Visipraktik VKR-ES-DN 12/3K Isobarometric Filler

Vipoll Druckfüller

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Gedocx Smbopfx Akyekc Product Pump: Inlet check valve of the product Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. Pressure : 6 bar incl . electronic control incl . booster pump

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details - Output - 800 bph (at 0.33l) Gedpfx Akju I Hr Ujyokc - 750 bph (at 0.5l) - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process - Single or double CO2 flushing - Siemens S7 control system with touch panel - Operating hours: 725 hours

Condition: new, functionality: fully functional, For the gentle preservation of liquid foods with or without carbon dioxide in pre-filled bottles, jars, pouches, or cans. Depending on the type of container, 240–360 l/h can be pasteurized. A wide range of bottle shapes can be used (milk bottles, beer bottles, preserving jars, etc.). The desired product temperature and holding time can be electronically controlled between 0 and 99 minutes. The display is clear and easy to operate. Nominal heating capacity: 20,000 W (up to 360 l/h) Connected load: 20.15 kW Electrical connection: 400V 50Hz (3-phase, 16A) External dimensions: Gkodpfxjw Aw T Te Akysc Length: 2214 mm Width: 870 mm Height (= working height): 1090 mm Water bath internal dimensions: Length: 1770 mm Width: 800 mm Maximum bottle height: 330 mm Empty weight: 220 kg Water capacity: approx. 345 l

Condition: used, Year of construction: 2022, Overview  This carbonating unit was manufactured in 2022 by German company KH TEC. The machine is designed for beer carbonation. The unit is stopped, still in production condition, and equipped with HMI and automated operation. It is available immediately and can be visited on request. The machine is being sold as it will be replaced by a new system. Gkedpfx Aeyk Ab Dokyjc Technical data - Capacity: 20 HL/hour - Application: Beer - Configuration: Automated, HMI-controlled  

Condition: used, Year of construction: 1978, Pasteurising chamber Length: 1,7 m Godjw Tmugspfx Akyekc Width: 1,7 m Height: 2,7 m Weight: 2 t Material: stainless steel

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 - Output: 1,800 bottles/hour - Number of rinsing nozzles: 9 - Number of filling valves: 8 - Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) - Electrical power: 6 kW, 400V, 50Hz - Dimensions Gksdpfevy D Adjx Akyec - Width: 1,400 mm - Length: 3,200 mm - Complete length with labeler: 8,800 mm - Operating hours: 1,370 hours - Complete documentation available Capper | Arol | TSI-Eagle C | 2016 - Pitch diameter: 410 mm - Number of heads: 1 - Type of closure: Standard crown cork - Complete documentation available

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) - Product types: Beer and other carbonated drinks Gsdpezcu Slsfx Akyekc - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system

Year of construction: 2020, condition: new, Dereater is used for the removal of air bubbles from the purée. The air bubbles mix with purée during the pulping. Godpfx Ajcl Tt Rokyekc Made of stainless steel. Deaeration takes place in a vacuum container. operating temperature approx. 50°C. Water-ring-pump for achieving vacuum in the container integrated. The puree is sucked out by pasteurizer pump. Level switches in the container to control the pump for liquid inlet and outlet. Electricity supply 400V / 50Hz / 16A Power Consumption: 2,2 kW Water supply: approx. 100 l/h

Condition: used, Year of construction: 2004, functionality: fully functional, REF: MM6444 Cimec America AM DPS 9-8-1C-1VA rinser, filler and capper monoblock. Manufacturer: C.I.M.E.C., Italy. Serial number 045, built 2004. CE marked, with EU Declaration of Conformity. A compact monoblock with 9 rinsing nozzles, 8 isobaric (counter-pressure) filling valves, a crown capping head and a ROPP capping head, for still or carbonated drinks in glass bottles. Carbonated product needs to be carbonated before filling. The machine does not include a carbonator. Filling Single pre-evacuation with CO2 bottle purge (not double pre-evacuation) No vacuum pump fitted Up to 2,000 bottles per hour (owner's figure), depending on bottle size and product Capping ROPP (screw cap) head enabled, set up for 28mm ROPP caps on MCA bottle finish Crown capping head disabled. The current owner never used it and its condition is unknown. An engineer would need to assess what is required to bring it back into use Change parts 330ml, currently fitted 200ml Not included Conveyors, drive or accumulation table CIP system Also included Spare seals, wear parts and spares for the filling heads, pedestals, rinser and drive train Spare parts list Condition Last in production in August 2025, when it was fully operational. Now in storage. The owner describes the machine as well used and in working order, but needing an engineer to get it fully up to speed. Videos of it running are available on request. Electrical 400V, 50Hz, 3-phase, 4.5kW Dimensions Approx. 3.5m long x 1.4m wide x 2.1m high (2.6m at the capper) Weight: to be confirmed. Documentation EU Declaration of Conformity and operator manual (English) for this serial number. Location Aylesbury, UK. (in storage) Viewing by appointment Godpfx Aksy Um Anoyokc

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Gksdpfx Akeqvvpaeyec