Used Polymer for sale (130)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 430/16, Powder Coating Line (Pass-through Polymerization Oven for Powder Paint, complete with Conveyor System and Dual Paint Booth) Basic technical data of the oven: - Max. external dimensions (L x W x H): 9.6 m x 6.6 m x 2.5 m - Weight: approx. 9,000 kg - Max. operating temperature: 220°C - Max. burner power / GZ50/: 2 x 160 kW - Fan motor power: 24 kW Iodpsu Hib Njfx Afijbc - Power supply: 3 x 400 V +N +PE, 50Hz Maximum workpiece dimensions: - L = 2.0 m - H = 1.0 m - W = 0.6 m Included with the machine: Complete technical documentation + parts lists. The oven is integrated with an overhead conveyor system by JOKŚ. The conveyor system includes 42 m of tracks, along with a drive system and lubrication system; control system with speed regulation in the range of 0.5–1.5 m/min. APAR AR200 speed recorder, LG iG5A series inverter, EATON MFD-AC-CP4 manual power/communication module, MFD-CP4, MFD-80. Manual powder coating booth; pass-through, two-station. Paint access windows on opposite sides, offset. Max. dimension of painted workpiece: - L = 2.0 m - H = 1.0 m - W = 0.6 m A linear overhead transport system runs through the center of the booth. The booth includes 3 tanks adapted for powder recovery/color change, filtration system based on cartridge filters. End tanks equipped with screens.

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm Ibedexfb E Aopfx Afioc workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: used, This listing is for a Thermo Scientific Dionex AS-DV Autosampler. The unit is in full working condition and is ready for immediate release. Please note that ULM do not check or guarantee the provision of software Software Thermo Scientific Chromeleon 7 license key usb- Built for the lab and IT, Chromeleon CDS chromatography software enables both productivity and regulatory compliance with automated controls, data analysis, and security tools. The Thermo Scientific™ Dionex™ AS-DV Autosampler is an innovative solution for automating sample handling in routine ion chromatography applications. It’s designed to enhance productivity while maintaining cost-effectiveness, perfect for labs focused on ion and water analysis. Key Features: Automated Sample Handling: Random Access and Flexibility: Offers random access for multiple injections and filtration, allowing labs to run samples efficiently without manual intervention. High Reproducibility: Ensures consistent results thanks to precise mechanics that control dispense speed and volume. User-Friendly Control: Please note that ULM not to check the software and cannot guarantee the provision Chromeleon™ CDS Software: The powerful software simplifies programming for injection loops and concentrator columns, allowing users to easily set optimal parameters. Advanced Sample Preparation: Optional Six- or Ten-Port Valve: This feature facilitates complex sample preparation techniques, including matrix elimination and sample concentration, enhancing analytical capabilities. Performance & Compatibility: Needle and Flow Path: Constructed from all-Thermo Scientific™ PEEK™, ensuring durability and minimal contamination. Vial Compatibility: Works with 5.0 mL and 0.5 mL polymeric vials, and filter caps can be used for automatic filtration, promoting better results. Injection Volume Range: Supports injection volumes from 0.1 to 5 mL, accommodating various experimental needs. Sample Capacity: Can hold up to 50 vials of either size or a mix of vials, adding to its versatility. Specifications: Dimensions: Iodpfxexhf Utj Afijbc Height: 9 in (23 cm) Width: 17.5 in (44.45 cm) Depth: 22 in (56 cm) Weight: 16 kg Speed Control: Adjustable from 0.1 to 5.0 mL/min in 0.1 mL/min increments. Voltage: Compatible with 100/240 V. Compatibility: Works seamlessly with various ICS systems, including ICS-5000, ICS-2100, ICS-1600, ICS-1100, ICS-900, and legacy IC systems.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,612 mm, travel distance Y-axis: 5,645 mm, travel distance Z-axis: 1,250 mm, table length: 7,000 mm, table width: 2,500 mm, spindle speed (max.): 4,500 rpm, distance between stands: 3,800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between uprights: 3,800 mm • Distance table surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Spindle speed, 2-step, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC operation (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y- and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain path control iTNC 530 with 15" monitor • Tool changer with 60 positions • Rotary table for operation with multiple milling heads and automatic milling head change, consisting of collet system for holding various milling heads, quick couplings for hydraulic, coolant, and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table using Hirth face toothing (on the mounting plate and respective milling head) • 2 x milling heads: straight-head adaptor (direct spindle), automatic 45° milling head • Crossbeam motorized traversable (for positioning only) Iedjxgr Epopfx Afiobc • Operator platforms: 2 operator platforms with protective enclosure and integrated control panel, traveling along X-axis, each with 2 doors • Chip conveyor on both sides of the table plus a transverse conveyor • X-axis longitudinal and Y-axis cross drive by rack and pinion with 2 servomotors (play-free electronic pre-tensioning, master-slave principle) • Z-axis vertical adjustment by ballscrew (Ø 80) with preloaded double nut • Zayer guideway system made of inlaid or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each track surface • Counter-guides on all axes with additional polymer coating for optimal damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for completeness or accuracy. The decisive factors are the actual technical data and functions of the machine.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P014111, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, total length: 6,835 mm, total height: 2,800 mm, total width: 2,900 mm, overall weight: 3,900 kg, type of input current: three-phase, saw blade speed: 160 rpm, cutting range square steel at 90°: 80 mm, cutting diameter: 100 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 160 rpm, space requirement height: 2,800 mm, space requirement length: 6,835 mm, input voltage: 400 V, space requirement width: 2,900 mm, cutting length (max.): 3,000 mm, coolant pump power: 1,500 W, saw drive: 11,000 W, warranty duration: 3 months, Equipment: rotational speed infinitely variable, The Everising P-100C circular saw is designed for high-productivity and maximum efficiency in cutting steel materials. This is a fully automatic saw equipped with a bar feeder, minimizing operator dependency. The user-friendly and intuitive touchscreen control allows the operator to select from up to one hundred different pre-set configurations, specifying diameters, lengths, and cutting conditions, so parameters do not need to be re-entered each time. The saw’s cutting head is mounted on preloaded linear guides and is driven into the cut by a servo motor via a ball screw, ensuring smooth and precise cuts. The frame of the saw is mounted on beams filled with polymer composite, effectively dampening vibrations and extending the blade’s service life—important as unwanted vibrations can significantly affect blade longevity. The circular saw comes with a 6-meter gravity feed conveyor with a magazine. The machine’s structure is deliberately over-dimensioned for enhanced reliability and longevity. The clamping system is of robust construction with adjustable clamping force, ensuring optimal retention for solid materials and controlled clamping for profiles to prevent deformation. Also included is a vertical clamp to correct any material curvature, ensuring perpendicular cuts wherever possible. Material feed is powered by a servo motor and ball screw, with the feeder vice moving up to 60 m/min while maintaining maximum feeding accuracy, resulting in the shortest possible cutting cycle times. The saw features optical material detection for rapid and precise recognition of stock in the feeder. The cut is cooled by an oil mist system, atomizing oil and air over the cut to reduce friction and effectively cool the blade. Iodpfxoxgdcye Afiebc

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 20,000 mm, total length: 20,000 mm, total width: 20,000 mm, power: 0.004 kW (0.01 HP), Fully hydraulic high-performance bandsaw in an extremely robust design, featuring a horizontally and parallel traversing saw blade, for cutting profiles, pipes, and solid materials of all qualities, including materials that are extremely difficult to machine (e.g. titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw blades. The saw head is made from solid polymer concrete, ensuring exceptional vibration damping and maximizing the service life of the saw blades. The saw unit is guided via a vertical and a round column (double column guide) fitted with hardened and ground guide strips. Hydraulic saw blade tensioning and hydraulically preloaded carbide saw blade guides provide additional precision and performance. Material clamping is accomplished with two hydraulic vices. The machine is user-friendly thanks to its intuitive controls. Cutting length is set using a handwheel, with a resolution of 0.1 mm. The piece count can be preset via a counter; the machine automatically switches off once the specified quantity is reached. Material feed is handled by a hydraulic feed cylinder, guaranteeing highest cut length accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA 260 mm x 260 mm (Ø 260 mm) Ibsdpfjxc D Egjx Afijc Technical Data: Bandsaws KASTO Bandsaw Automatic Machines Machine Type: SSB 260 VA Technical Specification: Double column guided Year of manufacture: 2000 Cutting range: 260 x 260 mm Drive power, saw gearbox: 4 kW Drive power, auxiliary units: 6.5 kW Cutting speed: 15–125 m/min Saw feed, hydraulics: Infinitely adjustable Saw blade dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Max. multi-stroke feed: 5400 mm Material infeed height: 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories: • Chip conveyor • Coolant system • Multi-stroke feed • Side guide rollers • Machine roller conveyor • Adjustable side guide rollers • Prepared for bundle clamping device • Multi-feed counter

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Ijdpfx Ajxcbnrofiobc Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: MY2340CX03, warranty duration: 6 months, 🔬 High-quality laboratory instrument – Fourier Transform Infrared (FTIR) Spectrometer 📌 Key Details: Ibedpfx Aexfa R Rofisc Model: Agilent 5500a FTIR Compact design, ideal for routine laboratory analysis Advanced infrared technology for chemical and material identification Comes with original software pre-installed on a dedicated laptop Condition: Like new / barely used, fully functional Typical applications: chemical analysis, pharmaceuticals, food industry, polymers, and research laboratories 📦 Included: Agilent 5500a FTIR main unit Dedicated laptop with FTIR software installed Standard accessories and power cables User manual/documentation ⚖ Shipping Information: Weight: ~50 lbs → 800 oz (including laptop) Dimensions (L×W×H): 26 × 18 × 12 in Carefully packaged for safe shipping

Condition: used, This listing is for the VELP ZX4 Mixer Vortexer The unit is in full working condition and is ready for immediate use The VELP ZX4 is a robust, high-performance vortex mixer designed for everyday lab mixing needs. With variable speed control, a patented infrared (IR) sensor mode, and a wide accessory range, it’s ideal for labs that require ergonomic and flexible operation. Key Features & Benefits Variable Speed Operation Electronically controlled vortexing with speeds from 0 to 3,000 rpm, ideal for gentle mixing or vigorous agitation. Dual Operating Modes IR Sensor Mode (patented): Automatically activates mixing when a test tube is detected—no need to press down. Continuous Mode: Maintains consistent mixing without user interaction. Universal Power Compatibility Works with a universal voltage/frequency range (100–240 V, 50/60 Hz), making it ideal for international labs. Compatible with various attachments for tubes, microplates, and small flasks. All accessories attach via simple pressure-fit—no tools required. High Chemical Resistance Durable technopolymer casing offers optimum resistance to common lab chemicals and solvents. Exceptional Stability A zinc alloy base provides outstanding stability even at high speeds. Large anti-slip rubber feet ensure the mixer stays securely in place during operation. IP42 Protection Designed with IP42-rated protection against particle ingress and liquid splashes—safe for demanding lab environments Applications Iodpexhfzgefx Afiobc Mixing of microcentrifuge tubes, PCR tubes, vials, and microplates Ideal for biology, chemistry, and biochemistry labs Perfect for repetitive tasks—IR sensor mode reduces wrist strain

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 159422, Verderflex Dura 35 peristaltic pump, serial number: 159422, MFG: 2024 For demanding applications, the Verderflex Dura 35 provides: Maximum flow rate: 5,292 L/hr Maximum pressure: 16 bar Maximum medium temperature: 80 ºC Compressible solid size: 8.75 mm Suction lift: 9.5 mWc Certification: ATEX, FDA and EC/1935 Pump Housing made from cast iron (GG25) Front Cover made from carbon steel with plexiglass inspection window Rotor made from cast iron (GG25) Drive Shaft EN24T Steel Mounting Frame made from carbon steel Torque Arm made from carbon steel Bearing made from bearing steel Flow 11/hr Pump speed 35 PM Installed motor power 25W Max turndown at 5 Bar discharge pressure 101 Verderflex peristaltic pumps are the ideal low cost life cycle solution for the transfer and dosing of difficult to pump fluids such as viscous, abrasive or high solid content liquids such as slurry and sludge. Sizes range from small models such as OEM pump modules, precision and industrial style tube pumps to the world's largest hose pumps, used in the most demanding applications. These include water treatment, biotechnology, food & drink production, mineral processing and chemical manufacturing. Features : • Peristaltic pumps are excellent problem solving pumps and offer the following benefits: • Abrasion Resistant • No moving parts in the liquid stream • Accurate Dosing • Self Priming • Can pump liquids containing up to 80% Ijdpfxowdtbcs Afiebc • inorganic solids (fines) • Aseptic pumping • smooth liquid passage • Easy and completely cleanable without disassembly • Suitable for handling shear sensitive products • Can run dry • Low cost of ownership • High suction capability of up to • 95% vacuum or a 9.5 mWc • No seals • Reversible rotation, empties line or blockages • Can pump • abrasive, very viscous or • high density fluids Application for abrasive fluids : Lime mixing, Kieselguhr, circulation and dosing Application for corrosive fluids : Ferric Chloride, Copper Sulphate and similar Activators, process chemicals, Acids, including Alkalis Application for shear sensitive fluids : Coagulants, Flocculants and bacterial remediation treatments Application for mining industry : Dosing Process Reagents, Thickener Underflow, polymers and slurry transfer Application for water treatment : Dosing Lime, Hypochlorite, Silicate, Polymer, Ferric Chloride, sludge transfer and filter press feeds Application for chemical Industry : Corrosive Acids, Bases and Hydrocarbons Application for Printing and packaging : Inks (including water based inks), Paints, Dyes and Glue Application for Battery Filling, Chemical Cleaning, Equipment Sterilising, Seed Coating : Biocides, Hydrogen Peroxide, Sodium Hypochlorite, Caustic Soda Application for Laboratory Systems : Biological Broths to polluted streams Application for Agriculture : Feed Additives, Animal Vaccines and Waste Transfer Application for Paper and Pulp : Pulp and Dyes Food and Beverage : Breweries, Diatomaceous Earth, wineries, dairies, sugar refining, abattoirs The pump is in excellent condition, like new. Price Euro 4.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: reconditioned (used), For Sale: EOS P100 – Ready for Immediate Use This EOS P100 has been fully inspected and revised, making it ready for immediate use in your production environment. Included in the package: • 2 build frames • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer a wide range of plug-and-play materials, fully tested and optimized for use with EOS machines. Our Inframotion PA12 delivers top performance and provides significant cost savings compared to OEM powders, without compromising on quality. Choose our exclusive materials to drastically reduce your operational costs. Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation included. • Warranty & Maintenance Plans: Flexible options tailored to your specific needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we distinguish ourselves through extensive expertise and unique services. What we offer: Ijdpfxorm Tdwo Afiobc • Expert maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS machines. • Complete support: From transport to maintenance plans, we handle it all. Trust IM3D for reliable machines, superior materials, and the expertise to optimize your SLS production. Feel free to contact us for more information or inquiries!

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Ibsdow U A Ixopfx Afioc Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Hot washers with recirculation systems Sink-float separation stage Post washer and recirculation system (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. Iedpfx Ajxcnxdsfiebc The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2019, total length: 2,163 mm, total height: 1,370 mm, total width: 1,331 mm, UnionTech Pilot 450 (2019) – Ex-display, like new – €84,900 (ex-VAT) Industrial SLA 3D printer with large build volume and excellent surface quality. Ex-display unit from 2019, fully functional and in “as-new” condition. Immediately available in Ostrava, Czech Republic. What makes the UnionTech Pilot 450 stand out? ✅ High Precision and Smooth Surface Finish SLA technology delivers detailed prints with outstanding surface quality and layer thickness down to 0.05 - 0.25 mm. ✅ Large Build Volume With a build size of 450 × 450 × 400 mm, you can print large parts in one piece – no splitting or post-assembly required. ✅ Wide Range of Compatible Materials Supports various photopolymer resins for functional prototypes, design models, and technical applications. ✅ Easy Operation with Intuitive Software Iedpfewat Arsx Afiobc A user-friendly interface and advanced slicing software ensure a smooth workflow from design to final print. ✅ Robust Industrial-Grade Design Built for long-term use in demanding environments – ideal for manufacturing, R&D, and product development. Packing & shipping across EU/UK. FCA Ostrava, Czechia (Incoterms 2020); VAT handling per buyer status; export outside EU possible

Condition: used, This listing is for 1 of 2 Quattro Fluid SystemFlow 1000S These units is in full working condition and is ready for immediate use Overview & Application The Quattroflow 1000 S is a quaternary (four‑piston) diaphragm positive‑displacement pump—engineered for gentle, sterile handling of shear‑sensitive fluids such as proteins, vaccines, cell suspensions, and other biopharmaceutical or food-grade products. Its design features—like seal‑less operation, low shear, low pulsation, and dry‑run capability—make it ideal for critical applications including: Filtration systems: Tangential‑flow filtration (TFF), recirculation pumps, filter cartridges Chromatography: Gradient mixing and feed pumps Centrifuge feeding and homogenization Aseptic filling lines and other sensitive processing tasks Iedpfx Aexhfp Rjfisbc Commonly processed media include albumin, IgG antibodies, enzymes, vaccines, cell and virus suspensions, dairy products, and cosmetic or polymeric solutions. Technical Specifications Here’s what’s known about its performance and build: Flow rate: Continuously variable between ~25 to 1000 L/h (at atmospheric pressure); around 750 L/h at 6 bar (depending on configuration) Max Pressure: Up to 6 bar, with high‑pressure variants available upon request Drive mechanism: Four‑piston diaphragm setup actuated by an eccentric shaft; standard variant uses a 5° eccentric shaft reaching up to 1,800 rpm Material & Construction: Pump head: Stainless steel grades 1.4435 or 1.4539, optional alternatives (like PEEK) available Membranes: Santoprene (diaphragm), EPDM (valve membranes) Priming and Pumping Features: Self‑priming, dry‑run capable Four directional porting—pump orientation flexible No shaft seals or wetted rotating parts, minimizing wear and product heating Internal volume (filling volume): Approx 35 mL; designed to minimize dead volume and aid product recovery Connections: Standard ¾″ TC (Tri‑Clamp) sanitary ferrule; other flange types available Dimensions & Weight: Pump: 523 × 155 × 212 mm, ~23 kg Control unit (frequency inverter): 350 × 155 × 212 mm, ~6 kg Electrical: 230 V AC (50 Hz) via a control box with 6.3 A fuse; motor IP54, control box IP53 Key Advantages This model offers several standout benefits: Gentle, high‑integrity fluid handling—ideal for fragile biologics due to low shear and pulsation Contamination-free design—no mechanical seals, minimal abrasion Robust operation—powerful 370 W motor, simplified maintenance with fewer parts Aseptic and sterile process readiness—autoclavable, self‑draining, hygienic construction Installation adaptability—four flow directions, small footprint, flexible hookups

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. Iodpfjfiulfox Afiebc 3 racks for extraction vessels. Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.650+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, mileage: 227,000 km, power: 265 kW (360.30 HP), first registration: 04/2013, overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, parking heater, Manufacturer MAN Model TGS 26.360 6x4H*4 Simon Moos KSA VacuDrain Year 2013 Condition Good Serial Number WMA35SZZXDM618777 Ref. nr. 1017672 Reg. date: Hk: 360 Km: 227000 Gearbox: Manual Eurotype: 5 Diesel tank: 1 Tank liter: 400 L Rear view camera: ? Air conditioning: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65R22.5 - 315/80R22.5 - 385/65R22.5 Cover% left 50% 50% 50% Front suspension: Feather Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 26000 Kg Net weight: 17735 Kg Load capacity 8265 Kg Manufacturer: Simon Moos KSA 1275 Type 1 High pressure pump: Pratissoli KF36 High pressure capacity: 120 l/min - 120 bar High pressure pump hours: 204 Vacuum pump: Samson V15 (KS725) Vacuum capacity: 900 m3/h Vacuum pump timer: 3157 Sludge pump: Allweiler AEB 1L 551 Sludge pump capacity: 30 m3/h Sludge pump hours: 2397 Polymer pump: Allweiler SNP 25.1 Polymer pump capacity: 2.4 m3/h Polymer pump hours: 2347 Remote control: ? Water heater: ? Tank capacity sludge tank: 4900 L Tank capacity drainage tank: 8400 L Tank capacity polymer tank: 1700 L Ibsdpfx Aou A Hnxefijc Tank capacity reject water tank: 3600 L Suction hose 3" 1x30m + 2x15m Flush hose: 1x80m + 1x8 m - 1/2"

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols. Iedsiryd Uspfx Afiebc

Condition: used, Year of construction: 2014, machine/vehicle number: GX7_801256, total height: 1,900 mm, total length: 2,010 mm, total width: 2,500 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 12,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 1.9 kW (2.58 HP), 5-axis CNC tool grinding machine - available used or reconditioned. Powerful production machine with polymer concrete bed (ANCAcrete), 19kW-, 12.000/min spindle, 2-fold wheel changer for up to eight grinding wheels. !Offer only available in Europe, Africa, Middle East! Ijdpfx Afstwn Tfjiobc

Condition: used, This listing is for the Thermo Scientific Vanquish UHPLC Sytem The unit is in full working condition and is ready for immediate use Overview: Thermo Scientific Vanquish UHPLC Systems 1. Autosampler Purpose: Introduces the sample into the mobile phase stream automatically. Picks up sample from vials, plates, or tubes Injects with high precision (often nL to µL volume range Iedpexhfkzofx Afiebc 2.Pump Module Purpose: Delivers the mobile phase (solvent) through the system at high pressure. Binary pump: Mixes two solvents at high pressure. Ideal for fast gradients. Quaternary pump: Mixes up to four solvents at low pressure. More flexible, but slower gradients. Controls flow rate (e.g., 0.001–5.000 mL/min) Enables gradient elution (changing solvent composition over time 3.Detector Module (x2) Purpose: Detects and measures analytes as they elute from the column. Diode Array Detector (DAD/UV-Vis) – most common; detects UV-absorbing compounds Fluorescence Detector – for fluorescent compounds Charged Aerosol Detector (CAD) – universal detection for non-UV compounds Refractive Index Detector – for sugars, polymers MS (Mass Spectrometer) – advanced, highly sensitive detection Thermo Fisher’s Vanquish platform includes several variants tailored to different analytical needs—from routine HPLC to ultra-high-throughput and low-flow LC–MS workflows: Vanquish Flex UHPLC: Offers flexible HPLC/UHPLC method development and operates up to 1000 bar. It supports binary, quaternary, and dual pumps, plus intelligent tools like solvent monitoring and optional touchscreen interface. Vanquish Horizon UHPLC: Built for maximum performance, offering ultra-high pressure (up to 1500 bar), ultra-low gradient delay volume, biocompatible flow paths, and exceptional retention time stability and detector sensitivity. Vanquish Neo UHPLC: Designed for next-gen low-flow LC‑MS workflows (nano‑ to micro‑flow), delivering high‑sensitivity, high‑robustness separations. Vanquish Analytical Purification LC: Specialized for precise fractionation—high pressure (700–1500 bar), customizable flow (up to 10 mL/min), integrated fraction collector, multimodal detection, and advanced automation. Key Features Across the Platform Modular Design: Choose components (pumps, samplers, detectors, thermostatting units) to configure a tailored system. Most models offer biocompatible flow paths and Viper fingertight fittings for low dead‑volume, tool‑free setup. Temperature Control: High-performance column compartments with active/passive heating, pre‑heating, and post‑column cooling to manage frictional heating and improve reproducibility. Detection Options: Available detectors include Diode Array (with LightPipe optics for superb sensitivity), Charged Aerosol Detector (CAD) for near‑universal detection, fluorescence, multi‑wavelength, refractive index, and mass spectrometry detection. Software Integration: Fully compatible with Chromeleon CDS (with SII for streamlined MS integration), plus Xcalibur and TraceFinder for LC‑MS workflows. MS Integration: Vanquish systems interface seamlessly with Thermo MS platforms—Triple Quadrupole and Orbitrap—for sensitive, accurate mass analysis. Operational ROI: Thermo highlights reduced unplanned repairs, improved productivity, and net-zero ambitions through renewable-powered manufacturing.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: Iedpfx Aeuiq Dhsfiebc • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, mileage: 118,000 km, power: 265 kW (360.30 HP), first registration: 04/2019, overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, gearing type: mechanical, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, Manufacturer MAN Model TGS 26.360 6x4H*4 Wiedemann Year 2019 Condition Very good Serial Number WMA35SZZ7KM816181 Ref. nr. 1107870 Reg. date: Hk: 360 Km: 118000 Gearbox: Manual (ZF 16 S 222 OD Servo-Shift) Eurotype: 6 Ijdpfjwqvu Ejx Afiebc Diesel tank: 1 Tank liter: 390 L Rear view camera: ? Air conditioning: ? Cabin type: TGS Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385 / 65R22,5 - 315 / 80R22,5 - 385 / 65R22,5 Cover% left 40% 40% 80% Front suspension: Springs Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 26.000 Kg Net weight: 17.500 Kg Load capacity 8.500 Kg Manufacturer: Wiedemann Tank capacity sludge tank: 4900 L Tank capacity drainage tank: 8400 L Tank capacity polymer tank: 1700 L Tank capacity reject water tank: 3600 L High pressure pump: Pratisolli KF36 - 120 l/min 120 bar High pressure pump hours: 108 Polymer pump: Allweiler SNP 25.1 - 2.4 m3/h Polymer pump timer: 917 Sludge pump: Allweiler AEB 1F 553 - 30 m3/h Sludge pump hours: 931 Vacuum pump: Samson V15 (KS725) - 850 m3/h Vacuum pump timer: 1454 Remote control: ? Water heater: ? Suction hose 3": 1x30m + 2x15m Flush hose: 1x30m 1/2" + 1x30m 3/4" + 1x8m 1/2"

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Ibodpfx Aoil Agnsfisc Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Condition: used, This listing is for the Thermo Scientific Nicolet IS050-IR Spectrometer + 2 Packs accessories The unit is in full working condition and is ready for immediate use An advanced FT‑IR spectrometer designed as an all‑in‑one materials‑analysis workstation. It’s built to provide definitive answers in analytical workflows, offering lab-ready versatility and performance. News-Medical Marketed as the first research-grade FT‑IR with one‑touch operation, delivering access to multiple techniques with minimal manual intervention Key Features & Capabilities Hardware Highlights: Dual-source capability—includes both a durable Polaris IR source and a tungsten-halogen white light source. Iodpfx Aoxhfknefiebc Three detectors in the main sample compartment, plus high-resolution optics as standard. Gold reflective optics by default (aluminium available), plus a validation wheel and motorised energy screens for tuning intensity. Optional motorized purge shutters, optical filters, and polarizers, along with selectable beam configuration (collimated or focused). Expandable Module Options: You can easily expand capabilities—without swapping hardware—using “one-touch” modules: Diamond ATR (Attenuated Total Reflectance) covers mid- and far‑IR spectra. Automated Beamsplitter Exchanger (ABX) allows automatic switching between IR ranges. Raman accessory—placed in the sample compartment—enabling video‑guided, fluorescence‑free Raman spectroscopy. Near-Infrared (NIR) module with integrating sphere and fiber‑optic options for bulk solid/liquid analysis. TGA‑IR and GC‑IR modules—integrate with thermal or gas chromatography systems for in-depth material identification. TEC-MCT (thermoelectrically cooled) detectors for high-speed, sensitive IR detection without liquid nitrogen. Performance & Usability: Spectral range spans from far-IR to near-IR and even into the visible, with resolution better than 0.09 cm⁻¹. Automated performance verification using NIST-traceable standards ensures accuracy and consistency. Cloud-enabled data access via Thermo Fisher Connect and OMNIC Anywhere app—sync, share, and analyze spectral files remotely on any device. Ideal Applications The system is suitable for an impressive range of fields, including: Polymers and rubbers Forensic analysis Pharmaceuticals Pigments, paints, inks Food, flavors, oils General laboratories with multi-technique demands

Condition: used, This listing is for the This listing is for the Bruker microflex spectrometer mass The unit is in full working condition and is ready for immediate use The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ijdpfx Asxhdxqofiebc Ion Source: Vacuum chamber with MALDI target plate Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Environment: Requires clean, stable temp/humidity condition