Used Profile Knives for sale (6,607)

Condition: ready for operation (used), A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. Dedpjttv Trefx Ac Noun

Condition: ready for operation (used), Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. On-site inspection is possible. Duedpfowgnf Usx Ac Njn

Condition: ready for operation (used), Year of construction: 2018, Machining sides: 3, workpiece materials: aluminium/steel, travel X: 4000mm, feed rate: 120m/min, A-axis: +/-110°, spindle speed: 18000rpm, tool holder: SK30, tool positions: 8, max. profile dimensions X/Y/Z: 4000mm/250mm/190mm, machine dimensions X/Y/Z: approx. 5750mm/2100mm/2350mm, weight: approx. 4000kg, control: Mecal. Documentation available. On-site inspection is possible. Djdpeyh Nv Hjfx Ac Nsun

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Duodpfx Aetqfqxec Non

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Dusdpfexfknaox Ac Non

Condition: new, shaft diameter: 60 mm, – Shaft diameter 60 mm – The lower two rollers are hydraulically adjusted – Usable in horizontal/vertical position – Three driven rolls – NC control (7-inch touchscreen) – 2 speeds Dujdjyh R Hajpfx Ac Nsn – Brake motor – Overload protection system – Roller diameter Ø177 mm – Emergency stop – Documentation – 400V

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Djdpfx Acexizanj Neun

Condition: excellent (used), Year of manufacture: 2004 Comprises: 4 punching units and a forming line with 20 roll-forming stations, Dodjygkw Espfx Ac Nsun including welding and punching.

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door - 6 pneumatic clamping bridges Djdpfx Acsyhzire Neun - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: Dujdpfx Ajyga T Njc Njn • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: used, TECHNICAL DETAILS Duodpfeyhrl Hox Ac Nsn - - X,Y travel: 110 x 55 [mm] - - Digital display on X and Y

Condition: ready for operation (used), Year of construction: 2019, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 408 0019 001, - Automatic, computer-controlled screw driving machine Profile reinforcement clamping is managed by the computer Profile dimensions and screw driving intervals can be set via the screen Pneumatic screw feeding and automatic screw driving Dujdpjyhluzjfx Ac Nsn Automatic system for limiting screw driving depth depending on the profile

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Dujdpfx Acoyhf R Ne Nen Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Saw for profiles, used Manufacturer: Weber - Kronach Type: PS 2 Year of manufacture: 2002 Profile section: max. 200 x 100 mm (W x H) Saw blade diameter: 400 mm Connection load: 5,0 kW. Spannung: 400 V, 50 Hz Dusdpfxoyhcl De Ac Nen Condition: very good, like new

