Used Pressing Line for sale (20,444)

Condition: good (used), Year of construction: 1976, Pressing force: 20 t Stroke rate: max. 150 rpm, adjustable via PIV gearbox from the control panel Stroke, adjustable: 10 - 50 mm Installation height: 270 mm (maximum stroke at top, without wedge plate) Ram reinforcement: 50 mm Table area: 340 x 320 mm (W x D) Pass-through opening: 70 x 180 mm (W x D) Ram area: 160 x 230 mm (W x D) with wedge plate Drive power: 2 HP Features: - 1 connecting rod - Double V-ram guide - Motorized oil lubrication - Manual ram adjustment, 50 mm Ncjdpfx Aewufrzjd Nsl - Mounting bracket for feed unit, tiltable - 3 cams for feed unit etc. - Free-standing control panel - Forward and reverse operation - Manual setup using a rod

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment Ncsdpfx Aodhzf Isd Nel with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 Ncodpfx Aer Iil Esd Njl RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s Nodpfx Adsgtty Tj Nocl table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Splines tool for internal splines

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molds for capsules, manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, manufacturer: ARBURG, model: 720A3200-800, year: 2017 Item 03) Extraction system for 16-cavity capsule, manufacturer: Beck, year: 2019 Item 03) Extraction system IML system for 32-cavity capsule, manufacturer: Beck, year: 2019 Nedpfx Adjw Nriue Njcl

Condition: good (used), Compressed Air Line / Pressure Air Line made of aluminium The stated price is for all compressed air pipes together. Total: approx. 325 m of pipe Sale / delivery of partial quantities is possible! Ncjdpjvv Nvnjfx Ad Nsl

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). Ncjdpsdy Dtrsfx Ad Nel 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Nsdpfjhgbarox Ad Necl Bunker Packing machines TSF-Justinas

Condition: used, Year of construction: 2006, functionality: fully functional, NP 690 - COMPLETE GLASS BOTTLING LINE SIDEL 46,000 bph Product: Mineral Water Speed: 46,000 bph Depalletizer Simonazzi Model: SWEEP-OFF-B Year: 2005 Type: with layer separator Interlayer removal system Pallet storage Saturator Simonazzi Model: CARBOGEA Year: 2005 Speed: 9,800 lph Filling Monoblock Simonazzi Model: EUROSTAR 2000 Year: 2005 Rinser: 84 clamps, fixed nozzle, treated product: water Filler: 84 valves, isobaric filling, mechanical valves 2 Cappers: - 24-head crown cap Ø 26 mm - 24-head aluminum screw cap Bottle Inspector Heuft Model: HBBVXTXXX Year: 2011 Nsdpfx Ajyc Rw Ded Nscl Level and cap integrity check Labeller Simonazzi Model: ALFA TOP BRAIN Year: 2005 32 heads, 3 cold glue stations Applicable label types: • Front • Back • Neck/collar Label Inspector ABULL Model: STRATEC - F300 Year: 2005 Shrink Wrapper SMI Model: SK800F Year: 2005 Version: film only Type: film only Double-lane for 3x2 bundles Shrink Wrapper SMI Model: SK600P Year: 2005 Version: film with tray Types: film and tray 20/24 pcs (4x6) Palletizer Simonazzi Model: KOMBI Year: 2005 Type: push-type palletizer Interlayer system Pallet storage Pallet Wrapper ROBOPAC Model: ROTARY Year: 2005 Wrapping type: rotating arm Bottle conveyor belts Bundle conveyor belts

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours 2. CAP30 cap applicator for Helicap23 Pro26 Nedpfxsycwvao Ad Necl 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer 5. Tetra Shrink TS51 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Condition: used, Year of construction: 2016, functionality: fully functional, USED COMPLETE BOTTLING LINE KHS 54,000 BPH Product: Still Water Speed: 54,000 BPH Year: 2016 KHS INNOPET BLOWFILL MONOBLOCK Preform Hopper Preform Elevator Preform Orientator PET Blow Molding Machine: Chiller Labeling Machine 2 stations with roll-fed PE modules Direction of rotation: counterclockwise Electronic cam plates Filler Capper Type of workable cap: pre-threaded plastic Distribution system: pick & place Caps Elevator Caps Orientator Bottle Inspector KHS Shrink Wrapper Model: Innopack Kisters SP Version: film launch 6 Lanes Bundle 6x4 Only film KHS Palletizer Dual Robotic Arm Ncjdpfx Adox Urmxe Nsl Clamping, lifting Pallet storage Interlayer system KHS Pallet Wrapper Rotating arm Pre-stretch Code: NP 696

Condition: used, Year of construction: 2001, functionality: limited functionality, feed length X-axis: 30,000 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 500 mm, FOR SALE 3 3 Forest gantry milling machines as discussed. Below are the specifications for these machines: Nodpfx Aex R Ta Eed Necl - Models: Type V2 2500 EAS and Type V3 2300 AS - Capacity: 30,000 mm (X) x 2,400 mm (Y) x 500 mm (Z) - Equipment: Equipped with 2 heads REFURBISHED IN 2001 CNC NUM 1060 General Specifications Below are the common specifications of the machines discussed: Models concerned: Forest Type V2 2500 EAS and Type V3 2300 AS. Working dimensions (Capacity): X axis (longitudinal): 30,000 mm (30 metres). Y axis (cross): 2,400 mm (2.4 metres). Z axis (vertical): 500 mm (0.5 metres). Head configuration: The machines are equipped with two machining heads.

