStop 6.8 Total length : 7.4 meters Table width : 325 mm 1 Outfeed / infeed table with side fence Length : 3.7 meter Width : 325 mm Right side pusher version (video for explanation purposes only) The machine is operated by push button for semi-automatic use or fully automatic for 90 degree angles controlled by the TigerStop. The rotation table is controlled by a Tigerstop Servo drive TigerDrive

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Lhedsd Ih Hyspfx Ab Ujn Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)

Condition: used, Empty weight: 200 kg Lhodpexh E Nqofx Ab Usn Occ sneeuwschop 325 cm Article nr.: W351999006-veiling Used snow shovel 325 cm

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm Lodjxhg Ibspfx Ab Ujhn - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: used, mileage: 445,996 km, power: 294 kW (399.73 HP), first registration: 02/2012, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 3 axles, next inspection (TÜV): 10/2024, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR (traction control) * Radio * Cruise control Lhjdpfx Aow Sbqgjb Uon * Electric windows * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Air-suspended driver's seat * Rear axle differential lock * Lifting/steering axle * Top air intake * Air dryer * Trailer coupling * 2-line air connection * HydroDrive front axle drive * 16-speed * Suspension: leaf/air * Payload: 11,550 kg * Constant brake: retarder ----Special bodywork: Crane: Hiab Jonsered 1420, raised seat with seat heating, pilot control, fully hydraulic outriggers, 6th + 7th control circuit for rotary servo and grab operation. Read load chart: Lifts at 3m-4.25t, 4m-3.24t, 5m-2.68t, 6m-2.28t, 7m-1.95t, 7.9m-1.65t.----Body: Meiller hooklift RK 20.70 for 5.5-7.4 m container/total container length, 20,000 kg lifting capacity, pusher arm, extendable rear underrun protection, internal controls. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see legal notice) form the basis for all contracts of sale, invoices, pro forma invoices, orders, and sales discussions.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Lhsdpfx Ajtk It Sjb Uon Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is Ljdpfx Abofg E Hne Uohn separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Chip size (10 - 60 mm) Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns Lodovrk A Uspfx Ab Uehn concave/ 30 x 30 mm, broaching knives Screen perforation: 15/20 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: used, Empty weight: 1.000 kg Article nr.: W351999002-veiling Ljdpfx Asxh Du Sob Ujhn Used Snow plug 3m

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. Lhjdpfxoixz A Ej Ab Usn With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Condition: used, mileage: 445,996 km, power: 294 kW (399.73 HP), first registration: 02/2012, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 3 axles, next inspection (TÜV): 10/2024, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, crane, * Sun visor * ABS * ASR (anti-slip regulation) * Radio * Cruise control * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Roof hatch * Rear window * Air-suspended driver's seat * Rear axle differential lock * Lift/steering axle Lhjdpfxjw Sbqae Ab Uon * Top-mounted air intake * Air dryer * Trailer coupling * 2-line air connection * HydroDrive front axle drive * 16-speed gearbox * Suspension: leaf/air * Payload: 11,550 kg * Retarder brake: Intarder ----Special body: Crane: Hiab Jonsered 1420, elevated seat with seat heating, pilot control, fully hydraulic outriggers, 6th and 7th control circuits for slewing and grab operation. Read load chart: lifts 4.25 t at 3 m, 3.24 t at 4 m, 2.68 t at 5 m, 2.28 t at 6 m, 1.95 t at 7 m, 1.65 t at 7.9 m.----Body: Meiller roll-off tipper RK 20.70 for 5.5-7.4 m container/total container length, 20,000 kg lifting capacity, pusher arm, extendable underride guard at rear, interior controls. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT WARRANTY, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, pro forma invoices, orders, and sales discussions are our Terms and Conditions (see Legal Notice/Imprint).

Condition: good (used), Busch B+P Ram punch, label die cutter A professional machine made in Germany. Very good condition. The Bush company is a leader in the production of pallet turners and pushers. 100% efficient, ready for production. This is the currently produced model. Technical data: Max. format 230 x 230 mm Number of cycles 13/min Max. input 170mm Efficiency 780,000 sheets/h Weight 860kg The machine has a hydraulic quick-acting unit. Clamps for mounting dies, axial adjustment of dies. Feed table adjustable in every plane. Lhedpfx Aexddh Rsb Uen Two operating modes: semi-automatic, manual. Tail on the delivery.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H Lhodefgyigepfx Ab Uen with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, Year of construction: 2025, · Precise conveyor system for sheet transfer, continuously adjustable · Bands individually tensioned for exact straight running. · Sheet guide elements on the conveyor system, vacuum equipment Automatic Sheet positioning on the stack by side Straight pusher, activated by photo cell via inlet. . Central format adjustment. · Compressed air nozzles to support the sheet transition, clocked. Automatic Stack height sensing. Lsdpfx Aefpa A Esb Uehn · Control elements and resettable sheet counter on B side. Automatic Sheet jam control with connection to machine Stop impulse. · Stepless format setting with clamps Sheet formats max. 750mm X 1050mm

Condition: used, Empty weight: 500 kg Occ sneeuwschop breedte : 3000 mm hoogte : 850 mm Article nr.: W351999008-veiling Used snow shovel Lhjdpfx Ajxh Dkyeb Uon

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t Ljdpfjfg E Hmex Ab Ushn dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, Empty weight: 200 kg Occ sneeuwschop 325 cm Article nr.: W351999007-veiling Lsdpfjxhzk Dsx Ab Ushn Used snow shovel 325 cm

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. Lhjdpefgyifofx Ab Uon The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: used, Empty weight: 200 kg Lhodpfsxhzkdsx Ab Ujn Occ sneeuwschop 335cm Article nr.: W351999004-veiling Used snow shovel 335cm

Condition: used, Empty weight: 200 kg Occ sneeuwschop 325 cm Lhjdpfx Aoxhy Afjb Uon Article nr.: W351999005-veiling Used snow shovel 325 cm