Used Portal for sale (1,233)

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Gtodpjuv Hkgsfx Afkjt Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Donaldson Torit DCE filter system 161225ä

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, Hydraulic 500 T Gantry Straightening Press with tool clamping device and parallel support for the bending blade a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 44 mm/sec c) Table size 2000 x 850 mm d) Open height 1500 mm e) Overall size approx. LWH 1500 x 3000 x 4300 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table with grid design Gjdpfx Afswgakvjkstt i) Remote control j) Pressure adjustment from 80 T to 500 T via rotary dial k) Table moves hydraulically outward 700 mm for loading l) Cylinder moves left and right via racks m) Machine body powder-coated or double-coated n) T-slots according to customer requirements o) Cylinder induction-hardened p) Assembly, commissioning, and instruction are charged separately. Press type: GANTRY PRESS Thermally neutral 80 – 120 °C Number of operating sides: 3 Forces Max. press force: 5,000 kN Max. free tear-off force: 800 kN Pressure build-up time: Closed tool, steel on steel: Max. 3 seconds Dimensions Max. opening width: 1,500 mm Stroke and min. opening: 1,300 mm/200 mm Table height above floor: approx. 850 mm Height above floor (overhead height): approx. 4,300 mm Hall height: min. 5,000 mm Deflection Determined at max. closing force with 70% occupancy: < = 1.2 mm/m Weight Total weight of the press without operating materials and table top: approx. 25 t Speeds Quick closing with 17 mm sec. Pressing speed at F max.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 47,870 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, table load: 10,000 kg, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Table load capacity: 10,000 kg Gtodpfx Aex Agh Rjfkot Spindle taper: ISO 50 Standard spindle speed: 6,000 rpm Spindle motor (continuous / 30 min): approx. 22/26 kW Tool changer capacity: 32 tools Max. tool diameter: Ø 127 mm / Ø 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Rapid traverse X-axis: up to 20,000 mm/min Rapid traverse Y-axis: 15,000 mm/min Rapid traverse Z-axis: 15,000 mm/min Cutting feed: approx. 1 – 10,000 mm/min MACHINE DETAILS Program runtime hours: 47,870 h EQUIPMENT Extension of equipment to automatic head changer with angular milling head

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor Gedpfxsr Etulj Afkott - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Gtjdpfxoxvx U Ae Afket Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3.6002, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, table load: 12,000 kg, TECHNICAL DETAILS X axis: 4,000 mm Y axis: 3,000 mm Z axis: 1,500 mm Passage height: 1,550 mm Passage width: 2,500 mm Table width: 2,000 mm Table length: 3,000 mm max. table load: 12,000 kg Tool holder: HSK-A100 max. tool weight: 30 kg max. tool diameter: 250 mm max. tool length: 500 mm Drilling spindle speed range: 5–6,000 rpm max. permissible torque at milling spindle: 800 Nm MACHINE DETAILS Total power requirement: 30 kW Space requirement approx.: 9.5 x 6.7 x 6.2 m Gjdpfx Afexvrb Nokett EQUIPMENT Demmeler pallet changer

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Model: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Gtodow El Udopfx Afket Worktable: 1.5 x 6 m 2 oxy-fuel torches 101225ä

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature Gtedpfx Afexrb Nbeket - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 10,000 rpm, Zimmermann FZ38 – 5-axis gantry Year of manufacture: 2005 – fully refurbished and upgraded in 2022 by Zimmermann for €600,000, full documentation available X 3000 Gtedpfxsxziame Afkjt Y 2500 Z 1250 A +/- 100 degrees C +/- 360 degrees 2 spindles: 50 kW – 24,000 rpm and 44 kW – 10,000 rpm HSK 100 Linear axes certification 5/m Siemens control U… Immediately available This machine was completely overhauled and upgraded by Zimmermann in 2022. At that time, approximately €600,000 was invested, with all invoices available. The machine is in very good, near-new condition.

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. Gtedpfer D U I Djx Afket - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Spindle Performance: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Gtjdpfx Aoq Ixc Tsfket Only inquiries from Germany will be answered.

