Used Profile Rolling Mill for sale (20,552)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, power: 450 kW (611.83 HP), workpiece diameter (max.): 21 mm, total length: 30,000 mm, ROLLING MILL - 2 rolling pass - power 450 KW - raw material: wire road low carbon dimensions from fi 5.00 to fi 21.00 mm - capacity depending on the size of 1200 kg/h - finished products: flat bars from 8x2 to 30x3 mm round bars from fi 5 to fi 16 mm square bars from 5x5 to 14x14 mm triangle bars from 10x10 to 20x20 mm angle bars from 10x10x2 to 20x20x3 mm equal angle bars from 15x10x2 to 20x12x4 mm Codpfex I Nbmsx Ac Nepu If you have additional questions or need more information, feel free to send us a message or call us.

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm speed: approx. 15 m/min working direction: any Cedpsp E Efvsfx Ac Nspu work roll diameter: 80 mm

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any Cpjdpfx Aop E Egljc Nju work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any Cjdsp E Ed Rjpfx Ac Nopu work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: used, Year of construction: 1992, spindle diameter: 50 mm, milling spindle length: 545 mm, Longitudinal profile milling machine with lifting spindle 545mm long, diameter of lifting spindle D=50mm, motor 5.5kW. Glazing bead saw D=180mm, 2,2kW. Feed rate 2-4-6-12m/min Cpodpfxsua Swwe Ac Nsu

Condition: excellent (used), OMEC 750 CE drawer joint milling machine The machine is designed for making connections of drawers, boxes, etc. The operator simultaneously gives two pieces of joined elements, then the machine Automatically mills the entire length Spindle on an eccentric Milling engine power 1.1 kw Spindle speed 18000 RPM Two working speeds 25 and 35 n/-1 Machining parameters: Front face thickness: min/max: 7/60 mm Side wall thickness: min/max: 10/30 mm Keyway height: min/max: 6/18 mm CE certificate Codpfxjtq U Acj Ac Nopu Machine dimensions: 1300x700x1200h mm

Condition: used, Year of construction: 1983, functionality: unexamined, Max. working width: 750 mm Max. working height: 150 mm Spindle diameter: 50 mm Hydraulic motor: 3 kW Codpfx Asv Tnagec Nopu

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg 3 spindles, 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, total working length approx. 3000 mm, Cpodpfxsxrlgwo Ac Nsu extendable workpiece support

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Cpodpfx Aoxbtx Hec Nsu Weight: approx. 200 kg

Condition: used, 3-Roller Ring Bending Machine CONZ Type UM 7-4 Motor no.: 1331455 Year built: ca. 1970 Roll diameter, drive roller: 60 mm Roll diameter, adjustment roller: 68 mm Roll width, drive roller: 145 mm Roll width, adjustment roller: 105 mm Roll speed: 26 rpm Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz - Forward and reverse rotation - Top roller without swing bearing - Parallel adjustment of the lower rollers via threaded spindle Codpfx Acjxbtxye Nspu - Vertical adjustment of the top roller via threaded spindle from below Required space (L x W x H): 950 x 520 x 1200 mm Weight: 200 kg

Condition: new, Year of construction: 2025, Walec mechaniczny W11G 1,2x1530 Napęd mechaniczny, wbudowany w 3 cylindryczne, specjalne opcje do obróbki cienkich blach. Dane techniczne: Cjdpfxofwxune Ac Nepu Model `` W11G 1,2x1530 Marka ACL firmy ANFAN Moc silnika, kw, 1.5 Maksymalna grubość blachy (mm), mm, 1,2 ilość walców, szt,, 3 Długość, mm, 2700 Szerokość, mm, 600 Wysokość, mm, 900 Waga, kg, 500

Year of construction: 1973, condition: ready for operation (used), A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible. Cpodpfx Acsxdc Uie Neu

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover Codpfsh A S Htjx Ac Njpu - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Cpedjuz If Nspfx Ac Nju Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: excellent (used), Year of construction: 2008, 2 x pneumatic clamps 1 x Saw unit ( 4 Kw ) 1 x moulding, spindle, bottum : 545 x 40mm ( 4 Kw ) 1 x Moulding, spindle, bottum : 545 x 40mm ( 2,2 Kw ) 1 x moulding, spindle, top : 545 x 40mm ( 2,2 Kw ) Maximum moulding tool : Ø 350 mm Lot of tools/heads for window production included. Table dimensions : 500 x 1030mm Total Amp : 30 Weight : 1640 Kg Cedjwz Ei Tspfx Ac Nepu Ask for WHATSAPP video presentation ZUANI heads/tools on box included ( 13 Pc. ) + 30 pc. of loose tools/discks, included. Original manual + electric diagram