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder Ncodpfx Adjdkf I To Nsl -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Homag parquet flooring line Lenghwise FPR 225 minimum wide 135mm Maximum wide 400mm 5+5 motors suitable for click Ncedpfxsx Sxzws Ad Nsl HOMAG FPR 226 CROSSWISE minimum lengh 400mm Maximum length 1500mm( could by modified to 3000mm) 5+5 motors suitable for click

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Njdpfetix S Nsx Ad Necl Very well maintained, continuously serviced condition!

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Rondo Doge Bread & Pastry Line. Year of production 2006. Total length 16.7m (Machine 11.55m + tables 5.15m) Width 1.80m (working width 0.7m) Height to hopper 3m. Total height 4.05m Efficiency: 600kg per hour - from 2500 pcs to 7500 pcs of products per hour for square, triangular and flat products Ability to produce a very thin continuous line of dough - from 1 mm to 24.5 mm. Ncedpfxjwn Hhqo Ad Nel - Dough portioning hopper - 3 sprinklers - 2-roll dough extruder - calibrator - satellite sheeter - flour sprinkler - cross roller - longitudinal plate assembly - dough folders - pneumatic guillotine Machine connected to the power supply and ready to work.

Condition: new, Year of construction: 2025, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Ncjdogmhxaopfx Ad Nol Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment CHRISTMAS DISCOUNT

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine Nedpfx Astzmifsd Njcl -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms Ncedpfx Adorrglye Njl -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: used, Year of construction: 2017, NP 683 | USED KHS CAN FILLING LINE 25,000 CPH Capacity: 25,000 cans per hour Products: Beer and carbonated soft drinks Can format: 500 ml; 211/202 Year of manufacture: 2012, 2017 Current condition: Still installed – machine powered. Can be inspected in dry cycle. Available for dismantling: November 2025 Packaging: Cans will be packed in trays with shrink film. Line components: Njdpfexd Ap Hex Ad Nscl - Bulk can depalletizer: Linker DPG-500, year: 2012 - Can inspector: Transtech Hysek, year: 2012 - Can conveyor: Linker Conveyor RC/KHS, year: 2012 - Rinser: Linker Triplex Rinser TR/KHS, year: 2012 - Flash pasteurizer: KHS Innopro 140/14/85, year: 2012 - Filler: KHS Innofill Can DVD, year: 2017 - Seamer: Ferrum F08, year: 2012 - Lid feeder: NSM Lidserver A30, year: 2017 - Conveyor: KHS Innoline BTR, year: 2012 - Fill height inspector: KHS Innocheck CUB, year: 2012 - Blower: Europool - Tray packer: KHS Kisters SP0502, year: 2012 - Tray pack conveyor: KHS Innoline GTR, year: 2012 - Handle applicator: KHS CSM 050-2, year: 2012 - Packing machine: KHS Innopack 035 B2+FS A-L, year: 2012/2017 - Palletizer: KHS Innopal PBL1N1, year: 2012 - Pallet stretch wrapper: SIAT MFP, year: 2017 - Pallet conveyor: KHS Innoline PTR

Condition: used, Year of construction: 2013, Bottling Filling Line for Oil PET Year: 1995 | 2013 Speed: 6,000 bph on 1 L Cap: 29/21 mm Preform feeder Compressor for chiller moulds MTA Nr.1 Blower Kosme KSB 3000 Nr.2 Blower Kosme KSB 3000 Air conveyors Kosme Filling/capping monoblock ICS – 6,000 L/h Labeller ICS cold glue Shrink wrapper SMIPACK Shrink pallet wrapper Zlatorog KAESER high-pressure compressor Code: NP 537 Nsdpjq Ttuqofx Ad Nscl

Condition: like new (used), Year of construction: 2004, functionality: fully functional, COMPLETE ASEPTIC TETRA PAK TBA LINE Year: 2004 Output speed: 8,000 packs/hour Filling machine: Tetra Pak model TBA/21 TPA 500 SO Packaging type: Tetra Brik Aseptic (TBA) Format: 500 ml Prisma Speed: up to 8,000 packs/hour Aseptic filling technology: Hydrogen peroxide sterilization Packaging material feed: Roll-fed carton Ncodpfsv Ay Uuex Ad Njl Touchscreen operator panel Cap applicator: Tetra Pak model TETRA PAK APPLICATOR 45 Cap type: TwistCap or LightCap Cap application: Fully automated Hot melt glue system: Nordson Problue 4 Cap elevator: Tecno Vibrazioni Packing unit: Tetra Pak model TETRA CARDBOARD PACKER 70 Secondary packaging: Tray or box packing Hot melt glue system: Nordson Problue 10 Inkjet coder: Videojet Coding type: Expiry dates, lot numbers Conveyor system: Total length approx. 65 meters

