Used Profile Grinding for sale (9,318)

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use Tjdpfoxr N Rmex Ab Djd TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: used, Minimum wire diameter: 3.0 mm Maximum wire diameter (depending on tensile strength): up to 6.5 mm at ≤1600 N/mm² up to 7.5 mm at ≤1200 N/mm² up to 10.0 mm at ≤800 N/mm² up to 13.0 mm at ≤600 N/mm² Tjdpfjxr Ncvsx Ab Ded Maximum wire feed speed: approx. 40 m/min Wire feed length: unlimited (limited only by part length and space) Maximum coil diameter (closed ring): 1000 mm Distance from bending head center to machine front panel: 1000 mm (working depth) Minimum distance between two bends: ≥ 3 × wire diameter Power consumption: up to 18 kW (peak), approx. 10 kW (typical operation) Compressed air pressure: 6 bar Compressed air consumption: 1–30 L/min (depending on configuration) Machine weight: approximately 7500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 297003, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (top) diameter: 155 mm, side roll diameter: 155 mm, overall weight: 400 kg, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Equipment: documentation/manual, emergency stop, foot remote control, swiveling upper roller, SAHINLER PK 50+ tube and profile bending machine with digital bending indicator. The machine is in very good technical condition. Price net plus 23% VAT (applicable within Poland). Tedpfoxr Dnyjx Ab Djd

Condition: good (used), Year of construction: 1994, Grinding belt size: 100x1830 mm Max. external dimensions: Tsdjxr Dcdopfx Ab Djd Width: 1200 mm Depth: maximum approx. 900 mm Support table/depth approx. 600 mm Weight: approx. 200 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 1,234 h, functionality: fully functional, grinding length: 600 mm, grinding width: 350 mm, Surface grinding machine by Geibel & Hotz - Year of manufacture: 2000 - Equipped with PLC control - Grinding area: 600 x 350 mm Todexqg Tpspfx Ab Dod - Magnetic area: 600 x 350 mm The machine is still in operation and can be made available at short notice upon agreement. An inspection is possible at any time. Collection by the buyer (assistance with loading is possible – forklift truck is available).

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 6190, grinding wheel diameter: 150 mm, table length: 720 mm, table width: 200 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates you to collect the machine on schedule between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Table dimensions: 720 x 200 mm Grinding wheel diameter: 150 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Tsdpfxexqg E So Ab Djd Control voltage: 220 V Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 1,700 mm Weight: 2,000 kg EQUIPMENT Magnetic chuck (450 x 200 mm) RSF three-axis digital readout BRAILLON magnetizing and demagnetizing station JUNG adjustable magnetic chuck (120 x 90 mm)

Condition: new, Year of construction: 2025, CORMAK SM150D Belt Grinder The CORMAK SM150D belt grinder is an industrial machine designed for intensive operation in production plants, locksmith workshops, and tool rooms. It is a metal belt grinder that combines high grinding efficiency with an effective dust extraction system, ensuring safety, cleanliness, and comfort in everyday use. Its solid steel construction and large worktable surface guarantee stability and precision, even when processing large components. Main Advantages Two belt speeds (14.5 / 29 m/s) – allows adjustment of speed to the type of material and nature of work (coarse or finishing grinding). Integrated dust extraction system – ensures a clean and safe working environment without the need for external dust collection units. Stable steel construction – effectively reduces vibrations, improving repeatability and machining quality. Large worktable (480 × 150 mm) – allows comfortable handling of larger workpieces. Stepless grinding angle adjustment – enables precise positioning of the belt relative to the workpiece. Quick belt change system – minimizes downtime and improves work efficiency. Design and Technology The stationary CORMAK SM150D grinder is built on a welded steel frame, ensuring rigidity and resistance to dynamic loads. The integrated extraction system provides highly efficient removal of dust and grinding debris. A 2.8 kW motor delivers sufficient power for demanding machining tasks. Precision and Efficiency Tsdoxrzgtjpfx Ab Ded Thanks to the use of a 150 mm wide and 2000 mm long belt, the machine provides a large contact surface, reducing processing time and increasing efficiency. The two belt speeds allow for a quick switch from aggressive material removal to fine surface finishing. The ergonomic design and spring-loaded belt tensioning system ensure proper belt tension throughout the work cycle. Applications The CORMAK SM150D metal belt grinder is suitable for use in: production plants working with steel, stainless steel, and aluminum, welding and locksmith workshops, surface preparation and finishing departments, grinding edges, welds, and flat surfaces. Standard Equipment Stable steel base with tilt adjustment Grinding belt 2000 × 150 mm Built-in dust extraction system with bag and Ø100 mm ports Spark and dust protection cover Adjustable protective shield Technical Specifications Parameter Specification Abrasive belt dimensions (L × W) 2000 × 150 mm Belt speed 14.5 / 29 m/s Motor speed 1400 / 2800 rpm Motor power 2.8 kW Machine dimensions (L × W × H) 700 × 540 × 1130 mm Weight 90 kg Power supply 400 V Extraction port diameter 2 × Ø100 mm Worktable dimensions 480 × 150 mm Chip bag diameter Ø100 mm Chip bag length 500 mm

