Used Door for sale (9,964)

Condition: used, Year of construction: 2003, Fully functional ready to use. Please check out our other listing as well Iiedswt R Dmopfx Abnof

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Isdpszul Utsfx Abneif Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Iedpfxjzul T Ns Abneif Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: good (used), mileage: 215,000 km, Year of construction: 2015, Mercedes V-CLASS V220, double sliding doors, AVANTGARDE, 215,000 km, 2015, BARGAIN! Valid MOT until 2-27, leather upholstery, ambient lighting, navigation, camera, air conditioning, tow bar, two keys. PLEASE NOTE: THE PRICE IS A BARGAIN, THE VEHICLE IS PRIVATELY OWNED, NO VAT. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without any guarantees (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without any obligation. Please call beforehand, as we are not always present. Van de Wert Trading B.V. Iiedpfezt R Dqsx Abnsf Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of construction: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning spread Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLC outlet Isdpozu Sqhjfx Abnoif Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (including automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and single image transmission to the network (view of the first 2.5 m) Additional 10 m extension of the LLC between laser and machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine with platform design (without steel structure) Connection to STOPA large storage system (SKL or UL) Safety devices for storage system connection including 2nd light barrier circuit Storage system interface (without storage carriage) LiftMaster Compact (STOPA version) TRUMPF Laser: Solid-state laser TruDisk 8001 with one LLC outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single cutting head strategy Protective glass against lens contamination Condition check of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shut-off Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via Internet Data transmission: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust collection system Machine enclosure, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding any warranties or guarantees. Subject to prior sale.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union Iiodpfeygx Hnsx Abnef - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Barberan laminating machine for door frames Isdpfx Abjy Aibcenjif

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Iisdpfxjzul Tvj Abnef Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,317 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, controller model: Fanuc i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 520 mm Travel range, Y-axis: 360 mm Travel range, Z-axis: 350 mm Spindle speed: 12,000 rpm Distance spindle to base plate: min. 150 mm / max. 500 mm Table area: 650 × 375 mm Table load: 2 × 200 kg Tool weight: max. 2.8 kg Tool magazine: 14 positions MACHINE DETAILS Control system: Fanuc i Dimensions & Weight Dimensions (L x W x H): 3,230 × 1,620 × 2,507 mm Iedezul R Iepfx Abnoif Machine weight: approx. 5,200 kg Operating hours: 14,317 h EQUIPMENT Rigid tapping – thread drilling without compensation chuck Spindle overspeed and power display Telescopic guards on the X, Y, and Z axes Rapid traverse in the X, Y, and Z axes Door safety switch 3-color indicator light Work area lighting Coolant supply from a 200-liter tank via adjustable coolant nozzles at the spindle nose Internal cooling Machine cover, closed on top / Top cover Oil skimmer Pneumatic clamping system A, 1 pair per pallet Automatic work area door with safety strip Coolant system with delivery pressure: 4.5 bar

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control Ijdpfx Abezvdc Seneif • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Condition: excellent (used), functionality: fully functional, Machine with full equipment Iodpfsztl Htsx Abnsif - Maximum door width 1,250 mm (with spacer) - Pneumatic lifting device - Pneumatic clamping - Pneumatic chain feed - Pneumatic drilling (pilot hole, pressure hole) Used machine, well-maintained and fully functional Inspection and test run possible upon request.

Year of construction: 2006, condition: ready for operation (used), An inspection is possible. Iisdpfx Absqvnmbsnof

