Used Profile Knives for sale (6,390)

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture Nwjdjyi T Aiopfx Ahvjd – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel Nwedpfx Aheyi Hrwsvjd - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: used, Year of construction: 2004, operating hours: 1 h, double pallet fork Nodpjymt Dhjfx Ahvswd

Condition: used, Year of construction: 2013, operating hours: 1 h, double pallet fork Nedpfx Ajymtzmehvswd

Condition: used, Year of construction: 2016, operating hours: 521 h, double pallet fork Nwedsymtzgopfx Ahvjd

Condition: ready for operation (used), Thicknesser SAC RS53 4 knives Specification: • working width - 530 mm • working height - 240 mm • 5.0 kW engine • 4-knife shaft for traditional knives • analog thickness indicator • 2 feed speeds • full, straight pulling shaft in front of the planing shaft • two steel outgoing rollers behind the planing shaft Njdpewgdghsfx Ahvswd • sliding roller in the lower table • manual up/down adjustment • table supported by 1 solid piston • original painting • sawdust extraction outlet fi 140 mm • weight approx. 800 kg • dimensions 92 x 100 x 160 cm (length x width x height) Additional information: • the photos show the actual condition of the item for sale • the device can be switched on and checked on site.

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Njdpfx Ahjxdxk Tjvjwd Specification: • Condition – used, after inspection • Working width – 530 mm • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Year of construction: 2019, condition: used, functionality: fully functional, Profile and tube bending machine. Sets of rolls for pipes 1/2", 3/4" and 1". Nodpfx Ahoymmd Ievewd

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) Nwjdpjymbfysfx Ahved - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position Njdpfxoxf Uudo Ahvewd - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Nwsdpfx Ahew I Tt Ssved Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm Nsdsx Sylqopfx Ahvswd - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min Nodpoyh Nzpsfx Ahvswd - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: used, Year of construction: 1993, Well-maintained CNC profile grinding machine from a screw factory Nwodewt Uqdspfx Ahvjd For details, please contact us.

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nsdpfel Nbqcjx Ahvswd Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Year of construction: 2010, condition: used, functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Nodpfx Aow Dzagohvswd Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Nwedpfx Ahsyhgkdsvsd Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: used, tool width max. ca. 230 mm mounting mandrel 30 / 35 /40 /50 /60 mm Nwedow Au Rcopfx Ahvod grinding speed stufenlos einstellbar Weinig Rondamat 931 manual planer blade grinding machine for sharpening and grinding profile blades and straight planer blades in the planer head using templates.

Condition: used, grinding wheel diameter max. 225 mm diameter of tools max. 300 mm tool diameter min. 80 mm Weinig Rondamat 929 knife grinding machine for manufacturing profile knives. Production from a straight blank or regrinding of used knives using a template. Nwedslf H Tgepfx Ahvjd Max. tool width: 230 mm Includes new coolant pump.

Condition: used, Spindle diameter 50 mm Spindle length 320 mm Nwedpfelf H S Aex Ahvjd Motors 2 x 11 kW + 2 x 3 kW

Condition: used, Spindle diameter 50 mm Spindle length 320 mm engine 2 x 11 kW und 3 x 3 kW For profiling and milling windows, doors, individual parts, and similar items with circumferential profiles, including return transport. Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic. 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, Nedpfolf H Sujx Ahvswd 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Condition: good (used), Year of construction: 1962, Manufacturer: VEB Nwedpfeltiy Tsx Ahvsd Type: RV16 Machinable cross-section: 120 x 140 mm Weight: 2,7 t

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Nwodpswcqmajfx Ahvsd Manufacturer: Peddinghaus Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: new, Year of construction: 2025, The Senfeng T series profile lasers are Senfeng's entry-level model for processing profiles. The machine frame can be equipped with a wide range of jaw plates and machine bed lengths. The machine can also be equipped with a 2.5D cutting head or 3.0D (Bevel) cutting head. With Senfeng we offer fiber lasers at a competitive price with service from our own mechanics. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. Technical data: - Laser Power: Up to 6,000 watts - Laser Wave length: 1020 nm – 1080 nm - Maximum tube length: up to 15200 mm - Maximum profile weight: depending on the jaw plates and length of the machine bed - Tube cutting capacity: Ø 8-350 mm - Tube cutting capacity: 8x8 - 350x350 mm - Chuck rotation speed: Depending on the jaw plates - Axes speed: Depending on the jaw plates - Operating voltage: 400V / 50Hz ± 5% - Tailing (residual material): 70 mm - Cutting gases: Oxygen, Compressed air, Nitrogen ===== In addition, the machine is equipped with the following options: - Control: TubePRO - Follow-up supports controlled by a ball screw. This means that unequal profiles are continuously supported and you can process material more accurately - Valve for collecting small pieces. This is opened and closed in the control with an air cylinder - Pneumatic jaw plates, for fast and precise clamping - Various automations possible - Aviation aluminum beam - Laser source: Max Photonics or IPG - Cutting head: Depending on power - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit Nodpfx Ahjvvh Ngsvewd

Condition: good (used), functionality: fully functional, Year of construction: 1978, Equipment: foot remote control, Performance data: Sectional steel shears: L-steel 90° cut 80 x 8 mm L-steel 45° cut 50 x 6 mm Section steel cutter: L-steel 90° cut 60 x 6 mm T-steel 90° cut 60 x 7 mm L + T steel 45° cut 50 x 6 mm Special knives: U-steel 80 mm I-steel 100 mm Flat steel 80 x 12/ 120 x 8 mm Round steel cutter: Round steel 28 mm Square steel 25 x 25 mm Nwjdpfxshx Ekpj Ahvjd Flat steel shear 100 x 11/10 mm triangular notcher 8 mm strokes: 36 1/min drive: 2,2 kW weight: approx. 450Kg Incl. base frame as shown All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.