Used Bagging Line for sale (17,360)

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. Dcjdpovw Egrjfx Ab Tjr 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Condition: used, Year of construction: 2012, functionality: fully functional, The plant comprises the following components:  Platform with a vibrated base for the bin support; this platform is protected by perimeter railings and is accessed via a ship-type ladder;  Empty bag magazine; the supply of empty bags is performed manually by the operator. The exact position of the bags is secured by adjustable side guides; a sensor located under the stack of bags signals when the pile is depleted;  On the structure of the empty bag magazine, pneumatic cylinders are installed for gripping the bag, opening its mouth, and inserting it onto the product dosing spout. The bags are handled by a series of suction cups. The pneumatic control panel QP1 is also mounted on the supporting structure of the magazine;  The dosing spout is supported by 3 load cells; at the outlet, a bucket-type gate valve driven by two pneumatic cylinders is installed. Next to it, two additional cylinders with hooks at the ends are used for tensioning the bag mouth. Dodpoxrcc Aofx Ab Tocr  The bag is clamped along its longer side by two jaws that hold it after filling and guide it to the sewing machine. Movement is achieved by geared motor units and wheels sliding on chrome-plated rods. At this stage, the bag rests on a motorized conveyor belt for transfer; this belt is also raised via a pneumatic cylinder so that the bag rests gently upon filling completion; the height of this belt can be adjusted manually using a handwheel acting on four jacks, to adapt the belt height to the bag type.  Once inserted into the sewing machine, the bag is stitched and the thread cut; still resting on the conveyor, the bag reaches the overturning station—there, it is held by two jaws, rotated 90°, and finally released so as to be parallel to the conveyor.  The next belt features, in its initial part, a series of square rollers for bag straightening, followed by a conveyor belt for forward movement;  Lastly, there is the roller conveyor where the bag is picked up by the robot; this conveyor is stopped by a photocell when the bag reaches the end of the roller line;  The robot gripper is of the comb type and is equipped with a translation cylinder to discharge the bag and two cylinders operating a plate to lock the bag during handling prior to discharge.  Two boxes containing the solenoid valves and vacuum units are installed on the plant;  An electrical control panel manages the entire plant; the operator panel and weighing module are installed on it;  The robot is managed by its own control panel with a dedicated operator interface;

Condition: ready for operation (used), Year of construction: 2008, The machines can make stand up pouches with zip lock from foil. It was in operation till August. Stand-up pouch sizes :min 100x40x150h | max 300x200x400h mm, speed: 40-60 bags per minute. The complete bagging line is also for sale, it includes Ishida 14 weigher in nclosure, Wiese bucket elevator, Phantom metal detector, Prisma check weigher, feeding hopper for powders, Impulse vibratory feeder, all are from 2008. Dcedpju Uvqqefx Ab Tjr

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Dsdpolkc U Eofx Ab Tecr

Condition: used, Gainsborough bagger and All-Fill powder depositor. Dcedpfx Abovvppho Tor

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: no 1, total height: 2,000 mm, total width: 100 mm, total length: 8,000 mm, overall weight: 1,500 kg, year of last overhaul: 2022, high capacity, packing possible from both sides. 20 rolles of plastic will follow this machine Djdpfxox Dtgpj Ab Tocr

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Line was implemented & wasnt used for serial production yet except FOT production. Quite new. It contains below processes : Dsdpfx Ajw Upppsb Tocr Robotics ArcWelding Cell With 3 Axis Turn Table x 2 Qty 2S-1100 Robotics ArcWelding Cell X 1 Qty Knuckle Bracket and Spring Seat Fixture x 4 Qty Stab Bracket Fixture X 2 Qty Knuckle Bracket Projection Welding System X 1 Qty Automatic Base Cap and Knuckle Bracket Assembly System X 1 Qty Drilling And Press Machine with Industrial Robot X 1 Qty Leakage Test System X 1 Qty Marking System X 1 Qty

Condition: excellent (used), Stainless Steel Cut to Length Line Djdpfewbzbxsx Ab Tscr • Coil Weight: 2 tonnes • Coil Width: 100 – 500mm • Cut Length: 150 – 500mm • Thickness: 0.30 – 1.0mm • Max Coil O/D: 500mm