Condition: excellent (used), Year of construction: 2008, type of input current: three-phase, input voltage: 400 V, Excellent condition machine, cleaning technology, disinfection portal for entry and exit points, three-phase electrical connection, lightly used. We speak English, German, and former Yugoslav languages. Contact also possible via WhatsApp. Gtodpsxy Nxtsfx Afkst

Condition: good (used), Year of construction: 2006, CNC Gantry Flame Cutting Machine Manufacturer: Messer Model: Easytherm 4600 Year: 2006 Control: Global Control Working area: 3 x 9 m No table included!! A table can be offered upon request! Track length: 12 m with HEB beam 1 oxy-fuel torch ALFA 1 plasma torch with Kjellberg 160i plus power source Including marking unit Torit filter system In-house technicians available for installation, commissioning, and training! All spare parts in stock. Gtedpfxoivz A Rj Afkjt 161225ä

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° Gtsdpjxlip Aofx Afkot • A-axis: +95° / -110°

Condition: excellent (used), Year of construction: 2018, operating hours: 19,394 h, functionality: fully functional, machine/vehicle number: 2522027, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,250 mm, total length: 5,900 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 6,139 mm, total height: 5,980 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 50 m/min, distance between stands: 3,225 mm, table load: 4,000 kg, workpiece weight (max.): 16,000 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, distance table center to spindle nose: 1,500 mm, tool weight: 8,000 g, Equipment: rotational speed infinitely variable, Control: Heidenhain TNC640 Number of controlled axes: 5; simultaneous Commissioned: 2019 Spindle run time (h): 12,629 Tool holder: HSK 100 Tool changer: 30 positions Linear motor Gsdpexx Svxefx Afkstt Internal coolant supply (IKZ): 65 bar incl. chip conveyor incl. special operator panel

Condition: new, Year of construction: 2025, table area: 2000 x 1000daylight: 700 (Abstand zwiwschen Tisch & Kolbenspitze)table height: 800Cylinder: 240motor: 7,5performance of pump: 22Forward speed: 9Return speed: 13tank capacity: 70 Capacity: 150 tons – 340 Bar / 172 tons – 380 Bar Motor Control: via Hand Lever Cylinder: Manually movable from the side Bridge: Movable via Hand Wheel Table Dimensions: 2000 x 1000 mm Gtsdpfx Aehu H Dpsfkot Installation Height: 700 mm (distance between table & piston tip) Piston Stroke: 400 mm Table Height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 Lt./min – ASC Speed: Forward: 9 mm/sec – Return: 13 mm/sec Tank Volume: 70 Lt Pressure Regulator Valve Pressure Gauge Display Pressure Hold Valve Weight: 2300 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. Gtodpfx Aoxxvp Nsfkjt – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 24,000 rpm, table load: 15,000 kg, Submitting a bid obliges the buyer to collect the machine by the deadline of 27.11.2025! The machine can still be inspected under power until week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The CNC control was upgraded in 2014! TECHNICAL DETAILS Gedpjxr U Drofx Afkstt Working Areas X-axis: 6,000 mm Y-axis: 2,700 mm Z-axis: 1,250 mm Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool holder: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminium Linear Axis Drives Feed rate X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Connection Data Power requirement: 28 kW Main fuse: 63 A Dimensions & Weight Required floor space: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche Gedpfogqkc Nsx Afkott without tracks without table without filter

Condition: new, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 150 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 2,200 W, number of spindles: 1, Equipment: rotational speed infinitely variable, CNC4ALL Professional 1200 × 600 💪 Compact Precision CNC Milling Machine – powerful, versatile & in stock! Features (Premium Configuration): 💨 2.2 kW Spindle Motor (water-cooled) – powerful & quiet during continuous operation ⚙️ 9 Nm Stepper Motors (micro-stepping) – precise movements & smooth running 💧 Minimum Quantity Lubrication – extends tool life & reduces maintenance 🌪️ Extraction Hood – clean workspace & clear view while milling 🔄 Rotary Axis D 80 mm × 900 mm – ideal for cylindrical parts, engravings & 3D machining ❄️ Cooling System for Spindle – consistent temperature for long service life 🧲 Vacuum Pump (side channel blower) – secure clamping of small or large workpieces 💻 Control Software Included – Plug-and-Play: connect, start, mill! 📐 Technical Data: Godpoxwdkrjfx Afkett * Working area: 1200 × 600 × 150 mm * Accuracy: Positioning ± 0.02 mm | Repeatability ± 0.03 mm * Travel speed: up to 8,000 mm/min * Guide System: Hiwin linear guides, size 20 mm * Drive: TBI ball screws * Machine table: cast iron T-slot/vacuum table combination * Frame: welded steel base, CNC-machined for flatness & stability 🚀 Your Benefits at a Glance: ✅ In stock – ready for immediate delivery & turnkey upon arrival! ✅ Compact design with industrial precision – perfect for workshops & small batch production ✅ High performance for wood, plastic, aluminum & composite materials ✅ Clean, efficient production thanks to extraction hood & minimum quantity lubrication ✅ Flexible thanks to rotary axis & vacuum table – for both flat and round workpieces ✅ User-friendly control – quick setup & easy operation 🪵 Ideal for: Joineries • Model builders • Sign making • Prototyping • Plastics & aluminum processing 📦 Order now! The CNC4ALL Professional 1200 × 600 offers precision, performance, and reliability in a compact format – in stock & ready to use immediately. 👉 Contact us now for your personalized quote or to arrange a demonstration in our showroom.

