Used Pusher for sale (400)

Condition: ready for operation (used), Technical characteristics Description : SELCO panel saw TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table Principal technical characteristics Max cutting length : 5600 mm Max auxiliar pusher course : 4300 mm Max blade height from table level : 122 mm Max clamps opening : 110 mm Lifting table with direct loading : 5600 x 2200 mm Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm Main blade motor 18,5 kW / 50Hz (25 Hp) Incisor blade motor 2,2 kW / 50 Hz (3 Hp) Brushless motor for blade chariot - Speed 1 -150 m/min Brushless motor for main pusher – Max speed 100 m/min 2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm) Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER Main blade Ø 430 mm Incisor blade Ø 200 mm 4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line) 4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line) 4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line) Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands 4 air cushion tables 4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation Lifting loading table Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option). Pedpsucitnjfx Ahvegi Automatic cut panels evacuation Heavy single structure, Industrial chassis, strong stability Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés Pressor group Lateral alignment group with 2 independent rollers The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation PC Windows XP, 17" screen With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings Software and applicancies: "OPTIPLANNING" Pro Version software : Great number of cutting lists (including different types of material) allowing “all at once” optimization "IMPORT FILE" function Editing on external device and import files on machine PC. Automatic management of panel piles and waste material Panel stock and

Condition: excellent (used), Year of construction: 2008, Features: * Diverter of the manufacturer KNAPP * Drive: Pneumatic * Condition: fully functional with traces of use * Colour: grey * Material: Steel * Professionally dismantled and packed * Price per piece Pgjdpfx Aod Icv Tjhvsi * Total quantity in stock: 20 pcs. * Condition: very good Technical data: Total width: 530 mm height: 530 mm Length of the boom: 630 mm Length of mounting crossbeam: 430 mm Lifting depth: 400 mm Width of pusher: 400 mm Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, pushers or telescopes for loading and unloading your goods, we are your competent partner! We would be pleased to make you an individual offer or advise you on the conception or assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For enterprises of the most different industries, as for example: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will work out ways to optimize your process and material flow in a cost effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: new, Year of construction: 2025, Angled Cutting for Single Boards and Packs of Boards: Efficiency and Precision Without Compromise The TRGSI, just like the TRSI, is a monoblock system designed to ensure outstanding installation speed and effective vibration reduction. A true innovation powerhouse for achieving flawless results in record time! Programmed Cutting for Single Boards and Packs Fixed Measurements and Customized Sequences: Thanks to the ability to manage various cutting schemes, it’s easy to set up fixed or sequential cuts, optimizing every operation. Podov Iqd Rspfx Ahvogi Industrial CNC Technology: An advanced system that allows for the quick storage of different cutting plans. Up to 25 different measurements can be managed simultaneously, with angled heads and independent options for every specific need. Customizable Cutting Programs: Work parameters (such as quantity and waste) are easy to set and can be customized according to individual preferences. Each cutting plan can be saved for quick access. Easy Program Loading: Cutting programs can be uploaded via USB in just a few steps, with files in .txt format for practical and fast management. Advanced Optimization: Two cutting versions to maximize efficiency: OL Version optimizes length, while the E Version offers total optimization, minimizing waste. Operating Dynamics Fast and Precise Movement: The steel guide with ball recirculation and dual sliding carriage, powered by brushless motors, ensures unmatched speed and accuracy. Durability and Perfect Sliding: The reinforced structure ensures optimal sliding, increasing the system's durability and reliability. Pneumatic Pusher: Equipped with fully protected and highly visible stroke, the pneumatic pusher system ensures maximum control and precision. Perfect Angling and Precision: The synchronization between the lateral arm before the blade and the pneumatic presses guarantees a perfect cut, both in quality and angle. Advanced Accessories for Loading and Unloading With dedicated accessories, the system can be configured for manual or fully automatic loading and unloading operations, ensuring an uninterrupted workflow.

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Additional key for office programming software Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 90 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 11 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher carriage with 9 clamps Blade carriage speed 120 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Pgedpfjvtbzkex Ahvji

Condition: good (used), Features: * Diverter of the manufacturer KNAPP * Drive: Pneumatic * Condition: fully functional with traces of use * Color: black Pedpfx Asdh Ur Sohvsgi * Material: Steel * Professionally dismantled and packed * Price per piece * Total quantity in stock: 6 pcs. Technical data: Total width: 530 mm height: 580 mm Length of the boom: 590 mm Length of mounting crossbeam: 430 mm Stroke depth: 400 mm Width of pusher: 400 mm Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to provide you with an individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For enterprises of the most different industries, as for example: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will work out ways to optimize your process and material flow in a cost effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 600 mm, working height: 900 mm, saw drive: 7,500 W, Mitre saw adjustable to 45° equipped with 6-meter pusher discharge deck with 6-strand loading chains for faster loading Podswzg E Njpfx Ahvjgi machine overhauled and fitted with a new digital touchscreen

Condition: new, Year of construction: 2024, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. Pgodpfxegwt S Ee Ahvei It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling Pgjdpfx Ahogwt S Tsvsi • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 75 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 7.5 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher wagon with 10 clamps Blade carriage speed 1-120 m/min Pusher speed 60 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Pgodpfx Ajv Amx Tjhvji

Condition: used, mileage: 328,000 km, power: 368 kW (500.34 HP), first registration: 02/2017, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 6,000 mm, loading space width: 2,437 mm, loading space height: 1,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, parking heater, Manufacturer Volvo Pgsdpjwuigisfx Ahvsi Model FM500 8x4 Pushertridem 3 Way Tipper / Kipper Year 2017 Condition Good Serial Number YV2XT40G0HA798845 Ref. nr. 1447896 Reg. date: 10-02-2017 Engine: 13 liters, 500 hp/375 kW, 2500 Nm Hk: 500 Km: 328000 Gearbox: I-shift Eurotype: 6 Diesel tank: 1 Tank liter: 285 Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: Globetrotter Coffee machine: ? Equipment package: Comfort+ cab package Radio: ? Disc brake: ? ABS: ? Engine brake: VEB + Tire Size: 385/65R22.5 - 385/55R22.5 - 315/80R22.5 - 315/80R22.5 Cover% left 40% - 40% - 80% - 80% Front suspension: Parable Suspension rear: Air Wheelbase: 4600 mm Toolbox: ? Hydraulic system: ? Total weight: 32000 Kg Net weight: 14900 Kg Load capacity 17100 Kg Inside length: 6000 mm Internal width: 2437 mm Interior height: 1000 mm 3 way: ?