Condition: used, Year of construction: 2010, functionality: fully functional, NP 687 | COMPLETE PET BOTTLING LINE SIDEL FOR CARBONATED DRINKS Product: Carbonated water and soft drinks Production speed: 13,500 bottles per hour (BPH) PET Preform Presses – Sameto - Model: EBH 2050 - Year: 2010 PET Blower – Sidel - Model: SBO10 - Year: 2010 - Neck finish: ø28 1881 - Number of cavities: 10 Air Conveyor – Alsim - Year: 1999 Monoblock – Alsim - Model: Asmojet 1T RV-P 48/60/10K - Year: 1999 - Rinser: 48 clamps, 1 water treatment - Filler: 60 isobaric valves - Capper: 10 heads Mixer – Alsim - Year: 1999 - Output: 30 m³/h Bottle Dryer – ACI - Year: 2015 Labeler – Krones Contiroll - Model: Contiroll - Year: 2004 - Type: Rotary labeler - Number of stations: 15 Dsdpfxjxz Ayte Ab Tocr - Label type: PET wrap-around - Label feed: Roll-fed Shrink Wrapper – Acmi - Model: Fenix - Year: 2019 - Configuration: Film launching, film only Handle Applicator – Smipack - Model: HA 35-50-70 - Year: 2002 Palletizer – Alsim - Model: Valiant 1I 1P - Year: 1996 - Fully automatic, push-type system Pallet Wrapper – PM Pragometal - Model: OBS Rotomatic Standard - Year: 2009

Condition: used, functionality: fully functional, Year of construction: 2018, Sandwich panel line, roof 30, 50, 80, 100 mm, wall 50, 80 mm, facade 50, 100 mm Dcjdpfxexcinaj Ab Tjr

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material Dcsdpfxexdbwie Ab Tjr - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Condition: new, functionality: fully functional, Year of construction: 2025, 🚧 50-600 T/H Sand & Gravel Production Line – Transforming Raw Materials into High-Quality Aggregates! 🚧 🌟 General Introduction Looking for a reliable and efficient solution for your sand and gravel production needs? Our 50-600 T/H Sand & Gravel Production Line is a high-performance system designed to meet the diverse requirements of construction, infrastructure, and industrial projects. Whether you need coarse aggregates or fine sand, this production line ensures precision, efficiency, and scalability. --- 🏗️ Wide Range of Applications Our sand and gravel production line is perfect for: - Construction Projects: Producing aggregates for concrete, asphalt, and roadbeds. - Mining Operations: Processing various ores and minerals. - Infrastructure Development: Creating high-quality materials for bridges, dams, and highways. - Commercial Sand Supply: Meeting market demand for sand and gravel in bulk. --- 💎 Key Advantages ### 1. High Capacity & Versatility - Produces 50-600 tons per hour, easily scaling to match project demands. - Handles a wide range of raw materials, including limestone, granite, basalt, and river stones. ### 2. Advanced Technology - Incorporates cutting-edge crushing, screening, and washing equipment for consistent quality. - Optimized for energy efficiency, reducing operational costs. Dcsdpjq Nywxefx Ab Tsr ### 3. Customizable Solutions - Configurable to meet your specific requirements, from particle size to layout design. - Offers flexibility in combining different crushers (jaw, cone, impact) and vibrating screens. ### 4. Durable & Low Maintenance - Built with robust materials to withstand heavy-duty operations. - Easy-to-maintain design minimizes downtime and extends equipment lifespan. ### 5. Environmentally Friendly - Features dust suppression systems and water recycling units to reduce environmental impact. - Promotes sustainable practices in aggregate production. --- 🚜 Your Complete Solution Our production line includes: - Primary Crushing: Breaks down large rocks into manageable sizes. - Secondary Crushing: Refines materials to desired specifications. - Screening Equipment: Ensures uniform sizing and quality control. - Washing System: Removes impurities for cleaner, higher-grade aggregates.

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, LINE GICAMILL S24/6000 gantry milling machine from 1990. CNC NUM 760F. X 6000, Y 2600, Z 1000. Table size 6000 x 2000 mm. Distance between columns 2445 mm. Clearance under crossbeam 1335 mm. Spindle 35 kW, 1620 rpm. Siemens motors. Dcedpfjxu U Rwox Ab Ter

