Used Probst Easy Clean for sale (10,888)

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Ijdpoxcnxdefx Ah Neht Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: new, Year of construction: 2025, Al-Ko clean air deduster Exhibition piece (no operating hours yet - new) Technical data Power Unit 250 P Intake manifold: 250 mm Ijdpfx Ahjbuvbrs Noht Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece At an absolute special price Location: From stock Bitburg Ihsdecdy Ndjpfx Ah Nst

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Isdpjcqy I Ssfx Ah Neht Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning Ihedpfx Ascnw U Deh Net All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Ihsdpfjhkztwsx Ah Njt Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Iodpfedqzhhjx Ah Nsht Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Ijdpjcdy I Tjfx Ah Njht Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2026, The captivating advantages: Ihedpfjcnz Iqjx Ah Net Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. As a guide value, the cardboard labyrinth filter, depending on

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction Iodpfx Asw Sgnkjh Nsht - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: as good as new (ex-display), Year of construction: 2026, The impressive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and a pleasant working environment due to diagonallow-turbulence air-stroemung. Iodpfxsdqc U Ho Ah Nsht Large detection window thanks to air guide plates – thus also suitable for larger factory troughs. Separation degree of paint mist up to 99%, return ability of the pre-filter up to 18 kg/m2 - thus great filter life! Easy and fast filter change on the front. Cost-cost replacement filters. Low acquisition costs and low energy requirements. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as post-filter unit. Ex-fan incl. throttle valve attached to the left. Do not compromise on the quality of the surface. Suction-weighing Easy Paint are the ideal cost-effective application for the effective detection and filtering of the paint mist as well as the suction of the solvent dimempfe. Robust and powerful but economical in consumption. Thanks to the IPE double filtration system, two filter levels ensure a maximum separation degree of up to 99%. Thanks to the folded filter pockets, the cardboard labyrinth filter absorbs considerably more overspray (up to 18 kg/m2 filter area) than conventional filter mats. The downstream fiber glass fiber second-based filter absorbs only the finest residual particles. As a guideline, the cardboard labyrinth

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake port : 300 mm nominal motor power : 7,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 6000 m³ / h Nominal volume flow : 5.089 m³ / h Negative pressure 2.587 Pa Filter area 30 m² Ihjdsh D If Hspfx Ah Nst Dimensions (L x W x H) in mm 3.000 x 1.361 x 2.817 Briquetting capacity 30 - 50 kg / h Briquette diameter: 50 mm Weight: 1570 kg Machine is brand new in our STOCK - IMMEDIATELY AVAILABLE - subject to prior sale Location: 54634 Bitburg

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Isdpecdy I Rofx Ah Neht Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Ihsdocnw T Iopfx Ah Nst Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock Isdpfx Ahohkzt Ne Noht subject to prior sale

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100 % air recirculation Residual dust content < 0.1 mg/m³ Low noise emission Longer filter life Easy emptying Supplied ready to plug in With rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Intake port: 300 mm Nominal motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow 4,900 m³ / h 6,000 m³ / h Nominal volume flow: 5.089 m³ / h Ihodshkzu Aepfx Ah Not Negative pressure: 2.280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Cellular wheel capacity:15.816 L / h Weight:920 kg Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Iodshkzttjpfx Ah Noht Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Subject to prior sale Iodpfxscdr E As Ah Noht

Condition: new, Year of construction: 2026, Type and specifications The distinctive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working environment by diagonal low-turbulence airflow. Iodpfx Aheb R D U So Noht Large capture window by air deflectors - suitable even for large workpieces. Separation of paint mist up to 99%, rear retaining capacity of the filter up to 18 kg / m ² - big filter booth time! Quick and easy filter change on the front page. Low-cost replacement filters. Low cost and extremely low energy consumption. Dry spraying wall of galvanized steel with welded base frame, cardboard labyrinth as a preliminary filter and glass fibre filter as a post filter unit. Grown ex fan incl. throttle links. Make no compromises in the quality of the surface. Suction walls easy paint are the ideal low-cost solution for the effective detection and filtering of paint mist, as well as extraction solvent vapours. Robust and powerful but economical in use. Standard suction power of easy paint 3500 model 600025 air performance on standard delivery * 3500 m ³/h filter surface primary 2,5 m² filtration area secondary 2.0 m ² power motor 400V/50 Hz * ex 1,1 kW Connection pipe suction pipe D 300 mm width in mm = 2750 overall height 1455 mm Depth in mm with capture window 855 weight in kg 145 Stando

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. Ihsdpfxsrbf R Ts Ah Net - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. - Cleaning the corners of PVC profiles after welding - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles - Fully automatic operation with PLC Isdpforbid Iox Ah Njht - 3 different blade attachment possibilities - Automatic case wing profile separation feature - Ability to automatically center and square the profile

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed • CNC control system (2 axes) • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools • Cleaning of upper and lower surfaces for both white and colored profiles • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles Iedpfxjrbg Euj Ah Nsht • Easy profile programming (handwheel) • Adjustable working speeds to desired levels

Condition: ready for operation (used), Year of construction: 2011, power: 29 kW (39.43 HP), 2 heated tanks of 300 liters, one tank for cleaning and the other for rinsing. Isdpfx Ahetr Dn To Njht oil skimmer is in the cleaning tank the machine is also equipped with suction comes with 2 stainless steel carts. Machine is working properly. the diameter of the table is 1000mm, usable height 600 mm

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. Ihedpfx Ahod Hbp As Nst - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump Isdpst Rrkefx Ah Njht - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car