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: BIESSE ROVER 20 CNC machining center – 3 axes, working area 2893 × 950 mm. The machine is used, has undergone a comprehensive technical inspection and extensive service work, and is fully functional and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its extensive machining capabilities and the modernization of the electrical system and CNC control. The center features an ISO 30 electrospindle, a 10 + 6 spindle drilling head, and a saw unit, enabling milling, drilling, grooving, pocketing, and contour machining. Specifications: • Manufacturer: BIESSE • Model: ROVER 20 • Year of manufacture: 1998 • Number of axes: 3 • Working area X × Y: 2893 × 950 mm • 6 adjustable, pneumatically locking work beams Isdpfxezucbqs Abneif • 12 vacuum cups • Pneumatic front and side stops • Main electrospindle: 3.6 kW, ISO 30 • Saw unit • Drilling head: 10 vertical + 6 horizontal spindles • New X/Y/Z axis servo drives: 3 × 1.0 kW • Vacuum pump: 3.0 kW • CNC controller: ESP32 • System: grblHAL / OpenBuilds CONTROL • Computer connection: USB • Dust extraction port: Ø200 mm • Total power: 9.6 kW • Overall dimensions: approx. 380 × 155 × 205 cm Service work performed: • Replacement of electrospindle bearings • Vacuum pump inspection and impeller replacement • Inspection of the pneumatic system and leak removal • Installation of 3 new X/Y/Z axis servo drives • New electrical system and CNC control installation Application: • Production of furniture, fronts, doors, and interior design elements • Machining of MDF, plywood, and furniture boards • Milling and contour machining • Vertical and horizontal drilling • Grooving and pocketing Additional information: • The machine does not require a dedicated computer – control is possible via a computer through USB • Currently operating on ESP32 with grblHAL and OpenBuilds CONTROL • It is possible to use a different CNC system, e.g., PikoCNC or UCCNC • Upon request, we can configure another system – the estimated cost of work is approximately PLN 4,000 + license, controller, and any components • Manufacturer's documentation in Italian • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price quoted in the auction applies to export/WDT sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We organize transport using the MDD fleet or through external carriers • We assist in obtaining leasing or a leasing loan • The delivery cost depends on the destination and the method of machine transport.

Condition: used, Year of construction: 2010, max. workpiece length 4500,6000 mm profile spindle 4 Stück main drive 30 kW Weinig Conturex C226 Machining Center ----- For sale on behalf of a client; includes software (Klaes) and tooling (Oertli) for IV68/IV78/IV92 and Wood/Alu 68–92 systems. Machine still is electrically connected. Technical specifications and window cross-sections available upon request! ----- Price of the above-mentioned machine available upon request! ----- Dismantling and reinstallation available upon request! Iiodpfx Abszqvnijnof (Technical specifications provided by the manufacturer – subject to change/no liability assumed!) All prices are net, plus statutory VAT.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount Ijdpoztl Scsfx Abneif - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops) Iedpfx Abszvb E Denjif

Condition: ready for operation (used), Year of construction: 2022, operating hours: 731 h, pressing force: 51 t, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, number of axes: 7, This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details. • Drive: Dynamic electromechanical Torque Drive • Capacity and dimensions: • Free upright clearance: 1,305 mm • Usable installation height: 385 mm • Throat depth: 250 mm • Working height: 1,150 mm • Machine frame: Stable welded frame • Axes and backgauge: • CNC axes: 7 (Y, X1, X2, R1, R2, Z1, Z2) • Backgauge: 6-axis independent system (X1/X2/R1/R2/Z1/Z2), both units move independently • Backgauge features: Carbon-fiber fingers, hardened reference surfaces, helical rack Z-drive, flexible positioning • Travels / working range: • Y stroke: 215 mm • X travel: 240 mm (max backgauge range 500 mm) • R travel: 153 mm • Speeds: • Y rapid/return: 220 mm/s • Y working: 25 mm/s • X: 1,500 mm/s • R: 750 mm/s • Z: 2,200 mm/s • Positioning accuracy: • Y: 0.002 mm • X: 0.02 mm • Z: 0.02 mm • Crowning: • CNC-controlled crowning, automatic compensation via drive • Crowning drive integrated in the table • Suited for multi-station bending • Y-axis / press beam: • Inductive Y measuring system • Dynamic spring-back compensation with automatic force-based correction • Hardened adjustable guide strips • Control system: • TRUMPF Touchpoint TruBend, 21.5" TFT Full HD (1920×1080) • Intel Core i5 2.7 GHz dual-core, Windows Embedded Standard 7 • Realistic 3D visualization, TRUMPF technology database • User management with Standard/Expert/Administrator levels • 10 user access cards included • Data interfaces: • USB, RJ45, Ethernet 10/100 Mbit/s • Central Link, OPC UA • Internet teleservice / remote diagnostics • Tool clamping and setup: • Automatic TRUMPF upper and lower tool clamping (self-centering, hardened) • Fast segment change • LED Tool Indicator integrated in upper clamping (shows setup positions/next bend station) • Safety: • Automatic BendGuard (part of Productivity Package Plus) • Optoelectronic safety system with automatic tool-height setting • Allows max permissible Y speed with foot pedal • Automatic adjustment, movable out of working area for side processing • Electronically monitored side safety doors • Electrically operated lift-up rear doors • Emergency stop • Transport securing devices • CE marking • Ergonomic package: • Front support table • Front and rear LED work-area lighting • Support for seated/standing operation • Document shelf • Drawer for measuring instruments Additional equipment • Measuring equipment: • Digital angle gauge Iedpfx Abezu S Uasnjif • Digital caliper • 90-degree edge square • Wireless 2D code reader with Bluetooth connection Technical Specification Bending Length 1530 mm

