Used Scharmann for sale (38)

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Ncjdpfxoh Hfrns Alneu Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: ready for operation (used), Available immediately, ex works: Scharmann boring table Year of manufacture approx. 1985 Table size 1800 x 1600 mm Nedpezg Tk Hofx Alnjcu Table load capacity 20 tons Travel distance (X-axis) 1250 mm Electric drive 4 kW Weight 9 tons Price: EUR 8,500.00 plus VAT, ex works.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 123426, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik System 800 - 840C, workpiece weight (max.): 2,000 kg, table width: 630 mm, table length: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 2,300 rpm, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 161, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Dörries Scharmann Solon 2 DBF horizontal machining center, year of manufacture 1996. Ncsdpfeyu Srtsx Alnju Manufacturer: Dörries Scharmann Model: Solon 2 DBF Year of manufacture: 1996 Condition: used Category ID: 1289 Type ID: 4161 Machine type: horizontal machining center If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate. Njdjzcm Aiepfx Alnocu

Condition: used, Year of construction: 1973, spindle diameter 140 mm x-travel 2000 mm y-travel 2000 mm z-axis 1500 mm spindle stroke - max. 800 mm spindle taper ISO 50 table surface area 1800 x 1500 mm table load 15000 kg turning speed range 2,3 - 810 U/min total power requirement ca. 30 kW weight of the machine ca. 31000 kg dimensions of the machine ca. 7300 x 5600 x 4000 mm Equipment: - Faceplate with NC facing slide and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices Nsdsy Umc Ujpfx Alnecu

Condition: used, Type: FB50 OPTICUT Njdpfxj Dv N De Alnjcu Technical characteristics: DIGITAL BORING

Condition: used, Year of construction: 2009, swing diameter 1400 mm faceplate diameter 1250 mm Control SIEMENS work height max. 1100 mm table load 6 t total power requirement 80 kW Crossbeam travel: 700mm Ncedpey S D Tfjfx Alnsu Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN The machine enables additional drilling and milling via an integrated milling unit in the tool change system.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES The machine specification will be finalized by the purchaser and VTT-WB New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price £525,000 B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Ncjdpfx Ajy Uw Emolneu £540,000 C – machine to original specification including full pallet system and full tool change system New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Ncsdpfx Aemb Urdjlnou Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, CNC Vertical lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Make: DS Dorries Scharmann Type: VCE 2000 FMC Control: SIEMENS 840C Ncodpswb Ayiofx Alnsu Year: 1998

Condition: used, Year of construction: 2001, Technical details: x-travel: 2000 mm y-travel: 1600 mm z-travel: 1140 mm b-axis: 0.0001° x 360° ° number of pallets: 4 table surface area: 1000 x 1450 mm max. table load: 6.000 kg turning speed range: 4 - 10000 U/min power capacity at 100 % load: 40 kW kW tool taper: HSK100 DIN69893A machine weight ab.: 63.000 kg Ncedpfx Aoxc E H Eelnsu space required L x W X H: 12320 x 11000 x 4700 mm incl. 50 x HSK100 tool tapers *

Condition: used, spindle diameter 125 mm x-travel 8000 mm y-travel 3000 mm spindle bore 240 mm w-axis 1650 mm Nsdpeyuqkusfx Alnjcu total power requirement . kW

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland Ncodpfx Ajy Ed Ehjlnou X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: good (used), Year of construction: 1994, Travelling path X: 7,300 mm Clear width between columns: 3,100 mm Ncodjy Ny Dhopfx Alneu Distance spindle nose to clamping plate: 1,500 mm Table size: 2,500 x 7,000 mm Control: Heidenhain TNC 415 Automatic tool changer Support SR 40, 40 kW, ISO50, 4,000 rpm Angular milling head WFKU, 30 kW, 4,000 rpm Spindle extension VFL, 30 kW, 4,000 rpm

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Ncodpey Dvlqsfx Alnsu Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: used, Year of construction: 1994, x-travel 1600 Ncedpfsyqvv Ujx Alneu y-travel 1300 mm z-travel 1450 mm Control Siemens 840C Tool changer 100 Pos number of spindle speeds 10-4000U/min tool taper Iso50 A-axis -100°/+10° c-axis 360.000° 0 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter . mm Ncsdpfjyqum Ssx Alnju x-travel . mm y-travel . mm table length 2000 mm table width 2000 mm table load 25 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1965, For technical data, see images. Ncsdoyvtm Nepfx Alnsu

Condition: used, spindle diameter 125 mm x-travel 2000 mm y-travel 1100 mm z-travel SK 50 mm spindle taper Philips 2500 digital readout Pfillips turning speeds 925 U/min spindle stroke 800 mm Table 1000x1400 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Nsdpfxjyt R Ans Alnocu Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1992, faceplate diameter 1250 mm swing diameter 1400 mm turning height 980 mm table load 3 t Control Siemens type Sinumerik 880T x-axis 1000 mm z-axis 1000 mm w-axis 600 mm c-axis 360 ° Tool changer 62 Pos. grinding head horizonzal grinding head vertical power capacity - table 69 kW weight of the machine ca. 26 t dimensions of the machine ca. 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Nodpfxsyt Rzdo Alnscu than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 130 mm x-travel 6000 mm y-travel 1750 mm z-travel 600 mm w-axis 800 mm spindle taper SK 50 control Siemens 8M type 8M mm table surface area 1500x1300 mm Table load . kg turning speeds . U/min spindle motor . kW feed . m/min total power requirement . kW weight of the machine ca. 75 t dimensions of the machine ca. . m Tool magazine: 60 tools The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Ncedpfx Asyq Swnolnsu About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Njdpeygx D Hofx Alnjcu Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: used, Year of construction: 1979, spindle diameter 150 mm x-travel 9500 mm y-travel 2500 mm Control Siemens type 840 C ram: horizontal adjustment 700 mm dimension of the ram 400x400 mm Table load 25000 kg table travel 2500 mm Table area 2000x2500 mm No. 312007 Nedpfx Ajyqv Dlolnscu The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1994, faceplate diameter 1250 mm swing diameter 1400 mm turning height 1500 mm Control Siemens type 880T Table load 6000 kg cross rail - adjustment 700 mm Max ram stroke 1000 mm turning speeds 400 U/min transmission ratio 2 Feed 3-8000 mm/min total power requirement 69 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ncedpfoyqvu Djx Alnsu We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2004, x-travel 3800 mm y-travel 2000 mm z-travel 670 mm Control Siemens type 840 D sl surface area 3000x1800 mm milling spindle 120 KW turning speeds 30.000 U/min tool holder HSK 63 Tool changer 124 Pos Measurement and monitoring systems The machine has always been updated to the latest technology The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Nedpfx Aleyqt Unenocu