Used Pot Devin for sale (552)

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System For a wide range of requirements Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium. The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes. For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits Dosing accuracy independent of temperature, pressure, or viscosity Constant mixing ratio at all times due to parallel emptying of dosing cylinders Wide range of applications (in terms of materials and use cases) Key functions Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio Sensor-based monitoring of inlet and outlet valves as well as cylinder filling Material temperature control via mixing tube heating (optional) Camera-based dispensing needle monitoring (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and casting resin viscosity Precisely reproducible and highly accurate results Maximum process reliability Applications Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top) DOS P016 Max. volume/shot (2K at 1:1 ratio) 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dispensing speed [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatability [°C]: up to 80 Outlets: 1K: 1–4, 6, 8 2K: 1–4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on operation "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Gksdpfx Ajzc Nplek Usb You can find additional dosing units—new and used—in our shop! International shipping costs available upon request!

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, throat depth: 500 mm, Manufacturer: Fase Full: 116 kVA Version: 500mm The machine used to be part of a system, its settings and performance were controlled via a central control unit, which is currently missing, Gkedpfx Aouhn Tkok Uob This version is required to operate the machine!

Condition: used, Year of construction: 1992, pressure 100 t table length 1800 mm table width 1550 mm table travel 2000 mm dayligth 1800 mm Godpoyt R H Tefx Ak Uokb total power requirement 19,5 KVA weight of the machine ca. 22 t

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Gkedpfxezrupze Ak Usb Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type: 3238 with double-acting cylinder and manual control valve Long stroke: 75 mm – Pre-stroke: 25 mm – Working stroke with stroke adjustment: 0-25 mm Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 350 mm with universal joint suspension and suspension bracket 10 m connection cable Godeztmb Eepfx Ak Uokb included: Synchronous welding control RS 12 with main switch and 32 A CEE plug.

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Electrode force: 235 daN Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch Godpeztyn Sofx Ak Uokb

Condition: excellent (used), functionality: fully functional, Steel Potato Grinder Consists of: - Main structure: overall dimensions: 860 x 860 x 2600 mm Gkedpjyku Dqjfx Ak Usb - Grinding unit: drum diameter: Ø 530 mm The infeed conveyor belt is not included in the set The steel potato grinder is a compact industrial device designed for reducing raw material size in processing applications. Its tall construction (2600 mm) combined with a 530 mm drum diameter allows for efficient product handling while maintaining a small installation footprint. The machine features a robust steel build, ensuring stable operation and resistance to heavy-duty use in food processing environments.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: S17678, input voltage: 400 V, type of input current: three-phase, power: 22 kW (29.91 HP), input current: 45 A, Excellent condition machine, lightly used, undamaged, year 2019. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Gkedpex Dq D Ssfx Ak Ueb

Condition: good (used), Arm design: 270 mm Power: 125 kVA Gksdepy Dy Ejpfx Ak Ujb

Condition: ready for operation (used), Now available! Complete dumpling/knödel production line Gkedpfx Asx H Sapsk Ueb In very good condition. Production line capacity: 1,200 kg per hour For further specifications of this line, please see attachments. The line can be inspected in Stavenhagen, Germany. The installation is still fully operational and connected to power, making live demonstrations possible. The line is complete and starts with the storage of potato flakes. These are subsequently mixed in the correct ratio. The system can also process other raw materials, such as bread dough or alternative ingredients – for which an additional big bag station is available. After mixing, the product is weighed and further blended before being conveyed to the Rheon forming machines. The Rheon machines form the product; if desired, an internal filling can also be applied. The product is then transferred to the breading drum and subsequently to the spiral freezer, where the exterior is hardened to guarantee good packability. After freezing, the product is weighed by a multihead weigher and packed in doypack pouches. It then passes through the pasteurization tunnel, ensuring a longer shelf life. The packaging is subsequently dried with an air blower. Finally, a weight and metal detection check is carried out before the products are automatically packed into cartons via a repacking machine. The boxes are then automatically palletized, after which the products are ready for transport. Multiple photos available (please contact us for further information).

Condition: good (used), Year of construction: 1999, machine/vehicle number: 99 C 70090, Offer 19013 Gkodpfx Aov Du Dask Ueb Technical data: - Nominal power at 50% duty cycle 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Welding values for sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm distance 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water quantity approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Suspension bracket with gimbal ring

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM Gedpfx Aerx S Ipek Uekb - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: excellent (used), HOMAG EDGETEQ S-380 edge banding machine Top-mounted material pressure beam, liquids Pre-milling cutters, Glue application, Preheating unit with glue pot Pneumatic preliminary trimming unit, pressure rollers liquids Final trimming saws, R1-R2 top-bottom milling unit 2x R1-R2 corner rounding unit Multi R1-R2 profile trimming unit Gkedezmgh Sopfx Ak Ueb Flat trimming unit, Liquids Polishing unit, Grooving unit Nesting The machine features NC control; all settings and operations are performed from the control panel. Maximum part height: 60mm, Maximum reel edge band thickness: 3mm, Feed rate: 8-18m/min The machine is in very good condition and is almost as good as new. Operating hours: 535h