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Dcedpfx Abjw A Ng Es Tor Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: like new (used), Used Filling Line NP 657 | COMPLETE PET AXETIC BOTTLING LINE Year: 2011 Speed: 500 ml 30,000 bottles/hour 1000 ml 24,000 bottles/hour 1500 ml 18,500 bottles/hour Production: fruit juices and tea Filling method: aseptic, volumetric Filling temperature: 18-24°C Sizes: 500 ml, 1000 ml and 1500 ml Bottle type: PET bottles Stopper for bottle Standard 28 mm Product: still only Sterilization type: aseptic sterilization PET Blow Molding Machine Krones Contiform Series 3 Krones Aseptic Filling Monoblock Steriljet sterilizer Dcodpfx Abouyhdvs Tjr Variojet Rinser Filling machine Capper Aseptic Ventilation Isolator VARIO DOS LIQUID ASEPTIC Hygiene Center Sterile Water Treatment AQUA ASEPT Bottle Coding Matrix Laser DDC3 Checkmat FM-X+L fill level sensor PCS process control system KZE product treatment (plate), sterile tank, rework container CIP-System cleaning system Condensate lifting system Krones Contiroll labeler Krones Variopac shrink wrapper Twin Pack handle applicator Krones Robobox Palletizer SYNCO Bottle Conveyor Belts

Condition: used, Rain gutter, downpipe and elbow forming machines, complete line. Three machines. 1. Rain gutter forming machine, strip cutting with band saw. Produced gutter diameter: 80 x 100 mm Used sheet metal dimensions: Width: 350 mm. Thickness: 0.43 – 0.55 mm. 2. Downpipe forming machine, can form 127 mm and 152 mm (standard) sizes. Cutting with guillotine. Used sheet metal dimensions: Width: 300 mm. Thickness: 0.43 – 0.55 mm. Dcedpev Evctsfx Ab Tjr 3. Elbow forming machine: 400V/3 If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), total height: 1,350 mm, total length: 2,680 mm, total width: 2,350 mm, throat depth: 500 mm, empty load weight: 1,800 kg, Volledig automatische lintzaag met bundelklem en automatische invoer CNC gestuurde hoekpositionering werkstukbreedte in bundelklem: 0-300 mm werkstukhoogte in bundelklem: 5-300 mm enkele materiaaltoevoerlengte: 0-600 mm herhaalde materiaaltoevoerlengte: 0-9999 mm Dcjdpfx Ajxbui Tsb Ter maximale snijcapaciteit (90°, rond): 320 mm maximale snijcapaciteit (90°, rechthoek): 500 x 300 mm rechter versteksnede (45°, rond): 320 mm rechter versteksnede (45°, rechthoek): 310 x 310 mm rechter versteksnede (30°, rond): 200 mm rechter versteksnede (30°, rechthoek): 200 x 180 mm linker versteksnede (45°, rond): 320 mm linker versteksnede (45°, rechthoek): 300 x 230 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4200 x 34 x 1.1 mm

Condition: new, Year of construction: 2025, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. Dedpoq N U Dusfx Ab Tjcr - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Rondo Doge Bread & Pastry Line. Year of production 2006. Total length 16.7m (Machine 11.55m + tables 5.15m) Width 1.80m (working width 0.7m) Height to hopper 3m. Total height 4.05m Efficiency: 600kg per hour - from 2500 pcs to 7500 pcs of products per hour for square, triangular and flat products Ability to produce a very thin continuous line of dough - from 1 mm to 24.5 mm. Dcsdewn Hhqopfx Ab Tsr - Dough portioning hopper - 3 sprinklers - 2-roll dough extruder - calibrator - satellite sheeter - flour sprinkler - cross roller - longitudinal plate assembly - dough folders - pneumatic guillotine Machine connected to the power supply and ready to work.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, COMPLETE ASEPTIC TETRA PAK TBA LINE Year: 2004 Output speed: 8,000 packs/hour Filling machine: Tetra Pak model TBA/21 TPA 500 SO Packaging type: Tetra Brik Aseptic (TBA) Format: 500 ml Prisma Speed: up to 8,000 packs/hour Dedpfsv Ay Uujx Ab Tscr Aseptic filling technology: Hydrogen peroxide sterilization Packaging material feed: Roll-fed carton Touchscreen operator panel Cap applicator: Tetra Pak model TETRA PAK APPLICATOR 45 Cap type: TwistCap or LightCap Cap application: Fully automated Hot melt glue system: Nordson Problue 4 Cap elevator: Tecno Vibrazioni Packing unit: Tetra Pak model TETRA CARDBOARD PACKER 70 Secondary packaging: Tray or box packing Hot melt glue system: Nordson Problue 10 Inkjet coder: Videojet Coding type: Expiry dates, lot numbers Conveyor system: Total length approx. 65 meters