Year of construction: 1986, condition: good (used), Manufacturer: made in EU Model: Hot Rolling Mill  Year: 1986.  Main Technical Details:  130mm income billet size  Billet length 6-15m 10t o 40 mm bar and sections rolled product Finishing rolling speed for 10mm bar13,5 m/sec Cooling bed length 105mm Electricity consumption : 900-1500 MVA according to production 450.000 ton/year capacity  Components:  reheating furnace  8 horizontal roughing stands ; continuous  7 horizontal plus one vertical stands intermediate train  2 horizontal and 2 vertical stands finishing train  Cut to lengths shear  cooling bed  rolls shop  Cpsdpfxjd Tqwao Ac Nou

Condition: reconditioned (used), Year of construction: 1990, Hot rolling mill for REBARS De-rebars - 8 - 32mm Capacity - 250.000 TPY - STANDS, GEARBOXES, MOTORS, SHEARS, QUENCHING, OIL LUB UNITS, Cpjdpfjvpv Drex Ac Nju - TWIN CHANNEL, APRON, COOLING BED, ROLLER WAYS, FULL ENGINEERING, - WORSKHOP, AIR COMPRESSORS, TESTING LAB, MOBILE CRANE ORIGIN OF GOODS: 100% ITALY / EU Please contact us for more details. Thank you!

Condition: good (used), Year of construction: 2008, functionality: fully functional, filling opening width: 1,400 mm, total width: 4,950 mm, total height: 4,443 mm, total length: 8,093 mm, type of input current: three-phase, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was in reliable operation until the end of June 2024. The machine is in full working order and is ideally suited for immediate re-use or as a solid base for custom modifications. Technical Features & Equipment: Modern belt feed The machine is equipped with a contemporary belt feed system, ensuring efficient and precise material handling. Drive couplings with bell-type sleeves Robust bell-type sleeves in the drive couplings provide reliable power transmission – easy to maintain and built for longevity. Cjdpfx Ajwzkuzsc Nspu Large couplings, final stage version The machine is already fitted with the upgraded large-size couplings according to the latest machinery specification, offering enhanced stability and performance. Standardized compaction units The installed compaction units meet current industry standards, delivering consistent and powerful processing. Kneading rollers – good profile, used condition The kneading rollers are in a used but fully functional condition, with good tread profile remaining. Conveyor belts – used, but in good condition The conveyor belts show typical signs of wear but remain fully functional and well-preserved. Note: The Makrolon viewing windows should be replaced as they display age-related signs of use. The machine is currently dismantled but can be inspected on site. This machine offers an excellent combination of reliability and modern technology, ideal for operations seeking a proven solution with up-to-date equipment features. For further questions or to arrange a viewing appointment, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2001, machine/vehicle number: 081001, WOODWORKING TENONING MACHINE WITH AUTOMATIC FEED, 4 OPERATIONS Brand: VERTONGEN Model: PENTHO C 4 B Serial No.: 081001 Year: 2001 (Photos taken prior to overhaul, functional testing & cleaning) Automatic cycle woodworking tenoner with manual operator group selection and fine adjustment. MACHINING CAPACITIES: - Max. wood section (thickness x width): 135x230 mm - Max. cutting height: 135 mm MACHINE CONFIGURATION: Table: - Cast iron table 400x600 mm, tiltable up to 60°, positioning by clamping - 2 pneumatic hold-down clamps for wood clamping - Extendable metric stop ruler with double stop, anti-splinter profile, and end support 1) Sawing: cross-cutting - 2.2 kW (3 HP), blade speed 3,000 rpm - Saw blade Ø400 mm, bore Ø30 mm - Cutting depth adjustment 140 mm 2) Top and bottom planing cutterheads with carbide knives: - Cutterhead with W3 carbide knives, Ø160xL140 mm - Top head 3 kW / bottom head 2.2 kW, rotation speed 4,500 rpm - Independent manual fine adjustment for withdrawal or positioning: Top cutterhead axial movement: -40/+35 mm, vertical travel 0-135 mm Bottom cutterhead axial movement: -40/+10 mm, vertical travel 0-80 mm 3) Spindle moulder: Cpodpfx Acewxdb Ns Neu - Power 5.5 kW, speed 4,000 rpm - Spindle Ø50 mm, useful length 160 mm - Vertical travel 150 mm, horizontal travel 130 mm - Max. tool diameter (tenoning discs) Ø350 mm 4) Shoulder head (cutterhead) for left and right operation: - Power 2.2 kW (3 HP), speed 4,500 rpm - W3 carbide knife cutterhead Ø160xL140 mm - Manual fine adjustment for withdrawal, positioning, and travel OTHER TECHNICAL FEATURES: - Main power supply: 3-phase + N + PE, 400V, 50Hz - Installed power: 15.1 kW (20.5 HP), rated IN 30A - Counters for manual operational adjustments - Pneumatic supply: 6 bar working pressure (for hold-downs) - Dust extraction ports and recommended airflows: 360 (saw) + 2500 (cutterheads) + 1250 (spindle moulder) + 2500 (shoulder head) m³/h Air velocity 25-30 m/s Manifold supplied, 1 connection, flanged edge 280 mm. If shoulder operation is used, provide for branching: 160F/150F/150F flex hoses - CE marking, automatic retraction of guards, braked motors, padlockable main isolator, emergency stop buttons Transport dimensions (LxWxH): 3.70 x 1.70 x h.2 m Weight: 1650 kg

