Powder coating plant

Braun Vorschub Antrieb

Condition: good (used), Year of construction: 2020, operating hours: 1,730 h, functionality: fully functional, overall weight: 580 kg, total length: 1,335 mm, total width: 750 mm, total height: 1,880 mm, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 66 dB, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Type: Aircenter SK22 Year of Manufacture: 2020 Condition: Very good, used Run-on hours: 6,000 h Load hours: 1,730 h Maintenance in 2,589 h Technical Specifications Pressure 11 bar Effective free air delivery 1.67 m³/min Ledpfx Aexnnd Djfasrk Rated motor power 11 kW Motor protection class IP 55 Power supply 400 V / 3 Ph / 50 Hz Dimensions (W x D x H) 750 x 1,335 x 1,880 mm Weight 580 kg Air receiver 350 l Compressed air connection G 1 Sound pressure level 66 dB(A) Refrigeration dryer Power consumption 0.49 kW Pressure dew point 3 °C Pressure drop 0.06 bar Refrigerant R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment: EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m power cable with 32A plug

Condition: good (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 12,000 kg, feed length Y-axis: 300 mm, feed length Z-axis: 1,080 mm, table diameter: 1,200 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 3 m/min, input current: 195 A, workpiece diameter (max.): 1,600 mm, milling spindle length: 450 mm, table bore: 400 mm, spindle speed (min.): 250 rpm, overall weight: 51,000 kg, power: 115 kW (156.36 HP), Equipment: documentation/manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Lodpfjwqm A Tox Afasrk Controller Liebherr LH90 V4, Bosch Rexroth drives Extensive accessories such as BHG, cooling unit for lubrication and coolant, extractor, cutter arbors, various software packages/limit value extensions, and complete documentation. We can also assist with setup and commissioning up to production, depending on effort!

Condition: excellent (used), Year of construction: 2018, laser wavelength: 1,030 nm, power: 5 kW (6.80 HP), Manufacturer: Trumpf Model: TruDisk 5001(6C) Year of manufacture: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm Central sensor interface: yes OEM laser: yes Output power 1: 100% Output power 2: 100% Output power 4: 100% Beam quality output 1: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 2: ≥ 4mm x mrad, ≥ 100µm NA01 Beam quality output 4: ≥ 4mm x mrad, ≥ 100µm NA01 Active laser power control: yes Live power display: yes Panel computer: yes Processing optics cooling: yes Water connection set: yes Ethernet in user area: multiple Number of occupied fiber links (LLK): 4 Number of intelligent optics: 4 Number of active couplings: 4 Number of couplings: 4 LLK coding (ILN): yes LLK type: LLK-D TLS number: 20-10-03-A105 Additional interfaces: no Parallel interface: yes Interface output 1: Profinet Interface output 2: Profinet Interface output 3: Profinet OPC UA interface: yes Ledsr Izwmopfx Afaerk VisionLine preparation: yes Number of VisionLine Basic: 2 Number of VisionLine Detect: 0 Number of VisionLine Interface: 1 Number of VisionLine Project: 0 I-PFO preparation: no PFO Smart Teach App: no TLS machine: no TruControl Module Cutassist: no CE/UKCA declaration: Installation declaration with annex

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Lsdephl Ecjpfx Afasrk Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head Lodpfelgvkijx Afasrk IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Lodpfspugwisx Afaork Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm Lsdpfx Aen E N Ndjfajrk feeding length: up to 270 mm output: up to 350/min

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Lodpfjhlp Efox Afaork

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm Lrodpfx Ajcdrmmofaok - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 215 mm, total width: 130 mm, total length: 360 mm, overall weight: 7 kg, warranty duration: 12 months, type of cooling: air, product height (max.): 10 mm, welding current at 60% duty cycle: 150 A, welding current at 100% duty cycle: 130 A, welding current (min.): 5 A, welding current (max.): 200 A, - Tested used device in very good condition directly from the manufacturer - - Several devices available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (including gas management, high-frequency ignition and electrode welding function). All-in technology for power grid, generator and battery - "3 steps and weld" operating concept - Simple one-button operation - Continuous current setting - Ampere-accurate digital display - With graphical user guidance in the OLED graphic display - Maximum customization thanks to detailed welding sequence control - Job memory for 10 welding tasks Current new price (02/2025): 2,277.00 € plus VAT Scope of delivery: System including removable power cable, carrying strap, gas hose and operating manual THE MicorTIG SERIES. THE POWER PACKAGES FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional welders: The welding machines in the MicorTIG series from Lorch are the ultimate TIG machines for assembly use, but also for the workshop - suitable for steel and stainless steel. Whether for production or repair, with or without a power socket on site: The MicorTIG series improves the work results of TIG welders around the world - and makes their everyday life easier. Quite literally: At just 6.8 kg, you can easily take your Lorch MicorTIG welding machine with you anywhere - including accessories in the assembly case. Small but powerful: With the patented MicorBoost technology, the welding machines in this series get 200 amps from any normal power socket. INTUITIVE OPERATION. Thanks to the ampere-accurate digital display and clearly structured user interface, intuitive and at the same time very precise operation is possible. Also optionally available: an operating concept using a graphic display. NON-CONTACT HF IGNITION. TIG ignition is contactless with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, there are no inclusions in the seam and the electrode is protected. PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse function up to 5 kHz is particularly suitable for processing thin welding sheets. It enables outstanding melt pool control and perfect results even with difficult welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save the parameters of up to 10 welding tasks and call them up quickly when required. Recurring tasks are completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. Lrsdevxid Rspfx Afask Lorch's MicorTIG welding machines are suitable for every electrode type and offer a convenient preselection for CEL and standard electrodes. Even special electrodes are no problem. During welding, the arc force control takes effect and ensures arc stability and perfect material transfer. The anti-stick system prevents the electrode from sticking or burning out. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE SOCKET. The patented MicorBoost technology provides enormous voltage reserves and regulates the TIG arc in an extraordinarily stable, controllable and precise manner – even with fluctuating mains voltage. This allows you to weld with up to 200 amps from a regular socket.