Used Press Steam Tables for sale (26,516)

Condition: used, Year of construction: 1985, functionality: fully functional, Universal turn & tilt table from MAHO 800 Ppjdpfx Ameb I Irwjkst with mechanical y-adjustment via hand wheel

Condition: good (used), Rear back gauge fingers for Promecam press brakes, adjustable in height. Sold as a complete set or in pairs. Pjdpfezagq Uox Amkjpt

Condition: used, Pressure total: 1200 ton Ppjdpfeyw Rvqox Amkot Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton Ppjdsyw R Adepfx Amkot Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: used, 300 x 37 cm engine 1,6 kW weight 180 kg Ppsdpfxslfcnto Amkjt

Year of construction: 2014, condition: excellent (used), Heating rail TG 200 mO from Herz for heating thermoplastic materials (e.g., acrylic glass). After localized heating, the acrylic glass sheet can be easily bent. Ppsdpfxjzafiij Amkot A video of the machine in operation can be sent upon request. Two-sided heating system with infrared emitters and digital temperature controller, as well as an automatic timer. The timer starts automatically when the upper flap is closed, setting it to the pre-set value. After the set time has elapsed, a warning signal sounds to indicate that the material can be removed. Maximum working width approx. 2000 mm. Maximum sheet thickness, according to the manufacturer, is up to 12 mm due to heating on both sides of the sheet. Connection value: 230 volts / 2800 watts. With a practical parallel stop up to 1000 mm deep. CE marking. Operating manual. Dimensions approx. 2500 x 1200 x 200 mm (L x W x H). Weight approx. 35 kg. The machine can be demonstrated on-site after scheduling an appointment. We only offer machines that are readily available in our warehouse for demonstrations, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm Working height approx. 900 mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Electronic vacuum pressure switch, so the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel castors, lockable Frame can be easily folded open, secured with two latches Ppedey Hl Hpjpfx Amkst Double frame for quick replacement of the membrane. Currently, a new silicone membrane is installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been touched up. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020 mm (L x W x H). Weight approx. 550 kg. The machine can be demonstrated on request at our premises after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider."

Condition: ready for operation (used), Konica Minolta Accurio Press C 4080 with a print run of 7 million copies. Equipped with: FS 532 RU 518 m PF 707m IC 609 Pedpfezadfvox Amkopt As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet shipping to ensure that our customers receive machines in perfect condition. We ship copiers that originate from and are maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Pjdpozacgrjfx Amkspt Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Ppodpezacd Rofx Amkot Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Pedozaccmspfx Amkspt Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW Ppodpfx Ajzacb Njmkot enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, Year of construction: 1991, Plate size: 3600 x 1350 mm Total pressing force: 160 t Specific pressing force: 3.5 - 5.0 kg/cm² Operating pressure max.: 320 bar Pressure cylinders: 8 x 90 St/DM mm Opening width: 400 mm Weight approx. 8300 kg Pedey Hrzmjpfx Amkopt Dimensions: 4130 x 1520 x 2150 mm Functionally tested = new top plates (gold anodized) Location: Nattheim

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Pedpfx Aozab Ibsmkopt Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: new, CATALOG NUMBER RE036 2 axes – electric control for main saw blade lift and tilt with electronic display for height and angle, control panel integrated into the machine body – Brand new, ex-demo machine – DTR + CE documentation included – Cutting width at fence: 1300 mm – Main motor power: 6 kW TECHNICAL DATA - Saw blade tilting: 0-46° - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Spindle diameter: 30 mm - Main blade diameter: 300-400 mm - Max scoring saw diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring saw speed: 8500 rpm - Scoring spindle diameter: 20 mm - Cutting width at fence (standard 1050 mm): 1300 mm - Sawing width using end stops on auxiliary table: 215-3200 mm - Cutting height for 300 mm blade 90°/45°: 90/60 mm - Cutting height for 350 mm blade 90°/45°: 5-115/3.5-80 mm - Cutting height for 400 mm blade 90°/45°: 25-140/15.5-95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle fence – with aluminum bar Net price: 47,000 PLN Net price: 11,300 EUR (based on exchange rate of 4.15 EUR) (Prices may vary with significant exchange rate fluctuations) Ppodpfozabf Hox Amkjt

Condition: excellent (used), Catalogue number 7957 Ppedpfx Amozabcxjkst TECHNICAL DATA - Spindle diameter: 25 mm - Spindle working height: 180 mm - Interchangeable spindle - Spindle locking - Height-adjustable spindle (up/down) - Adjustable fence - 4 spindle speeds + left/right rotation: 3000, 4500, 6000, 9000 rpm - Table dimensions + angle guide: 1010x1010 mm - Motor: 3.8 kW - Extraction port diameters: 100 mm, 80 mm - Dimensions (L/W/H): 1100x1010x1250 mm - Weight: 730 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used milling machine Net price: 4,900 PLN Net price: EUR 1,170 (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders Podpfx Aozabclsmkspt - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: excellent (used), Catalogue number 6763 Pjdpfx Amjzabb Uokept TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm Ppedpfx Amjzaa Umeket - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Max height workable: 1320 mm Podpfx Amsywadwjkopt Max feed speed: 40 m/min

Condition: new, all stainless steel turn table new diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) Ppedpfxszaarls Amkst 1 speed (3 rpm) 0,12 kW also available with variable speed

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 55119214, This is a refrigerated countertop unit from the manufacturer NordCap, which is perfectly suited for insertion under existing cooking blocks or grills. The unit was manufactured by the premium manufacturer Ideal. The refrigerated countertop unit features a built-in stainless steel evaporator and is equipped with four full-extension drawers. The usable height is 90 mm per drawer. Two identical units are for sale. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The unit was only in use for six months and was stored until the end of operation. Used condition is very good. Podpfxevga Dqo Amkopt The RRP is €5,900 net. The stated price is net plus 19% VAT. Our used appliance service for you: •6-month warranty on all electrical parts •High-quality brand-name appliances at fair prices •Professional overhaul/inspection & expert cleaning •Tested & fully functional - or your money back •Shipping or pickup available •Expert advice - before and after purchase •Provision of operating instructions, wiring diagrams & spare parts •Tested according to DGUV V3 Technical specifications: •W x D x H: approx. 1380 x 660 x 410 mm •Power supply: V: 230 / kW: 0.265 •Serial number: 460923-80034645-001 •Year of manufacture: 2019 Condition: used, serviced, fully functional Shipping: •Delivery or self-collection by arrangement •Worldwide shipping on request •Shipping to islands or mountain resorts only by arrangement Do you have questions, require advice, or would like to view something in person? You can reach us by phone during our opening hours: Monday-Friday 9:00 AM - 1:00 PM and 2:00 PM - 5:00 PM.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Psdpfx Asy U Upcjmkopt Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: excellent (used), Great deals on equipment in excellent condition: 2500/1250, 4-cylinder, 90 tons of pressure, electric heating plates. Podpfx Ajy U T Iwomkjpt

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, warranty duration: 24 months, machine/vehicle number: 2026, NEW +++ NEW Bakery Refrigerated Counter BKT 2000 +++ NEW For quick and flexible use Top-quality stainless steel design 600 x 400 mm sheet metal insert Adjustable cooling range from +2 to +8°C Fan-assisted cooling Energy-saving hot gas/condensate evaporation Podpfx Amexp Uguskept Unit is ready for plug-in operation Refrigerant R 600a Connection: 230V Dimensions: 2020 x 800 x 860 mm (W x D x H) NEW unit With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Grids/sheet metal Additional pairs of support rails Maintenance contract Service package Delivery service Instruction and commissioning Visit our large showroom!