Used Press Steam Tables for sale (39,324)

Condition: good (used), Year of construction: 1983, functionality: fully functional, Bürkle U60 Veneer Press Hydraulic Year of manufacture: 1983 The press comes from a training facility and is in good condition. Pressing area: 2200 x 1250 mm Maximum opening: 400 mm 4 cylinders, pressing force: 600 kN Connected load per table heating plate: 7 kW Weight: 3,000 kg Dimensions: 2750 x 1380 x 1785 mm All information without guarantee, errors excepted, all dimensions are approximate. This offer is non-binding. The machine can be inspected by prior arrangement. Subject to prior sale, technical modifications, errors, and changes in specifications, data, and prices. All prices are net, plus VAT, payable in advance including any potential freight costs within 14 days after conclusion of contract. In case of incomplete payment within this period, the seller reserves the right to cancel the purchase contract. Sale is only to entrepreneurs as defined in § 14 BGB (German Civil Code). The machine is sold with the exclusion of any warranty for material defects (as-is). This exclusion does not apply to claims for damages from liability for material defects which result from grossly negligent or intentional breach of duty by the seller or its agents, or for injury to life, body, or health. Any existing third-party claims related to defects will be assigned to the buyer. Please understand that I cannot assume any liability for compliance with any applicable or generally required safety regulations of the machine and its components at your site. Compliance with safety requirements is the responsibility of the final operator. Fpsdpfx Aox Af Sbjfneb All contracts concluded by me are governed exclusively by the law of the Federal Republic of Germany, to the exclusion of CISG (UN Sales Convention). Court of jurisdiction is agreed to be Mannheim.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 28,138 h, bending force (max.): 100 t, number of axes: 7, Amada HFE 100-3 Year of manufacture: 2006 Control system: AMADA OP 2000 Total operating hours: 28,138 h Pressing force: 100 t Fpsdpox Tgr Hofx Afnjb Maximum bending length: 3,100 mm Distance between frames: 2,700 mm Stroke: 200 mm Axes: 7 Throat depth: 420 mm Free space: 470 mm Machine weight: 6,750 kg Equipment: Amada DIGIPRO angle measuring system This press brake is in good technical condition and has been inspected by us. A powered test is possible in our warehouse.

Condition: used, functionality: fully functional, machine/vehicle number: 5081, overall weight: 134 kg, DGUV certified until: 02/2023, pressing force: 3 t, We are selling an eccentric press BMW TP3, year of manufacture unknown, last DGUV inspection 02/2023, fully operational. Fpjdexvqa Rjpfx Afneb

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Press force: 600 kN Weight: 4000 kg Fsdpjp R Ircofx Afnspb Power: 10 KW

Condition: used, Year of construction: 1984, total length: 3,500 mm, total width: 1,400 mm, total height: 2,500 mm, Weight: 6.800 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 12552 - Drive system: Teach-in - Control system brand: Delem - Control system type: DA-22 - Power [kW]: 5.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 80 Fodpfx Afex R S Nrjnjpb - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Motor power: 5.5kW - Transport dimensions: 3500mm x 1400mm x 2500mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Veneer Press OTT JU 2513 - used - new press plates, emergency stop rope, push-button control, anodized plates ----- Technical data ----- Press area: 2,550x1,350 mm, Power per heating plate: 9,100 W, max. opening height: 400 mm, number of cylinders: 4 units Quality info: - Hydraulics checked - Plates replaced - Plates checked for flatness - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use Fpjdpsx R Sydofx Afneb

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Fsdpoq D Dzljfx Afnspb Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

Condition: excellent (used), Shelf length: 250 cm Fpjdjxgnp Dspfx Afnob Width: 130 cm Four actuators

Condition: used, functionality: fully functional, DGUV certified until: 02/2022, Eccentric press Künstner & Hampel, used. The machine is fully functional; however, the ram rod has been welded (see photo). Fpjdpfx Aexv R Uhsfnsb

Year of construction: 1990, operating hours: 30,000 h, condition: ready for operation (used), functionality: fully functional, Used belt press for continuous sludge dewatering for sale Year of construction 1990 Operating hours approx. 30,000 h Description Belt filter press for continuous sludge dewatering Structure of the belt filter press Switch and control system (ROMPF) Fully automatic flocculant treatment plant (ROMPF) NEMO sludge pump (NETZSCH) Technical condition: The plant is completely ready for operation. The entire system was serviced and repaired once a year (documentation/documents available) Mint screen belt as spare part is included. Technical data Manufacturer / type: ROMPF / KR 1700 M Active filter belt length: 8.50 m Active filter belt area: 14.50 m² Fpjder T Hicjpfx Afnsb Drive power: 3.2 kW Working parameters Throughput capacity: 6 - 15 m³/h Discharge dry matter content: up to approx. 25 % dry matter Capacity/h: 0.4 - 0.5 t TS /h Dimensions (trailer with body) Body length: 8.000 m Loading width: 2.420 m Interior height: 2.500 m Mass: 12.00 t (total weight of trailer with body)

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Fjdpfxjwhvq Ij Afnepb Stock range: Paperboard157~2000gsm Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: good (used), Year of construction: 2000, machine/vehicle number: 2000 53, total length: 3,300 mm, working width: 1,320 mm, plate length: 2,750 mm, working height: 80 mm, Equipment: hot water, Sergiani 10-level press Continuously maintained and operated Fodpfx Aex Ezkzjfnspb Cycle time: 25 seconds, resulting in an extremely short open time with a long pressing period – ideal for PVAC Suitable for doors and panels The multilayer press type LAS from Sergiani features a vertically movable pressing block with either seven or ten levels. The system only ever opens one level, while all others remain under full pressing pressure, ensuring a continuous and efficient workflow. The hydraulically-operated press requires very little space, making it suitable for tight production environments. It has a maximum specific pressing pressure of 50 N/cm². With available spare parts and international maintenance service, reliable upkeep is guaranteed.