Condition: good (used), Year of construction: 1974, Ref. -No.: 10159 Tjdpfxoxqdzwe Ab Dsd Manufacturer: KELLENBERGER Type: 1000 U Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2400 mm Measurements depth 2000 mm Measurements height 1900 mm Machine weight 6000 kg Control Unit Brand FANUC Model 21i-MB Additional Equipment Kraft & Bauer Fire extinguishing system, Type FB703S-UV3-TFM70°/KLA 6-S-MV / Knoll microfilter, Type Micro Pur 240 F / Streuli lifting station, Type SHSRT300-TL142/180 This TSCHUDIN ecoLine 400 centerless grinding machine was manufactured in 2013. It features a Fanuc 21i-MB control system, a grinding wheel with a max outer diameter of 400 mm, and a regulating wheel with a speed range of 0-265 rpm. Additional attachments include a Kraft & Bauer fire extinguishing system and a Knoll microfilter. Consider the opportunity to buy this TSCHUDIN ecoLine 400 centerless grinding machine. Contact us for more information about this machine. Application Types Tsdpfx Abow H Txfj Dsd Grinding

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m Tsdpovbgr Refx Ab Dsd The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 70292, grinding length: 500 mm, grinding wheel diameter: 400 mm, grinding diameter: 200 mm, workpiece weight between centers: 15,000 g, bar passage: 270 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine within the specified period from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Grinding wheel diameter: 400 mm Maximum workpiece passage: 270 mm Maximum grinding diameter: 200 mm Tedpfx Aoxqgb Tsb Dod Grinding length between centers: 300 – 500 mm Maximum workpiece weight between centers: 15 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,000 mm Weight: 2,000 kg EQUIPMENT HEIDENHAIN digital readout Matching workbench with contents Suitable grinding wheels Arbors Suitable spare parts

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand FANUC Model §==I Main Drive Number of axis 5 Table Number of tslots 7 Inner width 14 mm Table load 800 kg This 5-axis HAUSER KELLENBERGER H55-400 was manufactured in 2019, designed for precision internal grinding. Ideal for complex geometries, it offers advanced control for high accuracy. Consider the opportunity to buy this HAUSER KELLENBERGER H55-400 internal grinding machine. Contact us for more information. Tjdpfxexp Sq Rj Ab Dsd Application Types Grinding

Condition: used, Technical details: Tjdpsw Rktbefx Ab Dsd grinding diameter: 550 mm grinding length: 2600 mm centre height: 250 mm swing diameter: 500 mm grinding wheel diameter: 750mm,Breite 80mm , Bohrung 304,8mm mm coolant device: 90 l/min weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 384, grinding wheel diameter: 250 mm, table length: 1,300 mm, table width: 500 mm, overall weight: 1,500 kg, jaw width: 160 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! Tsdpfoxqf Uxsx Ab Ded TECHNICAL DETAILS Table dimensions: 1,300 x 500 mm Magnet dimensions: 1,020 x 450 mm Grinding wheel diameter: 250 mm Jaw width: 160 mm MACHINE DETAILS Electrical Data Operating voltage: 380 V Control voltage: 220 V Rated current: 25 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 1,900 mm Weight: 1,500 kg EQUIPMENT 3 T-slots Magnetic chuck Various grinding wheels Vice Belt filter system