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 250 mm, For sale is a used, but like-new SK0805 gantry milling machine. The machine has been regularly serviced at all times and is in excellent visual and technical condition. It is fully functional, tested, and ready for immediate operation. Godpfjxwau Hex Afkott Our service commitment: For us, quality, expertise, and customer satisfaction are top priorities. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you at any time, even after the purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: excellent (used), axle configuration: 3 axles, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,200 mm, total length: 9,940 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 5,130 mm, color: other, Year of construction: 2006, Axle configuration Tyre size: 385/65 R 22.5 Suspension: air suspension Rear axle 1: Tyre profile left: 80%; Tyre profile right: 80% Rear axle 2: Lift axle; Tyre profile left: 80%; Tyre profile right: 80% Rear axle 3: Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 5.160 kg Carrying capacity: 21.840 kg GVW: 27.000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: WS-RB-50 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages Gtodpfxju A Anbo Afket - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: new, Year of construction: 2025, Ref. -No.: 10463 Manufacturer: IGREK Type: FR 3500 XL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 6500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Godpfoxmd Szsx Afkstt Turning Speeds: 12500 RPM Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Table-Size (Lxw): 2290 - 6490 x 3580mm mm Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Machine length: 11500 mm Machine width: 7400 mm Machine Height: 6600 mm Weight: 120 t Further information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a CNC-controlled 5-axis portal milling machine of the latest generation (year of manufacture 2024). It was specially developed for the demanding machining of large workpieces and impresses with its versatility and precision. With a modern control system from Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for manufacturing in a wide range of industries. Key features: Large machining areas: With travel distances of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine is ideal for machining large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle reaches speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling work. High stability: The machine weight of 120 tons and the table load of up to 4,000 kg ensure low-vibration machining even with heavy workpieces. Flexible tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and optimal process times. Rapid feed rate: High productivity is achieved with 30 m/min in the X, Y and Z directions. Technical data at a glance: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in the machining of large parts. It is available immediately and offers comprehensive warranties and services directly from the manufacturer, internationally and across the board. Use the latest technology for your production – contact us for further details!

Condition: used, Year of construction: 2018, functionality: fully functional, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ±110° C-axis: ±360° Gedpfoxm Tv Aex Afkstt Control unit: Heidenhain TNC 640 with HR 520 handwheel Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with transverse T-slots at 250 mm intervals Max load: 1,000 kg evenly distributed across the entire surface 2-axis milling head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Tool holder: HSK 63F Tool release: pneumatic Blow air: external Linear axis drives Feed rate X and Y axes: up to 60 m/min Feed rate Z axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Colour Enclosure, gantry, control cabinet: light grey Z-carriage and milling head: blue Additional equipment - 15-position tool changer - Oriented milling spindle (e.g. for thread cutting) - Direct path measuring system on all 5 axes - Double-sided enclosure - Heidenhain TT140 (optional, at extra cost) - Heidenhain TS260 (optional, at extra cost) - 3D machine model (optional, at extra cost) Machine condition Fully functional, immediately available, still under power until November 2025

Condition: new, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, overall weight: 1,600 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, coolant supply: 3 bar, number of spindles: 1, Equipment: rotational speed infinitely variable, 🚀 CNC4ALL Industry 3000 × 1500 CNC Milling Machine/Gantry Milling Machine High-Performance CNC Milling Machine – In stock & ready to use! Premium Features: 💪 5.5 kW spindle motor (water-cooled) – powerful performance for precise machining of wood, plastics, aluminium & composites ⚙️ Servo motors on all axes – high dynamic response, exact repeat accuracy, and smooth running Gedpfxexwc Ipe Afkjtt 🧲 Vacuum pump (side channel blower) – optimal workpiece clamping on the vacuum table, even for large-scale materials 🌪️ Extraction hood – keeps the work area clean 💧 Minimum quantity lubrication – extends tool life, reduces coolant consumption, and ensures clean results 🔧 Technical Highlights * Working area: 3000 × 1500 × 200 mm * Repeat accuracy: ± 0.03 mm * Rapid traverse speed: up to 25,000 mm/min * Heavy-duty welded steel frame for maximum stability * HIWIN linear guides and rack-and-pinion/ballscrew drives for precise movements * Control system with user-friendly CNC software (included) ✅ Your Benefits * Available for immediate delivery – no waiting time! * Delivered fully operational – connect, power up, and start milling * Perfect for carpenters, sign makers, and industrial operations * Efficient, quiet, and low-maintenance – ready for professional continuous operation 📞 Get in touch now & secure your quote! The CNC4ALL Industry 3000 × 1500 combines power, precision, and industrial-grade reliability – and is ready for immediate use in your business. 👉 Contact us now for an individual quotation or a live demo in our showroom