Condition: new, Year of construction: 2025, IMPORTANT: MACHINE WILL BE BRAND NEW * The cutting guillotine is made of cast steel and is more resistant to fracture, buckling, and abrasion. * Cast steel cutting ram is subjected to a stress-relieving process. * The bolts of the blades on the cutting ram are monitored by the automation system and they are constantly kept tight by the hydraulic tightening system. Fracture and wear of the blades are minimized with this system, and 5 tons of force is applied to each bolt of the blades. * A hydraulic clamping system is used on both the moving and fixed parts of the blades. * Friction surfaces are coated with HARDOX 450 & 500 to prevent wear. * The machine has a fully automatic PLC control and a professional remote controller. * All electric-electronic components used are Schneider and Siemens Brands. * Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for one (1) year or two thousand five hundred (2.500) operation hours, whichever comes first. SEE THE TECHNICAL DESCRIPTION BELOW: Cutting Force: 700 Tons Side Compression Force: 2x120=240 Tons (each wing) Clamp Compression Force: 120 Tons Pusher Ram Force: 120 Tons Electric Motor: 180 kW Machine Weight: 70.000 kg Cutting Width: 800 mm Podpfx Asdd Tp Rehvjgi Box & Bale Size: 800 mm x 600 mm Box Length: 6.000 mm Box Width Opening: 350 mm Capacity: < 10 - 15 ton/h (Cutting Capacity), 15 - 20 ton/h (Baling Capacity)

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Pgsdpfsvvkqgex Ahvji

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Pjdpfxsvvi Tye Ahvsgi Storage location: Customer

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Pgjdpfx Asvvi Anshvei Storage location: Supplier

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Automatic tipping lowering Lifting and lowering device Pgsdpfx Aheyxb E Esvei Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Pgodoyw Ivhepfx Ahvei Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Year of construction: 1979, condition: used, machine/vehicle number: 3534, Pressing force: 630 kN Return force: 100 kN max. ram stroke: 200 mm Installation height: 400 mm Podpfx Ahjb Hk Dzjvjgi Projection approx.: 350 mm table size: 610 x 800 mm drop-through hole in the table: 100 mm Drill hole for stool: 40 mm speed of the pusher: 350 mm/s Pressing speed: 18 mm/s Boiler speed return: 380 mm/s Hydraulic drive: 380 V, 15 kW space requirement: 1800 x 920 x 2440 mm Weight: 3,94 t

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Pgsdpfeyxwyrox Ahvei Technical specifications: Maximum infeed length : 6300 mm ( Pusher ) Minimum cutting length : 50 mm Maximum cutting width : 360 x 30 mm / 240 x 160 mm Maximum feed speed : 60 mtr/min Main engine( Saw) : 7,5 Kw Year of construction: 2001 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Can be examined in working condition Request WHATSAPP video

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm Podpfxju Rv Uqo Ahvjgi No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Psdpeiwbfuefx Ahvegi Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: good (used), Year of construction: 1991, Shredder Weima WL6, Podpfx Asyv R Svjhvjgi Motor 18.5 kW, Rotor length 800 mm, 21 knives on the rotor, Screen Hydraulic pusher floor Control cabinet Location: in stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2012, functionality: fully functional, Manufacturer: HOLZMA Model: OPT HPL 350/38/22/NEW Year of manufacture: 2012 Cutting width: 3800mm Loading elevator Yes Saw projection 80mm Main motor power 13.5kW Backsaw motor power 2.2kW Saw carriage speed 1-150m/min. Pusher speed 1-90m/min* Number of work tables 3pcs Additional cutting start bar Yes Pgedpfx Aheyxk Dkevoi Label generation software Yes Label printer Yes Cutting card creation software Yes

Condition: ready for operation (used), Year of construction: 2013, CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details. • Condition: Excellent – fully functional, very well maintained, low usage, ready for immediate operationTechnical specifications • Max cutting length: approx. 4,200 mm (depending on configuration) • Max cutting width: approx. 3,200 mm • Saw blade tilting range: 0° to approx. 45° • Max cutting height at 0°: approx. 72 mm Pgodpfx Aheyvqz Djvsi • Main saw motor power: approx. 14 kW • Scoring blade diameter: approx. 180 mm • Saw carriage feed speed: up to 100 m/min (forward/backward, Speed version) • Control system: CNC/PC controlEquipment and features • Automatic tilting saw blade for angular cuts • Optimized cutting cycles (single, multiple, batch) • Program-controlled pusher for accurate positioning • Integrated scoring unit for clean cuts • Air tables (3x) for easy handling of large panels • Format and angular cutting system Additional equipment • Saw blades • Scoring blades • Optional optimization software

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen Podjdify Ijpfx Ahvsgi chalk line cutting working according to program 1 pcs pusher for cut off pieces hydraulic saw blade movement machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm work piece feeder system with toothed belt feed speed 120 m/ min cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm Pjdpfohvan Isx Ahvogi cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)