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min Tsdpfxeu Ng Ncs Ab Ded total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 005121946, grinding length: 1,850 mm, table load: 2,700 kg, travel distance X-axis: 2,000 mm, grinding wheel speed: 1,450 rpm, controller model: SIEMENS SINUMERIK 840 Di, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Submitting a bid obliges the buyer to collect the machine within the specified period: between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Longitudinal travel: 2,000 mm Longitudinal grinding length: 1,850 mm Table dimensions: 1,700 x 600 mm Longitudinal feed speed: 1 – 40 m/min Cross travel: 915 mm Maximum cross grinding width: 1,050 mm Adjustable cross feed speed: 0 – 4 m/min Stepped cross traverse: 0 – 40 mm Max. vertical grinding height: 700 mm Grinding wheel speed: 1,450 rpm Grinding wheel dimensions: 450 x 100 x 203 mm Permissible table load: 2,700 kg MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 Di Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 56 A Connection: 10 kA Dimensions & Weight Dimensions (L x W x H): 7,000 x 3,300 x 3,000 mm Weight: 13,800 kg EQUIPMENT Magnetic chuck (1,500 x 800 mm) Note: Transport on a truck with a width of 3,000 mm is possible. Tedpfx Abjxqf Sqe Dod

Condition: used, Technical details: grinding spindle - swivable: ja ° spindle revolutions per minute : 2850 U/min work table:: 50 x 134 x 44 mm table movement: X= 265 mm table movement: Y= 165 mm dimensions of grinding wheel: Bohrung Ø 20 mm voltage: 380 V / Hz machine weight approx.: 113 kg Tedpou Ng N Asfx Ab Djd dimension machine xH: 0,63 x 0,56 x 0,64 m Grinding machine for twist drill cutting angle 30° / 40° Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 100mm for clearance angle 40° and 90°, 3x clamping devices, prism 14mm, as well as test device with 12mm prism and magnifying glass 90mm adjustable Column rotatable 360° Grinding protection 2x 220V sockets *

Condition: not inspected (used), functionality: unexamined, grinding wheel diameter: 120 mm, overall weight: 200 kg, table length: 290 mm, table width: 180 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the item within the specified period from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Table dimensions: 290 x 180 mm Grinding wheel diameter: 120 mm MACHINE DETAILS Tjdpfx Aoxqf Rgsb Djd Dimensions & Weight Dimensions (L x W x H): 1,130 x 550 x 1,700 mm Weight: 200 kg

Condition: used, Year of construction: 1991, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 500 mm grinding height: 500 mm throat of the spindle nose: Vertikalweg: 500 mm distance spindle center to table: min./max.: 200 / 700 mm table adjustment: längs: 500 mm table adjustment: quer: 270 mm table surface area: 500 x 230 mm table feeds: quer: fein/grob = 0,001 / 0,015 mm/Hub Todpfx Asu Ngnxsb Dsd magnetic plate size: 508 x 25 mm grinding spindle speed: k.A. U/min weight of the machine ca.: 1,4 t dimension machine xH: 1,8 x 1,5 x 1,8 m dimension coolant device LxWxH: 0,8 x 0,5 x 0,8 m dimensions of hydaulic: L: 700 x Ø 500 x H:800 mm A grinding wheel with Ø 160 x 12 mm is currently clamped to the grinding machine. Operation via control panel with extension arm Programmable grinding wheel infeed Surface grinding and plunge grinding possible Coolant system with container combined with grinding dust extraction Machine lighting Machine base feet *

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 6471, grinding wheel diameter: 200 mm, overall weight: 1,000 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Magnet dimensions: 450 x 220 mm Grinding wheel diameter: 200 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 15 A Dimensions & weight Dimensions (L x W x H): 3,000 x 1,500 x 1,700 mm Tjdpfxexqf E Rj Ab Ded Weight: 1,000 kg EQUIPMENT DIAFORM dressing device