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: ET1PA23085067157, This is a Rational Ultravent Plus hood, type UV PLUS 61/101/E, manufactured in 2023. It is suitable for the following Index series: Index H and I, as well as for DUO units or individual appliances. This hood not only captures escaping vapors but also eliminates odors and smoke. No external exhaust duct is required. An LED lamp automatically indicates when the filter needs to be replaced. This version features stainless steel baffle filters and a pre-filter mat located behind them. This protects the activated carbon filter, which is the core component of the hood, from becoming contaminated too quickly and ensures optimal functionality. This Plus condensation hood can be ideally used in the front area, in enclosed spaces, or during show cooking. Retrofitting and installation on Rational SCC 61/101 WE units can be carried out with minimal effort. The hood has been tested in our in-house workshop, and new activated carbon filters have been installed. Fully functional with a 6-month warranty. Immediately available. Recommended retail price: approx. €9,669.94 gross. Our special price: €4,998 gross. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational customer service center throughout Germany. Our used equipment service for you: * 6-month warranty on all electrical parts, limited to the replacement of defective parts without installation or removal costs. * High-quality branded equipment at fair prices. * Professional overhaul/inspection and expert cleaning. * Tested and fully functional – or your money back. * Flexible shipping or self-collection options. * Competent advice – before and after purchase. * Provision of operating instructions, connection diagrams & spare parts. * Inspection according to DGUV V3. Iisdszu Sdhepfx Abnof Technical data: * W x D x H: approx. 854 x 1226 x 628 mm * Minimum door opening dimensions for transport W x H: 845x850mm * Serial number: ET1PA23085067157 * Year of manufacture: 2023 * Power connection: V: 200 - 240 / Hz: 50-60 * Weight: approx. 95 kg Condition: Used, tested, fully functional. Shipping: * Delivery or self-collection by arrangement. * Worldwide shipping on request. * Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday, 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: ET1PA24025070612, This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, manufactured in 2024. It is suitable for the following Index model series: Index H and I, and can also be used for DUO units or individual units. This hood not only captures escaping vapors but also eliminates odors and smoke. You do not need an exhaust duct leading to the outside. An LED lamp automatically indicates when you need to replace the filter. This version features stainless steel baffle filters and a pre-filter mat located behind them. This protects the activated carbon filter (newly installed), which is the core component of the hood, from becoming contaminated too quickly and ensures optimal functionality. This Plus condensation hood can be used optimally in the front area, in enclosed spaces, or during show cooking. Retrofitting and installation on Rational SCC WE 61/101 can be carried out easily. The hood has been inspected in our in-house workshop and is fully functional, with a 6-month warranty. The stated price is the gross price, including 19% VAT. Service: We will gladly connect you with a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to an extensive range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional – or your money back Flexible shipping or self-collection options Competent advice – before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: Iodpfx Ajzu Sc Dsbnoif W x D x H: approx. 854 x 1226 x 628 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Serial number: ET1PA24025070612 Year of manufacture: 2024 Power connection: V: 200 - 240 / Hz: 50-60 Weight: approx. 95 kg Condition: Used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), overall weight: 3,200 kg, type of input current: three-phase, input voltage: 400 V, For Sale: Costa Levigatrici KA CC 1350 Industrial Wide Belt Sander (2004) High-performance, heavy-duty wide belt calibrating and sanding machine manufactured by Costa Levigatrici S.p.A. (Italy). Known for its exceptional build quality, reliability, and accuracy in high-capacity woodworking and panel production environments. Key Specifications Manufacturer: Costa Levigatrici S.p.A. (Italy) Model: KA CC 1350 Serial Number: A40506 DR 1 Year of Manufacture: 2004 Working Width: 1,350 mm Aggregates / Heads: 2 Sanding Belts ("CC" Configuration) Total Power: 57 kW Amperage / Voltage: 109 A / 400 V (50 Hz) Total Machine Weight: approx. 3,200 kg Certification: CE Compliant Iedpfx Aezu Sbmjbnoif General Overview & Features Capacity: 1,350 mm working width allows for handling large panels, solid wood components, doors, and composite boards. Dual Head Configuration ("CC"): Designed for efficient combined calibrating and finish sanding operations in a single pass. Robust Construction: Industrial-grade heavy-steel frame (3.2 tonnes) ensures vibration-free operation and precise thickness tolerances. Applications: Ideal for solid wood processing, panel sizing, veneer finishing, and lacquer sanding lines. Condition & Inspection Status: Used / Good condition Location: Available upon request Inspection: On-site inspection can be arranged prior to purchase.

