Used Fit for sale (2,383)

Condition: good (used), Year of construction: 1989, machine/vehicle number: 8906756, functionality: fully functional, actuation type: pneumatic, overall weight: 84 kg, GRASS BBM /ST with adapter for BLUM fittings Row drilling unit – hinge plate drilling – drilling for base plates – drilling for press-in dowels – adapter for pressing in the hinge plates and base plates. Ijdpfjzvn N Nox Abnjtk

Year of construction: 2009, operating hours: 89,479 h, condition: good (used), functionality: fully functional, Grinding robot for machining forged or cast water fittings, operating air pressure 5.5-6 bar, Iedpfx Abszvn Tzjnjtk operating voltage 400 V-50 Hz, rated current 13 A, rated power 8 kW, ongoing maintenance until 2026, extensive range of accessories.

Condition: good (used), Year of construction: 1998, operating hours: 97,487 h, functionality: fully functional, Polishing robots used for water fittings, control system by C & B Electronic, ongoing maintenance until 2026, extensive accessories. Itedpfjzvnfkex Abnsk

Condition: excellent (used), Year of construction: 2009, operating hours: 2,200 h, functionality: fully functional, total width: 2,550 mm, total length: 8,650 mm, pressure: 150 bar, operating pressure: 150 bar, type of input current: DC, fuel: diesel, overall weight: 27,000 kg, empty load weight: 14,555 kg, temperature: 60 °C, fuel tank capacity: 700 l, type of cooling: water, Equipment: crane, rotational speed infinitely variable, type plate available, An authorized SUBARU dealer has a special vehicle for sale that was used for cleaning tunnels and high facades in Sweden. It was also used for high-pressure cleaning of highways and roads. It is equipped with a water cannon that can be controlled from the cab. Additionally, a power generator is installed on the vehicle body. It has a tow hitch that could, for example, be used to pull a sweeper or brushes for road cleaning, or similar equipment for maintaining road cleanliness. The Mercedes was purchased from a municipal company and was regularly serviced. We can manufacture dedicated cleaning nozzles for, for example, cleaning roads or walls. The body was manufactured by "MEC TEC AS" and features highly efficient pumps for water cleaning, up to 300 liters per minute! It also includes a power generator to power the body. It has a 11,500-liter water tank and a 500-liter tank for chemicals. The engine compartment is located at the rear of the body and contains: - Diesel engine - Large, high-pressure water pump connected to the diesel engine via a clutch - Hydraulic pump connected to the diesel engine at the front, which drives: - Small high-pressure pump for water used for cleaning vehicles and technical installations - In addition, there is a lance for remote cleaning - Chemical pump located in a separate cabinet at the rear on the right side - 3 diaphragm pumps located on the right side of the vehicle. - 2 hydraulic pumps connected to the distributor near the diesel engine, which drive: - Hydraulic radiator fan - Arm located on top of the vehicle - Water heating for the small high-pressure pump A tower is built above the cab and attached to an auxiliary frame. This tower forms the basis for the cleaning arm; we offer the possibility of manufacturing a dedicated nozzle for cleaning larger surfaces. The diesel tank for the body has a capacity of 700 liters. - Generator for generating power for external devices - Hydraulic oil tank - Hydraulic oil cooler Mass and dimensions: GVWR: 27,000 kg Unladen weight: 14,555 kg Payload: 12,445 kg Itodjzvnipjpfx Abnek GVWR of the combination: 71,000 kg On the drawbar (o.1): 44,000 kg External dimensions: Length: 865 cm Width: 255 cm Wheelbase: 3900/1350 mm Emission standard: EURO 6 Equipment: Body with water tank Cannon/Arm for "shooting" water Arm adjustment in the cab "ALLISON" automatic transmission Power generator Seating: 4 seats Reversing camera On-board computer Air conditioning Tachograph 3rd steerable and liftable axle Rear axle lock Air suspension front and rear Tow hitch/coupling Additional exterior lighting Orange lights Factory radio ABS Immobilizer Electric side window Electric mirrors Heated side mirrors Inspection report: The vehicle is technically and mechanically sound and arrived at our company from Sweden without any problems. It has been regularly serviced. The water cleaning system and pumps have been checked and are functioning properly. It is currently fitted with winter tires, size: 315/80R22.5, with approximately 70% tread remaining. The vehicle is, of course, accident-free and has a genuine mileage, verified by the authorized service center and the Swedish authorities. The stated price is net and applies to export and to companies. A significant discount may be possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrinking device for the precise and rapid shrinking of tools in shrink-fit chucks. This device is ideally suited for use in CNC machining, toolmaking, mold making, and modern machining operations. Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make this device an efficient solution for daily tool preparation. Features: Manufacturer: Komet Type: ISG3100 Induction shrinking technology Fast heating of shrink-fit chucks Simple and safe operation Isdpfx Aezu Ikkobnetk Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-piece production Used, fully functional. Shows signs of wear consistent with its age.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,072 h, functionality: fully functional, working width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is in very good overall condition, both visually and technically. No visible damage, corrosion, or significant wear and tear can be detected. Maintenance was carried out internally using SAP PM (electrical maintenance every 6 months, mechanical maintenance every 3 months). TECHNICAL DETAILS Material: Continuous corrugated cardboard Working width max.: 2,500 mm Minimum length: 200 mm Cardboard thickness: 2.57 mm Tool width: approx. 45 mm Longitudinal cutting accuracy: 0.2 mm Length tolerance: 1.5 mm/m Packaging size: 600 × 600 × 300 mm Iodpfszu Akrjx Abnstk Performance: approx. 55 s/packaging unit Software and control (with 21" multi-touch panel and integrated control cabinet) PC: Beckhoff C6930 (Intel Core i5, 16 GB RAM, SSD) with Windows 10 IoT Enterprise Software: Beckhoff TwinCAT 3 Packaging design database: approx. 250 designs Production list control Dynamic tool management Multi-level waste optimization Bidirectional processing Remaining length monitoring Production data recording in CSV format Plain text error messages MACHINE DETAILS Operating hours: 13,072 h (in single-shift operation) Machine construction: Welded construction Multi-function tools for longitudinal processing: 6 Transverse processing tools: 1 Rubberized rollers: 2 Overpressure: segment-controlled Weight (according to nameplate): approx. 2,110 kg EQUIPMENT Automatic cardboard changer Automatic selection of the optimal cardboard web width Two stations for cardboard webs Box designer programming software for customer-side workstations Creasing, scoring, perforating, and cutting according to the single-point principle Material-friendly creasing technology to prevent the cardboard from flaking Perforation using an oscillating knife with adjustable perforation level Cutting using a toothed knife on a rubberized roller Clean, fiber-free cut edges Servo-motor adjustable tools Packaging designs Bottom/lid construction Bottom with corner locks for upright fixing of rims Lid according to FEFCO 0331 Suitable for the production of precisely fitting individual packaging for aluminum and forged wheels

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Isdpfx Abozhx D Uonotk Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, New machine, purchased in 2020. Ideal for: Furniture manufacturing Kitchen manufacturing Carpenters/joiners Series drilling for Blum fittings and hinges Technical specifications: 3 x 400 V 1.1 kW Professional industrial version The machine comes from a workshop liquidation. Scope of delivery: Ijdpfx Abeznkufenstk Machine Stops/accessories, base frame as shown in the pictures Operating manual Inspection/test run possible by arrangement.

Condition: used, Year of construction: 1994, machine/vehicle number: M51N1000.50, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 220 V, input frequency: 50 Hz, Blum Minidrill drilling machine with measuring rail and base cabinet. Itodpfszkp Tlsx Abnjk Base cabinet dimensions: L x W x H in cm: 210 x 60 x 86 cm.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) Isdpfxoztazfe Abnotk TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: used, Schafberger+Sprödhuber Type BS electro-pneumatic pot-hinge drilling machine or fitting drilling machine for drilling pot hinges or fittings with mechanical centring. Itedpfx Abjzrytxensk Technical data: - Technical specifications: On request

Condition: used, MAW BEV electro-pneumatic pot-head drilling machine for drilling pot-head screws or fittings Technical data: Itsdjzrytfspfx Abnok - Work surface: 300 x 37 cm - Motor: 1.6 kW - Weight: 180 kg

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 This machine can be used to drill corner joints, transom windows and olive joints in loose or compressed timber frames The scanning is carried out at the rebate, the 8 stops for corner bearings and transom windows, as well as for the rebate timber and transom, are automatically engaged once the timber is positioned. The machine features an automatic programme sequence with electric control for the drilling motors, activated by a safety foot pedal Pneumatic connection R 1/4 5–6 bar Itsdezk Nzpspfx Abnek Extraction velocity 25 m/sec. Extraction nozzle diameter: 120 mm Electrical connection: 0.75 kW Dimensions: 2950 x 650 x 1100 mm Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale: Weeke Optimat BHX 500 vertical CNC machining center, manufactured in 2011, designed for drilling, milling, and grooving sheet materials in the furniture industry. The machine enables fast and precise machining of parts and is suitable for both serial and custom furniture production. Technical specifications: Model: Weeke Optimat BHX 500 Year of manufacture: 2011 Machine type: 3-axis continuous CNC machining center CNC control system: WoodWOP (Homag / Weeke) Maximum workpiece length: approx. 3050 mm Maximum workpiece width: approx. 1200 mm Maximum workpiece thickness: 80 mm Minimum workpiece length: approx. 200 mm Minimum workpiece width: approx. 70 mm Equipment: Drilling head with multiple vertical and horizontal spindles 96 drilling spindles (48 from above, 48 from below) 36 vertical spindles 12 horizontal spindles Grooving saw Milling cutter (from above and below) 125 mm saw, rotatable by 90° Automatic clamping and workpiece transport system Possible applications: Drilling for dowels and fittings Milling and grooving Machining of chipboard, MDF, HDF, plywood, and solid wood Advantages: The ability to machine two pieces simultaneously significantly increases productivity Fast retooling and workpiece changes High precision in drilling and milling Ideal for the production of cabinet furniture, kitchens, wardrobes, and interior elements Iedpfx Aezvftlobnstk Condition: The machine is regularly serviced and fully functional. Test run possible during inspection. Availability: end of October

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, Two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Compressed air connection 6 bar Fully automatic pneumatic control with foot valve Additional switch for "chip removal" program T-shaped drill head with 7+2 drill spindles, 32 mm pitch Drill shank diameter 10 mm 90° pivoting with locking mechanism Isdpev Npw Eefx Abnotk Chassis

Condition: used, Year of construction: 1996, with 1 drilling head used in top condition cleaned functionally tested Manufacturer: Hettich Type: Blue Max Mini Year of manufacture: 1996 Machine No.: 06316 CE type approval Number of spindles: 4 Drilling feed: pneumatic Table model, length x width: 800x400mm Swinging stops: 4 Drill chuck: shank 10 mm Dust extraction connection: 50mm Space requirement approx. L x W x H mm: 800x600x650 Location: 97447 Gerolzhofen, free loading, unpacked Iedjzkvyxopfx Abnstk Handover in the current condition as inspected, without warranty and guarantee

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Itjdpfxozvc R Uj Abnsk Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic for automatic cycle KW6.6 / 9 HP (S6) electrospindle teleservice system cable remote control for easier positioning and adjustment Robot: automatic loading and unloading system for glass sheets Loading and unloading trolley with lockable wheels Mechanical/electronic device on the robot head for centering the workpiece on the working surface Pneumatically retractable workpiece stop Various double vacuum suction cups Various tool sets incl. reverse osmosis system type IDROTECNICA "IDRO RO 130 ST" max. 130 l/h VERTICAL 500 plastic storage tank 500 l Stand for storage tank SE15002 conductivity test kit incl. FILTRAGLASS ECO-BOX CNC grinding coolant water treatment unit incl. stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter system approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection on-site 7-8 bar (480 Nl/min) Dismantling/removal to be carried out by the buyer Isdpsw H R A Njfx Abnstk

Condition: excellent (used), CATALOG NUMBER 7567 TECHNICAL SPECIFICATIONS - Automatic strip feeding - 2 pneumatic clamps - Aggregate angle adjustment - Pneumatic spindle movement - Simultaneous machining of 2 sections - Groove depth up to 25mm - Support rails - Oscillating drill movement adjustment - Feed stroke adjustment - Automatic stop Iedpeztzd Ijfx Abnotk - Inclination from 90 degrees (vertical) to 0 degrees (horizontal) - Main motor 1.1kW - Oscillation motor 0.75kW - Working pressure 6-8 bar - Dimensions (L/W/H) 4020x1150x1400mm - Weight approx. 480kg ADVANTAGES – For window production – Oscillation – Pneumatic clamps – Not painted – Italian made – Used machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may change with major fluctuations)

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm Isdpfxezupzqj Abnotk BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: good (used), Year of construction: 1993, Würth Fitting Drilling Machine Prebomat II Year of manufacture 1993 Complete in standard configuration with: Fully automatic pneumatic control in accordance with GS test, Iodpfx Aeymynysbnstk Oil brake and return stroke limiter for line boring, Electrical skip operation Motor 0.75 KW, 400 V, 1 stop ruler 900 mm 2 extension rulers from 1.25 m to 2.5 m 4 swivel stops Worktable 1000 x 430 mm 4-spindle drilling head with pressure lever Pitch 25/5.5/32 mm 7-spindle drilling head for line boring, pitch 32 mm with integrated indexing pins

Condition: used, Portas BEV electro-pneumatic pot-and-tongue drilling machine for drilling pot-and-tongue joints or fittings Technical data: Isdpfxjzrytrs Abnjtk - Table top: approx. 300 x 37 cm - Weight: 180 kg

Condition: defective spare-parts repository (used), Year of construction: 1993, operating hours: 40,042 h, functionality: limited functionality, machine/vehicle number: 1009, turning diameter over cross slide: 345 mm, turning length: 1,000 mm, turning diameter: 550 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 285 mm, travel distance Z-axis: 1,070 mm, spindle motor power: 34 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 3,150 rpm, total height: 2,180 mm, total length: 5,755 mm, total width: 2,350 mm, type of input current: AC, overall weight: 7,500 kg, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Manufacturer: TRAUB Type: TND 550 Year of manufacture: 1993 Operating hours: approx. 40,000 hours Condition: defective / not operational For sale is a TRAUB TND 550, manufactured in 1993. The machine was in use at our facility until recently. Currently, the control system does not start, meaning the machine is not operational at this time. We have not investigated the cause of this issue further. Therefore, no statement can be made as to whether the cause lies in the control system itself, the power supply, or another machine component. The following defects were already known prior to the current failure: Gear shifting not functioning. The machine was permanently in gear 2, with a speed range up to approximately 3,200 rpm. Driven tools not functioning. Tailstock operation is performed via an added toggle switch. The turret moves or shifts only in slow motion. The ball screw of the X-axis causes running noises. The running noises of the ball screw of the X-axis have been present since we purchased the machine in 2021. Despite these running noises, the machine was able to reliably produce H7 fits until the current failure. The causes of the aforementioned defects, as well as the current failure, have not been fully investigated. The machine is therefore explicitly sold as defective, non-operational, and in need of repair, and is suitable, for example, for repair, as a source of spare parts, or for reconstruction. Inspection is possible by appointment. Sale in the existing "as is" condition. All information is provided to the best of our knowledge, but without warranty. Sale with exclusion of any warranty for the mentioned and possible further, currently unknown, defects. Ijdjzd Udiopfx Abnotk

Condition: good (used), Year of construction: 2002, functionality: fully functional, Stationary drilling machine for furniture components, for drilling rows of holes and hardware, with a drilling head for rows of holes and a drilling head for hardware, specifically for HETTICH hardware. - Drilling unit adjustable in depth This allows, for example, 2 rows of holes to be drilled in parallel without having to move the workpiece. - Drilling motor 1.1 kW, 2,820 rpm Iedpfxjzbh Hts Abnjtk - Pneumatic feed via foot valve, stroke 90 mm - Stop system with folding stops - Pneumatic workpiece clamping - Quick-change system for drilling heads Existing drilling heads: - BKF-15/32 drilling head for rows of holes with 15 spindles, pitch 32 mm - 3-spindle drilling head for Hettich hardware Connection values: 400 V, 50 Hz, 3-phase

Year of construction: 2019, condition: ready for operation (used), A fully automatic rubberized 90° fitted sheet production line (fitted sheet) Automatex Canada is available. Orientation: W/L and L/L, material feed: unwinder, sewing heads: 4, sewing head distribution left/right: 2/2, end product: fitted sheet corners/box formation, corner angle: 90°. Including tension control, edge and web guiding, longitudinal hemming station with elastic band insertion, length measurement, cross cutting and conveying units. Documentation available. An on-site inspection is possible. Ijdpeyhqcqofx Abnetk