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Dedpfoyhckasx Ac Noun Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Dujdpfxoyhcabs Ac Nsn Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg Duedpfxsxnymko Ac Nsn ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: good (used), Year of construction: 2000, CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 Dsdefrbckepfx Ac Njun grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT Duedsh I Nw Depfx Ac Njn HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: new, Year of construction: 2026, saw blade diameter: 350 mm, cutting range round steel at 90°: 90 mm, rotational speed (max.): 100 rpm, cutting range square steel at 90°: 80 mm, Equipment: cabin, documentation/manual, rotational speed infinitely variable, Fully Automatic Magazine Tube and Profile Cutting Saw Machine General Description The fully automatic magazine tube and profile cutting saw machine is designed for industrial production lines to perform cutting operations on round tubes, square, and rectangular profiles. With its PLC-controlled color touchscreen, precision servo-driven feeding system, and patented anti-vibration construction, it offers high accuracy, extended saw blade life, and continuous production performance. The magazine structure and programmable cutting functions allow cutting at different lengths on the same material, minimizing operator dependency. Key Features - Fully automatic magazine tube and profile cutting saw machine - PLC-controlled color touchscreen - Material feeding system controlled by servo motor and ball screw - Vertical cutting system moving on a linear rail, driven by servo motor and ball screw - Variable cutting speeds: - Slow on material entry - Fast during cutting - Slow again on exit - Patented system eliminating saw blade backlash: - Eliminates vibration and resonance - Prevents saw blade breakage - Extends saw blade life - Saw speed variable between 20 – 100 rpm (inverter controlled) - Single-stroke feeding and cutting up to 1000 mm - Ability to cut up to 10 different lengths on the same material Dusdpfjyg H Nqsx Ac Nen - High-performance gearbox suitable for continuous operation - Length accuracy of ±0.2 mm (may vary depending on the runout of the saw blade) Cutting Capacity (Tube & Profile) - Maximum saw blade diameter: 350 mm - Cutting angle: 90° Round Tube: - Min. Ø15 mm – Max. Ø90 mm Square Profile: - Min. 15 × 15 mm – Max. 80 × 80 mm Rectangular Profile: - Min. 15 × 15 mm – Max. 80 × 80 mm - Minimum Remnant Length: 120 mm Technical Specifications - Main Voltage: 400 V - Control Voltage: 24 V - Installed Power: 7.64 kW - Current: 26.6 A - Saw motor: 4 kW - Cooling oil pump: 0.09 kW - Air Pressure: 6 kg/cm² (240 l/min) - Saw Speed: 20 – 100 rpm (inverter controlled) - Cutting Angle Rotation: 90° Saw Blade Specifications - Saw Blade Diameter: 350 mm - Bore Diameter: 32 mm - Pin Holes: 2 × Ø11 - Coating Options: - TiN: Medium hardness steels - TiCN: High rigidity steels - TiAlN: Stainless steels Machine Dimensions & Weight - Width: 8800 mm - Depth: 2300 mm - Height: 2020 mm - Net Weight: 2750 kg - Gross Weight: 2790 kg

Condition: used, functionality: fully functional, Year of construction: 2021, We offer you this used CNC tube bending machine AKYAPAK ABM 76 CNC 1, year of manufacture 2021, currently located in Spain. Available immediately. Machine specifications: Max. bending diameter: 76 mm Max. material thickness: 3 mm Max. bending angle: 180° Max. bending radius: 260 mm Operating speeds: Feed speed: max. 1000 mm/s Rotation speed: 150°/s Bending speed: 30°/s Machining tolerance: Feed: 0.1 mm Rotation: ±0.1 mm Dujdpfjygwr Nsx Ac Nsn Bending speed: ±0.5 mm Hydraulic system: Hydraulic motor power: 7.5 kW Maximum hydraulic pressure: 180 bar Processing length: 2000 mm Oil tank capacity: 120 l Standard accessories: Programmable in YBC mode Touchscreen Manual and automatic operation Tube length calculation possible based on part program Hydraulic axes

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 Duedpjwv Havjfx Ac Njn - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Dsdpfxowvgide Ac Neun Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Condition: excellent (used), functionality: fully functional, overall weight: 700 kg, working width: 520 mm, number of blades: 4, working height: 250 mm, type of input current: three-phase, number of planer blades: 4, GRIGGIO PSA 520 thicknesser Specifications: - condition - used - manufacturer - GRIGGIO - model - PSA 520 - max working width - 520 mm - max working height - 250 mm - length of worktop - 985 mm - power of main engine - 6,0 kW - total power - 6,75 kW - shaft for 4 system knives TERSA - sliding roller in the lower worktop - pulling roller - spiral - two steel rollers behind planer shaft - electrical up/down adjustment - analogue planing thickness indicator - diameter of planer shaft - 120 mm Dedpfevgm Upsx Ac Nsun - planer shaft speed - 5000 rpm - 2 feed speeds - diameter of the exhaust stub - 150 mm - weight - approx. 700 kg - overall dimensions - 115 x 110 x 120 cm ( W x L x H )

Year of construction: 1986, condition: excellent (used), I sell Profile Grinding Machine Reckmann LM 161. Grinder in very good condition, little used. Duodpfx Acsuyg Rno Njn