Year of construction: 2011, condition: used, functionality: fully functional, This is a combination oven/steamer, model CMP 101, from the premium manufacturer Rational, in an electric version. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The unit is offered with a 6-month warranty on all electrical parts. The base shown in the picture is not included in the offer, but can be purchased as an option. The list price is: €9,380 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational equipment type? Ask us, we have access to an extensive range of used and new equipment. We will be happy to advise you on all equipment types. This unit is the optimal choice if you are looking for a classic combination oven/steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042 mm Minimum door opening dimensions for transport WxH: 845x1050mm Power connection: 400 V / kW: 18.6 / 50-60 Hz Capacity: 10x1/1GN Weight: approx. 132 kg Serial number: E11MH11122284737 Year of manufacture: 2011 Condition: used, underwent comprehensive inspection, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the optimal serving temperature in the ideal climate Automatic separation of fat for clean cooking chamber air Manual cleaning program Iijdpfxszu Rulj Abnjf 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement using a probe Cool-down function High-performance fresh steam generator (automatic rinsing and emptying) Handheld spray nozzle with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2014, A high-performance, fully operational industrial roller coating line by CEFLA. All machines are from the 2014 and operated continuously until the end of 2024 (discontinued only due to the end of production), well-maintained, and ready for immediate integration into production. This setup is perfect for furniture factories, flooring manufacturers, and door producers seeking top-tier automation and flawless surface finishing Iijdpezu Rufofx Abnsf Line Composition (15 Units Total): Fully operational: Coating & Filling Machines: 4 units - Smartcoater MF-EVO Roller Coaters 1 unit - CEFLA SP1-EVO Roller Filler/Spackling Machine UV Curing Ovens: 2 units - CEFLA UV-R M1 Curing Ovens 2 units - CEFLA UV-R M2 Curing Ovens Transporters: 2 units – CEFLA TB900 Transfer Conveyors Dimensions: 900 x 1580 x Adjustable Height 860–940. Non-operational - for spare parts/repairs: 4 units – CEFLA Smartcoater MF-EVO Roller Coaters

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Iisdpfx Abegiwl Dsnof Available immediately

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: Iiedpfx Asx A Hdxobnsf X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: used, Year of construction: 1980, Second-hand machine Year of manufacture: 1980 Iisdszk N Aaspfx Abnof Features and technical specifications: - Lock case milling unit - Handle hole drill - Face milling cutter - 1.5 kW motor - 2,800 rpm Availability: at short notice Location: 63934 Röllbach