Year of construction: 1974, condition: ready for operation (used), A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible. Cpjdpfowmqw Tox Ac Neu

Condition: used, Year of construction: 1994, functionality: fully functional, total length: 6,800 mm, total width: 2,400 mm, total height: 2,000 mm, table length: 2,200 mm, Universal grinding machine type USM with milling and sanding units UNIVERSAL MILLING AND SANDING MACHINE TYPE UFSM Suitable for machining straight and profiled edges on panel-shaped workpieces, the ends of strips and posts, stair treads, etc. Design: 1. BASE MACHINE, length: approx. 6,800 mm, machine table length: 2,200 mm for a maximum workpiece length of 2,000 mm, drive for automatic table reciprocating motion, feed rate in the range of 4 - 40 m/min. Continuously adjustable 2. Workpiece clamping device TR, 0-80 mm 3. Profile milling unit, working from below, P = 3.7 kW and n = 6000 rpm 4. Profile milling unit, scanning from above, P = 1.5 kW and n = 6000 rpm 5. Sanding unit S 2000 K, for grinding straight edges, P = 2.4/3.0 kW Cpsdpfx Aewf U Awjc Nju 6. 2 x Sanding units S 2000 x 60 DF, for grinding the lower and upper radius, P = 0.6/0.9 kW 7. Digital electronic, travel-dependent tool control for precise tool insertion and removal, independent of the feed rate

Condition: used, Year of construction: 1991, functionality: fully functional, total height: 3,888 mm, total length: 10,207 mm, total width: 4,498 mm, type of input current: three-phase, filling opening width: 2,200 mm, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was reliably in production operation until the end of June 2024. Despite its age, it still provides a solid foundation for use in manufacturing applications. Technical Details and Features: Year of manufacture / Last use: In production until the end of June 2024 Control system: Original condition, fully functional Condition: Used, but in good technical condition Strip feeder: Modern strip feed for efficient material handling Drive: Equipped with robust drive couplings Clutches: Fitted with large clutches featuring cup seal technology, as found in the latest machine design – ensuring reliable power transmission Compaction: Compaction units correspond to proven standard design Crimping rollers: Used profile and condition, but well maintained – no major damage Conveyor belts: Used, but in working condition Viewing panels: Made from Makrolon, should be replaced The machine is currently dismantled but can be inspected. Codpswzk Alefx Ac Nopu Summary: This machine is ideally suited for companies seeking proven and reliable technology at an attractive price. Thanks to the modern strip feed and up-to-date clutch technology, efficient production processes remain possible. With manageable maintenance requirements (e.g. replacement of the Makrolon panels), the machine can be quickly integrated into existing production lines. Inspection by appointment possible.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 122009984, travel distance X-axis: 3,850 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, rotational speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! For milling, drilling and thread cutting work on aluminum, PVC and thin-walled steel profiles for applications in window, facade and metal construction! Csdpfx Aevyg Szec Nepu CONDITION Spindle: New bearings Frequency converter: Recently replaced Tool change: Automatic tool change requires a new sensor - little effort TECHNICAL DETAILS Areas of application: Aluminum, PVC and steel processing Software/control: PC-based EluCam software Processing area X-axis travel: 3,850 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rates (rapid traverse) X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Places: 8 Vices Number: 12 pneumatic double vices Safety equipment Included: light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m

Condition: ready for operation (used), De plaatdikte is afhankelijk van het profiel. Cpodpfx Asygyvwjc Neu dop: 0,5 1,5 mm 7 stations vermogen: 2,4 kW gewicht: 430 kg

Condition: new, functionality: fully functional, Year of construction: 2026, New hydraulic profile bending machine from manufacturer MAC Bending. Model: ARM45H. Optional equipment: Two speeds. Digital read-out. Rolls for pipes, angle profiles, and various other profiles. Warranty: 1 year. Delivery time: 7 weeks. Other models from the catalogue are also available, please email M2Trade. Should service be required, it will, of course, be provided by M2Trade. Thanks to its durable and reliable design, maintenance is kept to a minimum. Cpodpeya T Hvofx Ac Nju