Sheet metal cleaning machine

Jeros 5011/828

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Njdpfxsxpf I No Alnjcu Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW +++ NEW 3 & 4-Edge Sheet Metal Cleaning Machine NEW +++ NEW Operated by 1 person Stainless steel version, mobile Maximum sheet metal size: up to 600 x 800 mm Removable collection tray at the bottom Dimensions: 2234 x 630 x 1372 mm, L x W x H The versatility of the tray/sheet metal cleaner is also evident in its ability to process 4-edge trays with an edge height of up to 24 mm. Contaminants collect under the cleaner on a pull-out, easy-to-empty shelf. The unit is fully mobile and can be easily moved to the desired location after work is completed. The entire structure is shot-blasted, ensuring that the surfaces are as smooth and hygienic as possible. Connection: 400V, 16A-CEE plug New unit With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Sheet metal cleaning up to 600 x 1000 mm Greasing/oiling for sheet metal Service package Delivery service Instruction and commissioning Nedpfsw S Slnjx Alnecu Visit us!

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg Nedpfx Aljirax Uenocu

Condition: excellent (used), KD-PUTZ with oil lubrication Completely made of stainless steel Sheet metal polishing machine for perforated sheets and regular sheets with 2 edges For 60x80 sheets, edge on the short side In top condition Connection: 16 Ah Nsdpfx Asgh A Svslnecu

Condition: good (used), 724 USED WP Matador MD 125 deck/shelf oven with baking area: 12.5 sq m. Gas or oil burner. EXTERNAL DIMENSIONS (in cm): -W: 183, -L: 386, -H: 252. CHAMBER DIMENSIONS (in com.): -W: 120, -L: 200, EQUIPMENT: -gas/oil burner, -5-chamber. ​ The device is in our warehouse (36-068 Bachórz Poland). Njdpfx Alerqikmonscu Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Year of construction: 2016, condition: reconditioned (used), For sale is 1 hood-type dishwasher from Meiko, model DV 80.2, manufactured in 2015/16. Condition: Good, has been used partially with soft water. No dosing unit included! These machines are former lease units. Various configurations are available, potentially with internal salt softener, with GIO module, or completely without softener. Please let us know how you would like your package to be assembled. The quoted price is a base price depending on the equipment—request your individual offer! Comes with a 6-month spare parts warranty. Preventive maintenance with replacement of several wear parts has been performed regularly. Inspection and test run on site is possible and encouraged. Technical Data: Output: up to 60/40/17 racks (equals approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program cycle times: 60/90/210 seconds Rack size (mm): 500 x 500 Entry height: 440 mm Tank capacity: 22 L Water consumption per rack: 2.6 L Tank heating: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: Stainless steel Ncsdpfep Ebn Dox Alnou Connected load: 400 V / 11.2 kW (cold water), 9.7 kW (hot water) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical Installation: Electrical connection: 3-phase current, 3 NPE, 400 V, 50 Hz. The electrical setup complies with VDE regulations. Water Installation: The dishwashers can be connected directly to the mains water supply without additional safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. Installation regulation EN 1717 must be observed. Drain: ¾". On-site wall drain max. 700 mm height. Length of connection hoses approx. 1.8 m from machine. Collection of the machines is preferred. Shipping via freight company is possible at buyer’s expense.

Condition: refurbished (used), Key features of the device: Flexible, modular device concept Configuration of the device according to the specific requirements of the products Stainless steel design Can be combined with a sheet loading robot Variable outputs Ncedstrwfujpfx Alnju Automatic production sequence Repeatable product quality Dividing range: 40 - 75 gr Capacity: max. 4000 pcs/hour Dimensions: 2600x1125x2550 mm

Condition: excellent (used), machine/vehicle number: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM Equipment / Additional information: With heating Ncedpfevf Iubjx Alnsu Also very interesting for the textile industry

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Nsdpfxew A Iilo Alnocu Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) Njdpfxerbz T Ns Alnjcu - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal