Used Polymer for sale (101)

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: RX7_800314, total height: 1,905 mm, total length: 2,010 mm, total width: 2,508 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 19 kW (25.83 HP), 5-axis CNC tool grinding machine – completely overhauled (X, Y, Z axes, CNC). High-performance production machine with polymer concrete bed (ANCAcrete), 19kW, 10,000 rpm spindle, dual wheel changer for up to eight grinding wheels. !Offer available only in Europe, Africa, and the Middle East! Kodpfx Aow Uf Sgeh Noll

Condition: used, Year of construction: 2004, Screen changer EREMA SW8/134 RTF Continuous partial area backwash filter with 4 carrier pistons (8 sieves) for heavily contaminated polymers Minimal pressure differences when backwashing or changing sieves The melt filter system meets the highest demands for fine filtration and is characterized by robustness, a high degree of automation and maximum availability, plus improved homogenization of the melt Main components: 1x continuous 4-piston backwash filter 1x control monitoring unit 1x operating unit for filter change 1x hydraulic unit System features: - Sieve diameter Ø 134mm - Active sieve area 1128cm² - fully automatic rinsing processes without interrupting production - Technical documents - Year of manufacture 2004 Subject to prior sale Klodpfx Ahoualalo Nsl Please only send inquiries by email Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize the shipping. This is not part of the offer price.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889 Kedpfxjuy N S Us Ah Nell

Condition: new, Features > 5-axis simultaneous CNC machine > Basic structure made of polymer concrete > Wet/dry machining > Workpiece zero-point clamping system > Servo drives with absolute encoder > Integrated control with touchscreen Options > Machine base frame Kedpfx Ahshqhkie Nsll > Various Zero-point clamping devices: T-slotted plate, four-jaw chuck, precision vice and blank holder > Automatic placement system > 3D measuring probe > Why buy? Simply finance. Talk to us! The iMG 1010 is a compact solution for processing workpieces up to 100x100x100 mm. With its basic structure made of polymer concrete, it enables precise processing of numerous materials such as titanium, steel, CoCr, ceramics, sapphire, zirconium or aluminum. Particularly noteworthy is the arrangement of the Y-axis, which ensures high stability and enormous vibration damping thanks to its installation positions. Almost all positions on the workpiece can be reached without reclamping. The selection of workpiece clamping devices and holders in conjunction with the zero-point clamping system makes the machine a versatile machining center. Its design enables wet/dry machining without time-consuming retooling. The CNC machine can be extended with an optional loading and unloading system, which accesses the machine room from the right, left or from above. This allows workpieces to be changed automatically. The zero-point clamping system serves as an interface and ensures the exact and repeatable positioning of the workpiece. The system can be integrated into network-controlled, automated production processes using software interfaces. The maintenance-friendly design and the long-lasting direct spindle drives save service costs and time and offer a reliable machining system. During the design phase, care was taken to ensure that all elements are easily accessible and yet protected from external influences in order to guarantee a long service life. The sophisticated system offers numerous options for expansion.

Condition: excellent (used), Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) Kedjvzlgajpfx Ah Njll suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned via two hydraulic vices. The control system offers simple machine operation. The length can be set using a counter with 0.1 mm resolution. The quantity is set using a quantity counter, which switches the machine off when the quantity is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal band saw HBA 420 AU CNC (420 mm x 420 mm / Ø 420 mm) Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel movable saw band, for cutting profiles, pipes and solid material in all qualities, including extremely difficult-to-machine materials (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw bands. The saw unit is made of solid polymer concrete, which ensures the highest level of smoothness and service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically pre-tensioned hard metal saw band guides. Material tensioning is carried out via two horizontal frame clamps. Material feed via a non-driven roller conveyor integrated into the machine with twelve transport rollers, which makes it easy to transport short leftover pieces. Cutting area round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed continuously variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction continuously variable Material support height 700 mm Saw band dimensions 6300x41x1.3 mm Shortest cutting length with automatic operation 6 mm Remaining piece length with automatic operation 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg. Year of manufacture 1995 Accessories: Chip conveyor, coolant system Special accessories: Driven machine roller conveyor CNC control Frequency-controlled drive Material end via Light barrier Cutting speed and feed controlled

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 20,000 mm, total length: 20,000 mm, total width: 20,000 mm, power: 0.004 kW (0.01 HP), Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel moving band saw blade, for cutting profiles, pipes and solid material solid material in all qualities, including materials that are extremely difficult to cut (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit made of solid polymer concrete, This ensures maximum running smoothness and service life of the saw bands. The saw unit is guided by a vertical and a round column guide. (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw band guides. The material is clamped using two hydraulic clamping vices. The condition of the machine offers simple machine operation. The length can be set on the handwheel with a resolution of 0.1 mm. The number of pieces is set via a piece counter and the machine is switched off when the number of pieces is reached. The material is fed via a feed cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA 260 mm x 260 mm Ø 260 mm) Technical data: Bandsaws KASTO Automatic band saws Machine type SSB 260 VA Technical data 2 column guided Year of construction 1991 Cutting area 260x260 mm Drive power saw gear. 4 KW Drive power auxiliary units 6.5 KW Cutting speed 15-125 m/min Saw feed hydraulics infinitely variable Saw blade dimensions 4115x41x1.1 mm Feed length 600 mm Kodpfornkrusx Ah Nsll Max. with multiple feed 5400 mm Material support 850 mm Machine dimensions Length/width 1690x1900 mm Height 2030 mm Weight of the machine 2100 kg Accessories Chip conveyor Coolant device Multiple feed Side guide rollers Machine roller conveyor Adjustable side guide rollers Prepared for bundle tensioning device Multiple feed counter Hydraulic hold-down device

Year of construction: 2021, condition: as good as new (ex-display), Single head sawing machine with up-feed blade Ø 550 mm and manual positionning of the vertical axis FOM INDUSTRIE PANDA 550 with measuring roller conveyor ASSOMAK VS 7m and inlet conveyor PORTER 4,2m, year 2021 Condition: as new Configuration XZ-10493 PANDA 550: - Ø550 mm tungsten carbide saw blade - Grades digital display (manual rotation) - Hydro pneumatic advance of the blade (adjustable blade exit speed quick return) - Rotation from 20° Lh to 20° Rh on vertical axis - Minimum quantity lubrication (MQL) with pure oil - Working pressure: 7 bar - Saw blade motor, three phase (4 kW) - 2800 rpm, 230/400 V - 50 Hz Oprions installed on the machine: - IV222100 Vacuum cleaner for extraction of chips and fumes Configuration XK100273 ASSOMAK VS 7m: - Minimum cut 0 mm - Maximum cut 7 m - Measurement reading by encoder - Mobile carriage slides along wheels in polymer with belt-driven - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - Work table height adjustment range 820-990 mm - Length stop with sliding surface under the work table, to give constant reference under all working conditions - Pneumatic stop locking - Belt-driven positioning Configuration XK201569 PORTER 4,2m: - Working length 4,2m - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm Kedpfx Aophlnqeh Nsll - Work table height adjustment range 820-990 mm

Year of construction: 2023, condition: new, functionality: fully functional, Xtrutech XTS 35 for powder coatings (180-350 kg/hr) 1. PURPOSE AND MAIN FUNCTIONS OF THE LINE The extrusion line for powder coating production is part of a whole production process and is used for the production of polymer powder coatings. The extrusion line includes the following technological processes: formation of a homogeneous melt of heated powder coating by mixing, shaping of the melt, subsequent cooling of the product and its crushing into fine fractions. 2. LINE COMPONENTS Kedpfx Aswz Ntieh Noll - Twin-screw extruder type XTS 3. DESCRIPTION OF THE EXTRUDER COMPONENTS 3.1. Twin-screw extruder type XTS 35 The extruder for powder coating production consists of: - 24D hydraulically opening barrels at the top and bottom, providing quick access for cleaning, maintenance and emergency repair of barrel liners and screw element shafts. - Rectangular loading port for dosing of materials which are difficult to dose. - Robust high flow water cooled units with 5 electrically heated (aluminium bronze heating plates of 2 kW each) control zones that provide excellent temperature control. Maximum operating temperature is 350°C. - The barrel on the discharge side is equipped with a cooled discharge adapter and a knife. - Screws with screw elements. Screw speed 0 - 900 rpm. Water cooled AC motor power of 26kW. The stepless (PIV) gearbox is rated at 139Nm and protected by an automatic torque limiter. - Latch lock / quick-release coupling of shaft connection and toothed shaft. Mains supply voltage: 400±6%, 3 phases, 50 Hz (o+earth). Control: 24V. Water-supply: 70 l/min at 15°C and a coolant pressure of 4bar. Approximate dimensions: L=2250mm W=1000mm H=1600mm Approximate weight: 1600kg. High-volume geometry D/d =1.8 AC motor power 26 kW Screw speed 900 rpm Average output 180 - 220 kg/h, max. 350 kg/h

Condition: like new (used), Year of construction: 2020, operating hours: 10 h, functionality: fully functional, fuel type: diesel, The machine was manufactured in Germany in 2020. It is in like-new condition, having only been operated during transport preparation trials; the hour meter reads 9.5 hours. This version comes with an extended equipment package included in the price: solid tires (catalog value: 12,000 PLN) and a rigid roof with front windscreen (catalog value: 25,000 PLN). Kedow Edcmjpfx Ah Nell Technical Specifications: Type of drive: Diesel Engine manufacturer: Yanmar Drive power: 22.5 kW Theoretical area performance: 18,000 m²/h Working width: 1,200 mm Working width with 1 side brush: 1,500 mm Working width with 2 side brushes: 1,800 mm Gradeability: 18% Working speed: 12 km/h Filter surface area: 7 m² Weight with accessories: 1,440 kg Equipment: manual filter cleaning system, adjustable main brush, power steering, adjustable suction power, shovel sweeping method, forward and reverse drive, suction system, hydraulic waste hopper lifting, suitable for indoor and outdoor applications, hour meter, sweeping function (can be switched off), solid polymer tires, automatically lowering side brush.

Condition: good (used), Year of construction: 2021, Offered Equipment • Manufacturer / Model: AV Flexologic COSMOLINE 900 • Year of manufacture: 2021 • Serial no.: 051121-1059 • Condition: Excellent – the machine was in active use up to the company closure and can still be inspected under power. Why choose the COSMOLINE 900? The COSMOLINE 900 is an inline washout and drying system for photopolymer plates. It is engineered to simplify and accelerate plate processing while delivering consistent, high-quality results. ✅ Fully automated inline operation – the operator loads a plate, and the machine automatically transports, washes, and dries it. ✅ Superior cleaning – robust water jet with soap mixture, multiple adjustable rotating brushes, plus a large counter-rotating brush for maximum cleaning coverage. ✅ Reliable finishing – an additional brush for removing residues; hot air drying leaves plates clean and ready for immediate use. ✅ High productivity – sensors measure plate dimensions for optimized processing, ensuring stable and repeatable results. ✅ Environmentally friendly – standard centrifugal cleaning system; optional membrane filter available to separate polymer from water. ✅ Flexible & customizable – machine settings can be adapted to individual production requirements. This system is ideal for label and packaging converters seeking dependable, spotless, and perfectly finished flexographic plates with minimal operator effort. Kjdpfx Ajw Tc Upoh Noll Technical Specifications • Maximum plate width: 900 mm • Maximum plate height: 1,200 mm • Standard centrifugal cleaning system (sustainable solution) • Optional membrane filter for polymer recovery (not required for letterpress plates)

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, temperature: 450 °C, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, HIGHLIGHTS - High temperatures - for maximum performance - Quick start - production volume can be preheated in just over an hour - Large print volume - for the high demand for high-end parts made of high-performance plastics - Precise manufacturing - Patented mechatronic X and Y handling - Greater stability with large prints - thanks to the ARGO vacuum leveling system - Better control - Self-leveling of the level, dual gears in the dual extruder, advanced sensor system - Spool temperature control - for dry polymers and filaments TECHNICAL DETAILS Extrusion temperature: 450 °C Hot chamber temperature: 180 °C Hot chamber parameters: Humidity, pressure, temperature Polymers and composites: PEEK, ULTEM™ AM9085F, FLEX-TPU, FUNCTIONAL-NYLON, STRONG-ABS, PP, PC-LEXANT™ AMHI240F, ABS-ESD ULTRA-PLA, Carbon PEEK, and Carbon PA PRO Print Volume: 500 x 500 x 500 mm Kedpfx Ahjwd Sgdj Nell X, Y, and Z Accuracy: 10 / 25 µm Resolution Quality/Speed: 0.225 / 0.300 mm Print Speed: 5,000 mm/min Extruder Tip 2-B: 0.4 mm and 0.6 mm Extruder Tip 2-HA: 0.4 mm and 0.6 mm Extruder Tip 3-HSA: 0.4 mm and 0.6 mm MACHINE DETAILS Dimensions: 1,935 x 1,436 x 2,375 mm Weight: 1,700 kg Power Supply: 15 kVA / 400 V AC / 50 Hz DESCRIPTION - High-performance structure made of aluminum rods and steel cover - Precision ball bearing system and ground steel linear guides - Mechatronic X- and Y-axis motion with hardened C5 helical gear rack and pinion - Z-axis motion with a system of precise C6 ball screws - Moving components and aluminum supports with precision CNC machining - Vacuum system for polymer layer adhesion - Automatic build plate leveling - Security system with door lock - Integrated HT dryer with temperatures up to 120°C and automatic filament loading - Controlled chamber with forced ventilation - Pneumatic assist system Hyperspeed – optional upgrade available (€30,000)

Condition: used, operating hours: 892 h, This robust sweeper from Factory Cat is perfect for sweeping larger areas with varying degrees of dirt. Using the two side brushes, you easily sweep the dirt into the path of the machine. The large main brush then sweeps the dirt into the 116 L steel collection bin. The remaining dust is collected in the filter and all this ensures that you can sweep up large amounts of dirt in one go, without leaving any behind on the floor. The chassis is made of sheet steel and is strong enough to last for years. The side brushes are protected by steel caps, and polymer rollers are installed at the corners on the front. This minimizes damage to the wall and the machine in the event of a collision. Factory Cat cleaning machines are manufactured in America and are known for their strong construction, long life and excellent performance. All major components are easily accessible, making the machine easy to maintain. Other Specifications: - Theoretical capacity: 7,000 sq. ft, - Sweeping width of main brush: 81 cm, - Sweeping width with 2 side brushes: 117 cm, - Side brush diameter: 43 cm, - Battery working time: up to 7 hours, - Power source: 24 V, Klsdpfx Ahsnyiqve Nol - Dumpster capacity: 116 L, - High-loss system: No, - Traction on: front wheel, - Maximum speed: 5.6 km/h, - Filter area: 3.43 sq. ft, - Noise level: 71 dB(A), - Weight (without batteries): 385 kg, - Weight (with batteries): 515 kg, - Dimensions (LxWxH): 163 x 94 x 140 cm, All our occasions are delivered with new wear parts and a new battery pack. The Factory Cat TR therefore sweeps like a new machine again. Would you like to know more about this sweeper? Please contact us, our advisors will gladly tell you more about it!

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 551739, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc automation FastLoad FastLoad loading system Special feature: Fully contained in the machine casing Area of application: Automation solution for low production volumes Access: Operator access from the front of the machine Kedpfxjv Ednqo Ah Nsll Grip set: One set for the entire diameter range Space requirement: Does not increase the machine footprint TECHNICAL DETAILS Peak power grinding spindle: 9.5 kW Directly driven grinding spindle: yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Charging time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Measurement of the tool profile: directly on the machine without removing the tool MACHINE DETAILS Machine base made of polymer concrete: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 14.5 kVA EQUIPMENT - Measuring probe on the grinding head - Possibility of direct tool profile measurement - Machine base made of polymer concrete

Condition: like new (used), For Sale: Complete EOS P110 Setup – Ready for Immediate Use This fully inspected and revised EOS P110 is in outstanding condition, as seen in the photos—it looks practically new! This setup is ready for immediate use and ideal for expanding or starting your SLS production line. Included in the package: • 2 Build frames • Set of hoppers • Unpacking station with sieve • Material mixer Klodpfxoryvilo Ah Njl Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Construction volume: 200 x 250 x 330 mm • Laser type: Coherent CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 material is designed to match or exceed the performance of OEM powders while offering significant cost savings. By switching to our materials, you can lower your production costs without sacrificing quality. Services Included: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options tailored to your needs, ensuring long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the industry leader in providing top-tier refurbished EOS SLS machines with comprehensive support services. As the only provider offering end-to-end solutions for used EOS equipment, we pride ourselves on unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-saving, high-quality consumables like our plug-and-play PA12, designed specifically for EOS systems. • Unparalleled support: From transport to maintenance plans, we handle it all. Trust IM3D for high-performance machines, superior materials, and the expertise to keep your SLS production running smoothly. For more information or inquiries, feel free to reach out!

Condition: ready for operation (used), functionality: fully functional, The Multivac C350 vacuum sealer is ideal for demanding professionals looking for a high-performance and durable packaging solution. Designed to package a wide variety of products, whether solid or liquid, this tabletop vacuum sealer combines robustness and efficiency. Thanks to its powerful 63 m³/h pump, it guarantees optimal vacuum sealing, extending the freshness and shelf life of products. This model offers additional flexibility with its directional casters and polymer loading plates, allowing for easy movement and practical use in different work environments. Equipped with a Securit glass window lid, the Multivac C350 ensures increased visibility during packaging, facilitating process monitoring. The double-seam sealing bars guarantee a reliable, airtight seal, enhancing the safety and quality of the packaged products. Its stainless steel design makes cleaning simple while meeting strict hygiene standards. The Multivac C350 is therefore essential for any food business looking to improve its packaging efficiency with a reliable and durable machine. It is perfectly suited to the needs of professionals, offering a perfect balance between performance, durability, and flexibility. Technical specifications: Pump: 63 m³/h for efficient vacuum Bell dimensions: 420 x 440 x 160 mm Kledowff Azjpfx Ah Nol Sealing: 2 bars, double seam of 1 x 3 mm and 1 x 1 mm Weight: Approx. 160 kg for optimal stability Structure: Stainless steel for easy maintenance and maximum durability 6D3++vHt

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: TX7_600195, total height: 22,500 mm, total length: 25,200 mm, total width: 15,500 mm, workpiece weight (max.): 25 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 7,500 kg, grinding length: 400 mm, grinding spindle motor power: 37,000 W, power: 37 kW (50.31 HP), workpiece diameter (max.): 300 mm, disc diameter: 202 mm, 5-axis CNC tool and cutter grinder - available in used condition or fully rebuilt. Powerful and versatile machine with large working envelope and high spindle power for wide range of operations and requirements. Based on a rigid and stable polymer concrete bed (ANCAcrete), it comes with a 37kW direct driven spindle, 2-station wheel changer for up to eight wheels, automatic pallet loading (520 tools max, 15s loading time), mist extraction unit, steady bed and headstock dressing. Ideally suited for volume production of carbide and HSS cutting tools. !This offer is only available in Europe, Middle East and Africa! Kjdoq Sud Ropfx Ah Njll

Condition: used, Year of construction: 1997, - Printing process: 6-colour UV letterpress - Maximum material width: 300 mm - Maximum print width: 280 mm - Maximum print length (repeat length): 280 x 240 mm - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers Kedpfxswv D Uwo Ah Njll - Die cutting: 1 rotary die-cutting station - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station - Metal-backed polymer printing plates - 11 magnetic print cylinders

Condition: new, ROLLMAT - Roll Die Cutting Machine Key Features: - Fast setup – ready for box production in seconds - 150 tons of punching force for various materials - Compatible with conventional wooden die-cut tools - Mitsubishi PLC control with three modes: single, dual, and automatic transfer - High flexibility – processes corrugated board, fiberboard, plastics, foam and more - Durable and reliable – built to high Zemat TG standards - Manual, semi-automatic, and automatic operation - Safety features – automatic stop, safety doors, and acoustic alarms Applications: - Packaging: die-cut boxes, inserts, blister packs - Materials: corrugated board, solid board, plastics (PVC, PP, PET, PE, HDPE) - Foams: various densities up to 100 mm thickness - Other industries: leather, nonwovens, stationery Additional Features: - Working table widths from 800 – 2500 mm - Auto-stop after transfer on both tables - Programmable cycle control for greater efficiency - High-durability polymer-coated upper roller Kljdpfewvidqex Ah Nel - Optional table extensions available - Custom machines and tooling on request CE/UL certified – compliant with industrial standards

Condition: used, Year of construction: 2005, - Printing process: 6-colour UV letterpress Kledpfx Ahjwv D U De Njl - Maximum material width: 300 mm - Maximum print width: 280 mm - Maximum print length (repeat length): 280 x 240 mm - Maximum speed: 7,200 prints per hour - UV curing: 6 GEW UV dryers - Die cutting: 1 rotary die-cutting station - Rewinder: Integrated with slitting function (5 knives) - Unwinder: With end position sensor - Additional equipment: - Rotometrics print control at the die-cutting station - Metal-backed polymer printing plates - 11 magnetic print cylinders

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature wire to the commutator for the starter armature by diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft welding machine, copper strip welding machine), consisting of the main machine and control system, "PLC control, touchscreen operation". Technical specifications: Dual-stage diffusion welding machine Power data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse: 35 A Water: Supply: 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Find more items - new and used - in our shop! Klodpfxeg Icfpe Ah Nel International shipping costs upon request!

Year of construction: 2024, condition: new, Super Dumbbell – the ultimate punching knife with replaceable precision cutting blades Super Dumbbell has a spring type ejector, is equipped with 5 sets of precision spare blades and therefore represents a set of six punching knives in total. It is ideally designed for manual and pneumatic presses. Excellent price-performance-ratio “6 knives for the price of 1” Replaceable precision cutting blades • Japanese carbon steel: ultra-hard – ultra-sharp – maximum cut resistance • Easy replacement Kledpfxeki Tqce Ah Nsl • No regrinding • No downtime • Ultra-thin symmetrical cutting blades minimize concave test specimen cross sections (Fig. 1) • No more premature tearing of the test bars • Up to 10 % higher tensile strength or elongation at break values • Extremely smooth cut surfaces of test specimens (Fig. 2) • Always available separately Guarantee for: • High-precision test specimens • Reliable and reproducible test results Ideally suited for: • High polymer materials such as rubber, plastics, etc. • Standards of all kinds, such as ISO, DIN, JIS, ASTM, IEC, etc.

Condition: new, functionality: fully functional, Year of construction: 2025, New mobile concrete mixing plant from BLENDPLANTS. Fully automatic, computer-controlled concrete mixing plant for continuous mixing of concrete polymer concrete Liquid soil Soil stabilization Cold asphalt . On-site concrete instead of ready-mix concrete! Produce only as much concrete on site as you need! No residual quantities, no wasted raw materials! . Various machine sizes : 3.5cbm to 15cbm feed material Speed up to 70 cbm / h Batch production from 100 kg Mobile or stationary. Diesel or electro-hydraulic. . BLEND automation: Recipe management - Delivery note printing - Data export via USB - Remote access . We are the German representative of BLENDPLANTS.com. Ksdpfx Ahjtzk Tze Njll . Contact us - we will be happy to prepare your machine offer. Sometimes there are also used machines available! Talk to us !

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, For sale is a FTIR spectrometer - NICOLET IS20 MID-IR DTGS spectrometer which was used for one year as part of a research project. Operation in laboratory environment; no damage; Klsdpfx Asrklx Ieh Nol Scope of sale: 1x NICOLET IS20 MID-IR DTGS spectrometer 1x IS20 German device labeling 1x European Schuko plug, 250V 1x ATR ITX BASE 1x AR diamond crystal for Smart iTX ATR 1x COMP-U-16 Upgrade from monitor 20" to monitor 24" 1x iS10-iS20 TRANSMISSION ACCESSORY 1x ST JAPAN ATR-FTIR POLYMER BUNDLE 1x DELL OPTIPLEX 3090 MT - I3-10105 8GB NP: € 31.998.,77 Sale EXW, tel que

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Klsdpfxofn Iudj Ah Nel Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Condition: good (used), Year of construction: 2016, functionality: limited functionality, machine/vehicle number: 550607, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc FastLoad automation Condition: There may be a defect in the control display. A similar machine, built in 2019, has already been successfully auctioned by the same seller! FastLoad Loading System Special Feature: Fully enclosed within the machine enclosure Application: Automation solution for low-volume production Access: Operator access from the front of the machine Gripper Set: One set for the entire diameter range Space Requirements: Does not increase the machine footprint TECHNICAL DETAILS Peak grinding spindle power: 9.5 kW Direct-drive grinding spindle: Yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool Handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Loading time: 20 seconds Number of tools Ø2 mm: 153 Kljdpov T Uzqofx Ah Njl Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Tool profile measurement: directly on the machine without removing the tool MACHINE DETAILS Polymer concrete machine base: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 16 kVA EQUIPMENT - Measuring probe mounted on the grinding head - Possibility of direct tool profile measurement - Polymer concrete machine base - Grinding wheel changer - Fanuc FastLoad automation