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. Dsdpsq Nxrxofx Ab Tocr 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: used, Year of construction: 2010, Bottling Line: Krones CSD Line Year of Manufacture: 2010 Suitable for: Carbonated Soft Drinks Currently Running: Apple Juice with Water and CO2 Container Sizes: PET 0.5 L – PET 1.0 L – PET 1.5 L Neck Formats: PCO 1810 – 28 mm / PSO 28 mm – 1810 – 1881 (Short Neck) Capacity: • 24,000 bottles/hour (0.5 L) • 18,000 bottles/hour (1.5 L) Control System: Siemens Simatic S7-series PLC Operating Hours: approx. 40,000 Krones VarioClean F AUT: Fully automatic CIP system, 4 x 5,000 L, 30 m³/h GEA TDS Processing Plant: Includes flash pasteurizer, mixer, carbonator, degasser, and tanks Preform Hopper and Feeder Conveyors: • Preform Feeding System: Krones Contifeed RS Dcedjxfg Ebjpfx Ab Tsr • Preform Cleaning Unit: Prejet Linear Cap Feeding System: Gassner, includes cap rinsing and sterilisation Blow Moulder: Krones Contiform S12M Ultra Clean Volumetric Filler: Krones 86-22 (Volumetric VODM-PET) with capper Filler Block Cleaning: Krones VarioDos ultra clean Date Coder: Domino DDC 3 (laser) Filling Level Inspection: Krones Checkmat Bottle Conveyors: Krones SYNCO S Bottle Leak Tester: Krones Flowliner Labelling Machine: Krones Contiroll OPP 720-15, double roll feed, hotmelt glue applicator Label Inspection: Krones Checkmat 731 EM Shrink Packer: Krones (Kettner) Variopac TFS 30 (2003) Package Conveyors: Krones Multico S Handle Applicator: Twin Pack Pack Coding: Leisinger Jet 3 (inkjet) Palletiser: Krones Robopox Modulpal (year 2016) Reference Code: NP 647

Condition: excellent (used), Used Bottling Line | used Beverage Line | soft Drinks NP 643 | PET LINE FOR JUICES Speed: 9,000 Bph composition: Bottle elevator Bottle unscrambler Rinser Year 2011 Number of grippers 50 Type of double treatment Type of fixed nozzle Monoblock 30-valve filling machine 10-head capper Caps elevator Dedpjuhzlaefx Ab Tecr HEUFT bottle inspector X-ray for bottle bottom inspection Tapes Bundler Year: 2011 Film-throwing type Available sizes: 250 ml, 330 ml, 500 ml and 750 ml User manuals and wiring diagrams present

Condition: used, Year of construction: 2017, NP 683 | USED KHS CAN FILLING LINE 25,000 CPH Capacity: 25,000 cans per hour Products: Beer and carbonated soft drinks Can format: 500 ml; 211/202 Year of manufacture: 2012, 2017 Current condition: Still installed – machine powered. Can be inspected in dry cycle. Available for dismantling: November 2025 Packaging: Cans will be packed in trays with shrink film. Line components: - Bulk can depalletizer: Linker DPG-500, year: 2012 - Can inspector: Transtech Hysek, year: 2012 - Can conveyor: Linker Conveyor RC/KHS, year: 2012 - Rinser: Linker Triplex Rinser TR/KHS, year: 2012 - Flash pasteurizer: KHS Innopro 140/14/85, year: 2012 Dcjdpfx Aexd Ap Heb Tsr - Filler: KHS Innofill Can DVD, year: 2017 - Seamer: Ferrum F08, year: 2012 - Lid feeder: NSM Lidserver A30, year: 2017 - Conveyor: KHS Innoline BTR, year: 2012 - Fill height inspector: KHS Innocheck CUB, year: 2012 - Blower: Europool - Tray packer: KHS Kisters SP0502, year: 2012 - Tray pack conveyor: KHS Innoline GTR, year: 2012 - Handle applicator: KHS CSM 050-2, year: 2012 - Packing machine: KHS Innopack 035 B2+FS A-L, year: 2012/2017 - Palletizer: KHS Innopal PBL1N1, year: 2012 - Pallet stretch wrapper: SIAT MFP, year: 2017 - Pallet conveyor: KHS Innoline PTR

Condition: used, Year of construction: 2013, Bottling Filling Line for Oil PET Year: 1995 | 2013 Speed: 6,000 bph on 1 L Cap: 29/21 mm Preform feeder Dcedpfjq Ttuqox Ab Tor Compressor for chiller moulds MTA Nr.1 Blower Kosme KSB 3000 Nr.2 Blower Kosme KSB 3000 Air conveyors Kosme Filling/capping monoblock ICS – 6,000 L/h Labeller ICS cold glue Shrink wrapper SMIPACK Shrink pallet wrapper Zlatorog KAESER high-pressure compressor Code: NP 537