Condition: excellent (used), Used Bottling Line | used Beverage Line | soft Drinks NP 643 | PET LINE FOR JUICES Speed: 9,000 Bph composition: Bottle elevator Bottle unscrambler Rinser Year 2011 Number of grippers 50 Type of double treatment Type of fixed nozzle Monoblock 30-valve filling machine 10-head capper Caps elevator HEUFT bottle inspector X-ray for bottle bottom inspection Ncodpfx Adsuhzlae Nsl Tapes Bundler Year: 2011 Film-throwing type Available sizes: 250 ml, 330 ml, 500 ml and 750 ml User manuals and wiring diagrams present

Condition: used, Year of construction: 2010, functionality: fully functional, NP 687 | COMPLETE PET BOTTLING LINE SIDEL FOR CARBONATED DRINKS Product: Carbonated water and soft drinks Production speed: 13,500 bottles per hour (BPH) PET Preform Presses – Sameto - Model: EBH 2050 - Year: 2010 PET Blower – Sidel - Model: SBO10 - Year: 2010 - Neck finish: ø28 1881 - Number of cavities: 10 Air Conveyor – Alsim - Year: 1999 Monoblock – Alsim - Model: Asmojet 1T RV-P 48/60/10K - Year: 1999 - Rinser: 48 clamps, 1 water treatment - Filler: 60 isobaric valves - Capper: 10 heads Mixer – Alsim - Year: 1999 - Output: 30 m³/h Bottle Dryer – ACI - Year: 2015 Labeler – Krones Contiroll - Model: Contiroll - Year: 2004 - Type: Rotary labeler - Number of stations: 15 - Label type: PET wrap-around - Label feed: Roll-fed Shrink Wrapper – Acmi - Model: Fenix - Year: 2019 - Configuration: Film launching, film only Handle Applicator – Smipack - Model: HA 35-50-70 - Year: 2002 Palletizer – Alsim - Model: Valiant 1I 1P - Year: 1996 - Fully automatic, push-type system Pallet Wrapper – PM Pragometal - Model: OBS Rotomatic Standard - Year: 2009 Nedpfx Adsxz Aytj Nocl

Condition: used, Year of construction: 2011, functionality: fully functional, COMPLETE BOTTLING LINE Product: Beer, water, and lemonade Output: 6,000 bph Rotation: Clockwise Depalletizer: Flema Star C-CL Year: 1996 Capacity: 500 cph Operating mode: Pneumatic, gripper with hooks Decrater: RICO UNO Nedpfx Asx Ngqbsd Nocl Year: 2010 Capacity: 350 cph Number of heads: 1 Number of pick-ups per head: 20 Interchangeable heads: - 1 head for NRW 0.5 l bottle - 1 head for 0.33 l Ale bottle - 1 head for NRW 0.5 l screw-cap bottle Decapper: ADELSKI Year: 1995 Capacity: 12,500 bph Cap type: Crown cork Washer-Dryer: Macero PAC CB 14-0.5l-R-7 LII Compact Year: 1998 Capacity: 7,500 bph Construction: Fully stainless steel Includes steam heat exchanger Bottle Inspector: SYSCONA Alkali LC 10 FD + Metal Detection Year: 2007 Capacity: 15,000 bph Monoblock: ICS-ARKOR Model: multiFILL-VK 24/6CR/6RA Year: 2011 Capacity: 6,000 bph Rotation: Counterclockwise Filler: 24 valves Filling system: Isobaric 2 Cappers: - Crown cork, 6 heads (pick-on-the-fly) - Aluminium screw cap, 6 heads (pick-on-the-fly) Labeler: ANKER Model: 1191/99/420R Year: 1999 Output: 7,000 bph Type: Rotary Rotation: Counterclockwise Number of plates: 8 Number of stations: 2 Labeling method: Cold glue Applicable labels: • Front • Back • Neck Case Packer: RICO Model: UNO 1-Head L-Machine Year: 2012 Capacity: 300 cph Number of heads: 1 Number of pick-ups per head: 20 Head type: Fixed Palletizer: Flema Model: Star C-LC Year: 1996 Capacity: 500 cph Product handled: Crates Head type: Magnetic Case Washer: RICO 2500 1-Bad Year: 2012 Capacity: 600 cph 2 CIP tanks of 600 liters each Year of manufacture: 2012 Steam heated for filler CIP, with plate heat exchanger Safety features included Code: NP 688