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9,500 kg Fodpfx Ajq Rdtqsfnepb (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Double-guided, stable, and precise ram - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

Condition: new, Year of construction: 2025, Folding bench ZGR2000/1.2 of company prod - masz locally to the try out and equal to the take. You get professional instruction on the spot. Working width 2140 mm Sheet thickness up to 1, 2 mm Bending angle up to 145° -Forward: 80 mm Gas pressure spring Scala of degree of Velocity for preset bending angle Hanger depth stop Tray for sheets Weight approx. 250kg Accessories - Rollenschere(bis 0,8mm) 350EUR Shipping within Germany 180EUR All prices are inclusive of value added tax. Certificate CE Warranty: 12 months Pickup Fpedpepa Um Ijfx Afnob Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand

Condition: used, Year of construction: 1959, functionality: fully functional, machine/vehicle number: 103559, DGUV certified until: 03/2020, We are selling an eccentric press Müller AMP10, year of manufacture 1959, last DGUV inspection 03/2020. Fpjdpfxexvqdij Afneb

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm ram surface 560x355 mm hole in the table Ø 280 mm Fsdpfx Aolp U Ddofnspb table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear distance between uprights: 2,555 mm Machine length: 3,785 mm Machine width: 2,290 mm Width without support arms: 1,740 mm Overall height: 3,100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration.) Standard equipment: Fedpfsuf Nr Ajx Afnopb - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust, double-guided backgauge - Backgauge fingers double-guided on linear rails - Movable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Foot pedal with emergency stop - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - Delem DA 66t CNC control - R-axis backgauge CNC-controlled - CNC-controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (4 in total) - 1 set of upper and lower tools Further bending lengths and capacities available with appropriate accessories!

Year of construction: 1967, condition: used, pressure 63 t throat 280 mm stroke 8-100 mm no. of strokes 56/84 Hub/min ram - range of adjustment 63 mm table surface area 620x500 mm ram surface 310x260 mm hole in the table Ø 250 mm Fpjdpfxslp U Emj Afnsb table height 850 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t dimensions of the machine ca. 1200x1900x2800 mm

Condition: new, For processing all common aluminium window profile systems such as Schüco, Hueck, Heroal, Reynolds, etc. Universally applicable thanks to double adjustable punching tools. Suitable for corner brackets with groove dimensions from 25 to 60 mm and profile chamber offset from 0 to 40 mm. Continuously height-adjustable feelers, punch blades and stop inserts. Feelers and punching units are equipped with scales. Fpodpfxohmfyho Afneb Retractable stop for easy insertion of profiles, self-adjusting when advancing against the profile. Hydraulic stop locking. Pneumatic pressing operation via a lever system ensures a synchronous punching process. 2 pneumatic hold-down cylinders for clamping the profiles. 2 eccentric discs for positioning the frames. 2 swiveling profile support arms. Operation via 2 foot valves. Includes standard tooling.

Year of construction: 1993, condition: used, pressure 63 t stroke 10-80 mm no. of strokes 65-400 Hub/min ram - range of adjustment 80 mm table surface area 1030x550 mm ram surface 920x450 mm Fpjdpfx Afolp U E Ronob hole in the table 700x200 mm 420 mm weight of the machine ca. 10 t

Year of construction: 1975, condition: used, pressure 125 t Fodpfx Afolp U Dhonepb throat 400 mm stroke 6-125 mm ram - range of adjustment 100 mm dayligth 400 mm table surface area 1100x750 mm no. of strokes 60 Hub/min ram surface 800x550 mm hole in the table Ø 150 mm total power requirement 14 kW weight of the machine ca. 9,0 t dimensions of the machine ca. BxTxH 1500x2200x3500 mm

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm Fpedpfelp U D Esx Afnsb no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Year of construction: 1999, condition: used, pressure 630 t passage width 1390 mm stroke 400 mm table surface area 1390x1250 mm total power requirement 75 kW Fpjdpfx Aelp U R Sofnob weight of the machine ca. 36 t dimensions of the machine ca. BxTxH 3200x2800x4000 mm

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm Fjdpfxjq Rhkwe Afnjpb stroke 150 mm table surface area 600x410 mm ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t

Condition: new, Year of construction: 2024, pressure 50 t throat 230 mm stroke 12-110 mm no. of strokes 40-100 Hub/min ram - range of adjustment 70 mm Fedpfx Aevfhqpofnjpb table surface area 740x440 mm table height 840 mm hole in the table Ø 140 mm ram surface 460x300 mm tool hole in ram Ø 45 mm total power requirement 4 kW weight of the machine ca. 3,4 t dimensions of the machine ca. BxTxH 1500x2500x2510 mm