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390/455 mm feed: quer: 0,3-3,5 mm Tedpfou Nggzox Ab Dod table adjustment: längs 1150 mm table speed: 2,5-25 m/min Table dimensions: 2120 x 600 mm magnetic plate size: 1000 x 315 x 100 mm table surface area: 1160 x 315 mm feed of spindle: 0,002 - 0,05 mm distance table - spindle center: max. 550 mm throat of the spindle nose: 200-580 mm grinding spindle speed: 1500 / 3000 U/min total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 1,3x1,4x1,95 m dimension coolant device LxWxH: 0,7x0,7x0,55 m - coolant device (Tank with pumps) - 2 pieces grinding disc intakes - 4 pieces machine base i.D. *

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 160,000 rpm, table load: 800 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the successful bidder to collect the machine within the specified timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis travel: 900 mm Y-axis travel: 600 mm W-axis travel: 635 mm Z-axis travel: 180 mm U-axis travel: 6/20 mm Distance between columns: 950 mm Clearance table to spindle: 735 mm Main spindle diameter: 100 mm Tool holder: E 23 E 19 EF 6 Work Table Table dimensions: 1,020 x 860 mm T-slot width: 14 mm Tjdpfx Absxqfk Ts Djd T-slot spacing: 100 mm Table load capacity: max. 800 kg Taper grinding: max. 16° Digital readout X/Y: 0.001 mm Basic deviation X/Y at 20°: 0.004 mm Spindle speed: from 4,500 to 160,000 rpm Planetary movement (Z-axis): 5 to 250 C-axis NC drive: 0 – 5 Feed X and Y-axis feed: 0 to 1,500/3,000 mm/min W-axis feed: 800 mm/min Z-axis feed: 0.5 – 12,000 mm/min MACHINE DETAILS Control: CNC 311 Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection rating: 8.5 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various grinding tools Clamping devices High-frequency grinding head BÜCHE ENF 4000 extraction unit

Condition: not inspected (used), Year of construction: 1984, functionality: unexamined, machine/vehicle number: 0175, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 80,000 rpm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. By placing a bid, you commit to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Distances Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 140 mm Travel W-axis: 500 mm Travel U-axis: 6/20 mm Clearance between columns: 750 mm Clearance from table to spindle: 600 mm Main spindle diameter: 100 mm Work Table Table dimensions: 770 x 630 mm Table load capacity: max. 500 kg Taper grinding: max. 16° Digital readout X/Y-axis: 0.001 mm Positioning accuracy at 20°: 0.004 mm Spindle speed: from 9,000 to 80,000 rpm Feed Feed rates X and Y-axis: 0 – 3,000 mm/min Feed rate W-axis: approx. 800 mm/min Feed rate Z-axis: from 15 to 6,000 mm/min MACHINE DETAILS Control: HAUSER Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection: 8 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various abrasives Selection of high-frequency grinding heads Todpoxqd Htsfx Ab Ded Büche ENF 4000 extraction unit

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 80,000 rpm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Placing a bid obligates the buyer to collect the item promptly between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Tsdpfxsxqcuve Ab Dod Travel Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 140 mm Travel W-axis: 500 mm Travel U-axis: 6/20 mm Work Table Table dimensions: 770 x 630 mm Table load: max. 500 kg Spindle speeds: from 9,000 to 80,000 rpm Feed rates X- and Y-axis: 0 – 3,000 mm/min Feed rate W-axis: approx. 800 mm/min Feed rate Z-axis: from 15 to 6,000 mm/min Clearance between uprights: 750 mm Clearance from table to spindle: 600 mm Main spindle diameter: 100 mm Taper grinding: max. 16° Digital readout X-/Y-axis: 0.001 mm Positioning accuracy at 20°: 0.004 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Power: 7 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Tool holders E 19 and F 6 Including matching workshop cabinet with contents Contents include various grinding abrasives High-frequency grinding heads Clamping devices Extraction system Büche ENF 4000

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, grinding wheel diameter: 150 mm, jaw width: 70 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to company closure. Submitting a bid commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Magnet dimensions: 500 x 200 mm Grinding wheel diameter: 150 mm Jaw width: 70 mm MACHINE DETAILS Dimensions & Weight Tedpfexqb D Aex Ab Djd Dimensions (L x W x H): 3,000 x 1,500 x 1,600 mm Weight: 700 kg EQUIPMENT Matching workbench with sine magnetic chuck Various grinding wheels Precision vise