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,900 h, travel distance X-axis: 870 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 930 mm, total height: 1,178 mm, total width: 3,585 mm, table load: 800 kg, overall weight: 16,100 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 22,000 W, tool weight: 10,000 g, product length (max.): 4,957 mm, number of axes: 4, This 4-axis Kitamura Mycenter HX500iG was manufactured in 2015. It features a maximum workpiece diameter of 800 mm and a maximum workpiece height of 1,100 mm. The machine includes a robust pallet size of 500 x 500 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the Kitamura Mycenter HX500iG horizontal machining centre we have for sale. Contact us for further details. • CNC controller: Arumatik-Mi • Pallet size: 500 x 500 mm (19.7" x 19.7") • Number of pallets: 2 • Pallet change time: 8.8 s • Max. workpiece diameter: Ø 800 mm (Ø 31.5") • Max. workpiece height: 1,100 mm (43.3") • B-axis travel: 0–360° (full 4th axis, DD motor driven) • B-axis rapid feed: 43,200 deg/min (120 rpm) • Table surface to spindle center: 50–850 mm (2.0"–33.5") • Table center to spindle nose: 140–1,070 mm (5.5"–42.1") • Drive method: Gear drive, 4-step • Max. spindle torque: 266.4 N·m (196.5 ft-lbs) • Spindle motor: 22 kW (30 HP AC / 15 min) / 15 kW (20 HP AC / continuous) • Rapid feedrate (X/Y/Z): 60 m/min (2,362 ipm) • Cutting feedrate (X/Y/Z): 60 m/min (2,362 ipm) • Tool storage capacity: 50 tools (fixed pot, random bidirectional) • Tool holder style: CT(BT) 40 / HSK-A63 optional • Max. tool diameter: Ø 95 mm (3.7") / Ø 170 mm (6.7") with adjacent pot empty • Max. tool length: 600 mm (23.6") Gsdpfx Aozl S Nxek Ujkb • Tool-to-tool change time: 1.3 s • Chip-to-chip change time: 3.8 s minimum • Linear scales: Fine-resolution optical feedback on X/Y/Z • Rotary scale: Direct high-resolution (0.02 sec) rotary encoder feedback on B-axis • Thermal displacement control: Intelligent advanced control system • Coolant tank volume: 700 liters • Power requirement: 55 kVA, 200V AC, 3-phase • Air requirement: 0.5 MPa, 410 L/min (90 psi, 14 cfm) Additional equipment • Through-spindle coolant: High-pressure internal coolant system at 20 bar (RCM 20 bar) • Chip conveyor: Scraping / double-decker type • Work area tool sensor: Renishaw tool presence transmitter/laser inside working area Technical Specification Taper Size BT 40

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees Gkedpohtm E Nofx Ak Ueb table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Liquids Top and bottom milling unit, R1 – R2 Profiling cylinder Corner rounding unit Flat cylinder, Polishing unit Pneumatic 3-point adjustment Godpfx Ajza Uq Aek Uokb Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Max. part thickness: 50mm Used machine, very good condition Mileage: 62,000 meters

Condition: like new (used), Single Flatbed Machine - Model Number CEL-FB3500-1900-1R To suit Ø1.8m Tanks Gkjdpfx Aen E S Idjk Uob Ring diameter – estimated 2300mm ID Single Flatbed Machine - Model Number CEL-FB3600-1050-1R To suit the following tools Clarifier, Blower pot and Riser tool Or Welding Blocks, Green Lid and Blower box Ring diameters estimated at 1 x 1400mm ID

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Gkedpoyfgwlsfx Ak Ujb

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) Gkodpfszug Sgox Ak Usb • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment • Anti-adhesive and polishing liquids

Condition: used, Cup Surface Grinding Machine / Cylinder Head Grinding Machine Max. grinding area: 835 x 200 mm Electromagnetic clamping plate: 500 x 200 mm Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Machine weight: 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Gksdpfowlbz Tex Ak Ueb DE - 44143 Dortmund - Wambel / Germany

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Gkodpfx Akoy N Duke Ujb Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Godpfxewlbxle Ak Ujkb Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Edge Banding Machine Edge Bander EBM Model: KDP 112 SLK Year of manufacture: 2000 Edgebanding via hot-melt glue pot Plastic edges and veneers 0.4 to 1 mm PVC edges and thick veneers 1.0 - 3.0 mm Solid wood edges up to 5 mm Flush cutting with end trimming unit Flush milling top and bottom Dimensions approx. 2.86 x 1.32 x 1.3 m Weight approx. 550 kg Total power requirement approx. 10 kW Condition as shown in the pictures and as described in the article description. Collection by the buyer is possible. All dimensions are approximate. All details provided to the best of our knowledge but without guarantee. Subject to prior sale. The items can be collected by the buyer or shipped at the buyer’s expense. Shipping costs listed are for reference only and may vary depending on distance. Gksdsy Ahubepfx Ak Ueb The offered item is subject to differential taxation. The stated sale price is a gross amount. An invoice with VAT shown separately will not be issued. You will receive an invoice according to §25 UStG (German VAT law). Warranty conditions: Due to wear and tear, used parts are generally sold as defective – for parts only – and only to business customers. By placing a bid, the buyer accepts this as the basis of the purchase agreement. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur as defined by §14 BGB, any warranty is excluded. For new items, the warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Used edge banding machine SCM - Model: Olimpic K360 T-ER1 - Very good condition. - Immediately available - Video on request - Year of manufacture: 2016 Godpfx Aksyrr Nas Uekb - High-end configuration (2 extra glue pots)

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide Gsdezcpixopfx Ak Uskb - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons