Used Portion for sale (684)

Condition: used, Year of construction: 2023, load capacity: 12,000 kg, lifting height: 6,400 mm, fork length: 2,400 mm, total length: 6,600 mm, - Lastschwerpunkt: 600mm - Bedienung: Sitz - Achslast: mit Hublast, vorn/hinten (Mast senkrecht) 27236/3084 - Achslast: ohne Hublast, vorn/hinten (Mast senkrecht) 9620/8700 - Spurweite: mitte Reifen, vorne: 1850/1800 mm - Spurweite: mitte Reifen, hinten 1440 mm - Neigung Hubgerüst: 6/10 Grad - Sitzhöhe: 1700 mm - Kupplungshöhe: 820 mm - Arbeitsgangbreite bei Palette 1000 x 1200 mm Hodpfx Abexr Riqs Dsw - Arbeitsgangbreite bei Palette 800 x 1200 mm - Wenderadius: 4000 mm - Kleinster Drehpunktabstand: 1770 mm - Fahrgeschwindigkeit mit/ohne Last: 15/19 km/h - Hubgeschwindigkeit mit/ohne Last: 0,25/0,33 m/s - Senkgeschwindigkeit mit/ohne Last: 0,5/0,4 m/s - Zugkraft mit/ohne Last (60 Minuten) 7000/8800 mm - Max. Zugkraft mit/ohne Last (5 Minuten) 30500/32000mm - Steigfähigkeit mit/ohne Hublast (30 Minuten) 5/9 % - max. Steigfähigkeit mit/ohne Hublast (5 Minuten) 10/17,5 % - Beschleunigungszeit: mit/ohne Hublast (Strecke 10m): 6,5/5 s - Betriebsbremse: elektrisch - Batteriespannung: 96 V - Art der Fahrsteuerung: inverter - Arbeitsdruck: für Anbaugeräte: 250 bar - Fortschrittliches Mulitfunktionsdisplay (AMD) - Luxuriöser Sitz mitautomatischer Gewichtseinstellung - Automatische Feststellbremse - Obenliegende Neigezylinder - Proportionale Geschwindigkeitsreduzierung bei Kurvenfahrt - Seitlicher Batteriewechsel - Rückfahrkamera

Condition: excellent (used), Year of construction: 2016, HAITIAN MARS II MA10000/6800 Universal ServoDrive (2016) only 17.000 hours in automatic cycle! Main Technical Parameters: Clamping force: 10,000 kN Opening stroke: 1220 mm Minimum mould height: 500 mm Maximum mould height: 1160 mm Daylight between platens: 2380 mm Distance between tie bars: 1160 x 1160 mm Clamping platen size: 1650 x 1700 mm Screw diameter: 90 mm L/D ratio: 24.4 mm/mm Shot volume: 2721 ccm Shot weight (PE): 1986 g Injection rate: 544 g/s Max injection pressure: 2280 bar Machine dimensions: 12.5 x 2.49 x 2.75 m Machine weight: 50.000 kg Equipment and Features: 423 – Proportional valve for injection (Rexroth) S01 – 8x hydraulic core pullers (4x fixed platen, 4x moving platen) with servo motor 432 – 8x core relief 662E – 16x integrated hot runners Hodpswtgltsfx Ab Dew 623 – Acoustic alarm 237C – Safety locking force sensor 430C – 8x pneumatic cascade control Barrel and screw designed for processing 30% glass-filled materials 419A – Parallel movement: opening/ejector or opening/core 667 – 6x freely programmable inputs/outputs Flow meter with 6 tubes + hoses + cable trays + valves + filters + nozzles + labor, all per Lamky specification (Stäubli quick couplings) Total sockets: 4x230V/16A, 2x400V/16A, 4x400V/32A Centering ring diameter (fixed and moving side): 250 mm 8x pressure gauges for core puller circuits 409A – 8x pneumatic valves (8 mm, 3/2), 4x fixed, 4x moving side E65 – Interface for temperature controller (4 zones) 236 – Automatic ejector bar retraction (operator side)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Schröder Hamax 800 year of construction 2006. HAMAX 800 whole muscle stuffer is automatic filling of fresh (for example, as restructured meat) or cured meat parts/pieces of meat (for example, as raw and cooked cured meat) in artificial casings. The fundamental principle of the machine is based on a hydraulically driven piston that presses the meat into the casings. The HAMAX 800 whole muscle stuffer forms the technical requirement for increasing the efficiency in the production of sliced goods which are calibrated in length and thickness. In combination with an automated double clipping-machine, swift and efficient processing can be reached, which was previously very time-consuming for these products. The combination of the whole muscle stuffer and the integrated cutting system is the innovative factor. This affects the exact portioning of pork loins with tendon. Hsdpoxrnkfofx Ab Dsw 2x filling pipes including 95 mm & 125 mm. Capacity up to 1200 kg / hour.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3,796 h, functionality: fully functional, machine/vehicle number: S2909835010226, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 21,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Powerful HSK-A 63 Motorizied spindle with 21.000 rpm - pallet change system for 2 pallets - High-pressure cutting fluid system (40 bar) _____ Basic machine G350 AB generation 2 Travel path of the X-axis 600.0 mm Travel path of the Y'-axis 855.0 mm Travel path of the Z-axis 750.0 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³ Machine control SIEMENS SINUMERIK ONE Hodpfjxtknpsx Ab Dsw Swivel axis calibration GSC Advanced Energy efficiency package EEP1 Tilting table unit (A'-axis) Rotary table with pallet clamping system GROB (B'-axis, PW) Motorized spindle HSK-A 63, 21,000 rpm, 35/47 Nm, 29/39 kW, oil-air lubrication GROB spindle diagnostics GSD Double disk-type tool magazine HSK-A 63 with 105 (45+60) tool pockets Tool cleaning device Tool coding, system BIS-M (BALLUFF) Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools Pallet change system for 2 400 x 400 mm pallets Setup station door, automatic, for manual and automatic loading and unloading 2x Pallet 400 x 400 mm, T-slots, with pallet changer hook Pallet equipped with 6 fluid connections High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Flushing unit (Z-axis) Part clamping system in the work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1)  Cooling unit for hydraulic proportional valves Part clamping system in the setup station of the pallet changer KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP6: Compressed air, seating check system with SOPA air gap sensor make FESTO (P6.1) Work area camera for machine control panel GROB⁴Pilot (ROTOCLEAR) Radio touch probe RMP400 (RENISHAW) 12-month warranty

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. Hedpfx Aswr Drneb Dew twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: used, Year of construction: 2025, DESCRIPTION / DESCRIPCIÓN / DESCRIPTIONHMK 145LC SR-5, 2.3 m stick, 4.6 m boom / 0.70 m3 ? 1200 mm bucket / double-acting hydraulic line, joystick proportional control / hydraulic line support for rotation / hydraulic line for quick coupler / Smartlink GPS+GPRS / air suspension and seat heatingSingle-/double-acting hydraulic lineAuxiliary hydraulic line for rotationHydraulic line for quick couplerSetting the flow rate (liters per minute) on the displaySetting the pressure (bar) on the displayProportional control on the joystickSafety valves for boom and armOverload warning switchRod protectionTravel alarmPneumatic seatSeat heatingRain/sun visorFOPS/sun visorFOPS2 cab protection systemComplete windshield protection cage (stone/rock)2-part boom 4,8 mFront dozer bladeReversing cameraRight side camerasWithout bucket: D.R., 0.6 m3 ? 985 mm ==> 0.75 m3 ? 1210 mm2.6 m arm price differenceBoom cyl. pipe protectionRubber track pads ROAD LINER-500 mmLED working lightAutomatic lubrication system Groeneveld Twin Heavy DutyWarranty 1 year or 2,000 hours, whichever comes first -Certificate 31Upper chassis swing movement. Alarm1 32Leica Ready 2D/3D pre-installation10 33Front dozer blade ready (without blade)1 34500 mm base plates + 4 additional holes for bolting on1INCL. Hodpfxour D Ums Ab Dsw 35600-mm-Bodenplatten1 36700-mm-Bodenplatten1 37Rutbber caterpillar plate for bolting on ? 500 mm ? from Hidromek supplier ex works with bolted-on metal rail with 4 additional holes (not in the chain)1 38Rubber track plate for bolting on ? 500 mm ? from SOLIS. Is screwed to the chain, on the metal plate in the middle1 39Additional hydraulic line ? Leakage line1 40Dual high flow ? Double-acting hydraulic line with high flow.1 41Smartlink1 42Single/double acting hydraulic line1 43Auxiliary hydraulic line for rotary movement1 44Hydraulic line for quick coupler1 45Setting the pressure (bar) on the display1 46Proportional control on the joystick1 (*) NB: The prices in the option is valid only when the option is delivery with the machine. Spare parts price can be different..... ..... Subject to prior sale and errors excepted Images show original consumption data

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 20,800 mm, total length: 7,890 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump Hjdexd Hpdjpfx Ab Dsw - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: used, Year of construction: 2021, operating hours: 94 h, Honda / GX390 389cc 8.7 kW Hinowa crawler chassis PT 9/HP 1100, Ferrari loading crane F350R-A4, manual extension max. 7,010 mm/405 kg, Hedjxfnizopfx Ab Dsw Support variant B, extension with proportional control valve DPX050, Scanreco radio remote control, overload system RLC, Hose reel for 2 auxiliary functions, two-shell grab R41/155 with teeth, hydraulic rotator R102,

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Hsdpfexqywhox Ab Dsw Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: new, Year of construction: 2025, New delivery 2 to 9 weeks Road approval possible Price 165,500¤ + VAT or export DESCRIPTION / DESCRIPCIÓN / DESCRIPTION HMK 150W-H4, 2.3 m stick, 4.6 m boom / 0.6 m3 - 985 mm bucket Fuel pump Hodpfxovvfwno Ab Dsw Double-acting hydraulic line Dual High Flow - Double-acting hydraulic line with high flow. Auxiliary hydraulic line for rotation Hydraulic line for quick coupler Proportional control on joystick Flow adjustment (litres per minute) on display Pressure adjustment (bar) on display Safety valves for boom and stick Overload warning switch Rod protection Beacon FOPS2 cabin protection system Complete windshield protection cage (stone/rock) Pneumatic seat Seat heating Travel alarm Rear view camera Right side cameras 2-piece boom 4.8 m Tires 10.00-20 without bucket 2.6 m arm price difference 2 stitches front Dozer blade rear Towing hook Trailer Bucket support Sun visor LED headlights Speed 35 km/h Automatic lubrication system Groeneveld Twin Heavy Duty Not road legal Warranty 1 year or 2,000 hours, whichever comes first. CE certificate

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. Hjdpjxqyvdjfx Ab Djw It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Arburg 570S 2200-1300 / Production line with the Arburg Multilift robot Year of manufacture: 11.2010 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Injection pressure: 2000 bar Hjdsxqyvkopfx Ab Dow Dosing volume: 664 cc Clamping unit: Clamping force: 220 t Bar spacing: 570x570 mm Clamping plate size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touch screen Additional equipment: Production line with the Arburg Multilift robot Machine in very good technical condition Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 4 Control with hot runners x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The machine was regularly serviced in Germany Robot Arburg Multilift Year of manufacture: 11.2010 5-axis robot: 3 axes are driven by servo motors (electric); axis B (revolution), axis C - pneumatic Travel paths in axes: X-400, Y-800, Z-1800 Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 10090 kg Length/width/height: 5.89x1.90x2.228 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Hjdpfxexqyuys Ab Dow Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Arburg 470C 1500-400 with the Wittmann W711 robot Year of construction: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Robot Wittmann W711 Year of construction: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 9.7 kW Total output: 28.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Hodpfx Aoxqytcob Djw Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of manufacture: 2005 injection unit: screw diameter: 25 mm injection weight: 49 g Injection pressure: 2500 bar Metering volume: 54 ccm Clamping unit : clamping force: 150 t tie bar distance: 470x470 mm size of clamping platens: 685x685 mm Ejector: hydraulic Hjdpjxqyrxefx Ab Dsw clamping unit: hydraulic Control system: SELOGICA Additional equipment: 2K machine Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer: 30, 35 mm Dimensions: Weight: 5700 kg Drive: Pumps/motor: 30 kW Heating power: 2 x 9,4 kW Total power: 48,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Hjdpfx Aboxqyrfo Dow Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit: clamping force: 130 t Hedpfxexqyq Ie Ab Dsw tie bar distance: 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of the pressure quality from the brand Sensor Kistler - measurement of the mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 470S 1100-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping Unit: Clamping force: 110 t Tie bar distance: 470x470 mm Platen size: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control System: SELOGICA – Touchscreen Additional Equipment: Euromap 67 Robot interface 2 x air valve 1 x hydraulic core pull Control system with 8 hot runner zones Hardened injection unit – Bimetallic Proportional valve on injection unit – precise injection Conveyor belt integrated with machine control Built-in sorting flap Screw diameter can be changed Wittmann W711 robot Year of manufacture: 2008 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; C axis – pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel Robot with adapter Robot purchase available at extra cost Dimensions: Weight: 5200 kg Length/Width/Height: 4.56x1.52x2.13 m All machines offered will be started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Hjdpfx Aoxqyqneb Djw Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 470S 1000-290 / Production line with the Wittmann W821 robot / Operating hours: approx. 35,000 h in automatic mode Year of construction: 11.2012 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Injection pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 470x470 mm Size of the clamping platens: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Very good technical condition Operating hours: 35,000 h in automatic mode Euromap 67 Robot interface Air valve x 2 Hydraulic, needle core pull, controlled by a proportional valve x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Priamus cavity pressure sensor Hodpfxoxqyqbe Ab Dsw Robot Wittmann W821 Year of construction: 2012 5-axis robot: 4 axes are driven by servomotors (electric); axis B (rotation), axis C - pneumatic Travel in axes: X-550, Y-1200, Z-2000 Vacuum Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 4850 kg Length/width/height: 4.34x1.52x2.12 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2018, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of construction: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Distance between tie bars: 0x0 mm Hsdpfsxqym Nox Ab Dow Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air valve x 6 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm In both injection units there is an option to replace the screw diameter with a smaller or larger one Robot Sepro Multi Inject 20 Year of construction: 2018 4-axis robot: 4 axes are driven by servomotors (electric): X, Y, Z, B (rotation) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Hedpfx Absxqym Ae Djw Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Hedpfoxqymvsx Ab Dew Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2015, Engel Victory 200H/60W/180 combi / production line with robot Engel Viper 20 Year of manufacture: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Injection pressure: 2392 bar Metering volume: 61 ccm Clamping unit: Clamping force: 180 t tie bar distance: 0x0 mm size of clamping platens: 1020x980 mm ejector: hydraulic clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot. tie-bar-less machine, hybrid: energy-saving, high-speed and very silent Operating hours: approx. 20.000 h in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced injection units - bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Kistler sensor - mold pressure control Parallel movements The machine has an additional servo motor to drive the mold Outputs / inputs for peripheral devices Robot Engel Viper 20 Year of manufacture: 2015 High-speed robot, 5-axes: X, Y, Z, A, C axes are driven by servo motors (electric) Robot is integrated with the machine and has the additional control panel The safety package for robots Robot with adapter and protective housing Dimensions: Weight: 13200 kg Length/width/height: 5.86x1.98x2.51 m Hjdpoxqympefx Ab Djw All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Hsdpfxjxqymio Ab Dow Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm ejector: hydraulic clamping unit: hydraulic Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Hedpfx Ajxqylleb Dsw Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request