Decanter

Hiller DecaPress DP45N-422 VA-HY Container

Condition: used, Year of construction: 2001, inner diameter: 450 mm, wall thickness: 11 mm, overall weight: 3,200 kg, System: Decanter / centrifuge, used Manufacturer: Hiller Model: DP45-422 Lrodpsvz A Uzefx Ad Nog Mach. No.: 2818 Year of manufacture: 2001 Maximum drum speed: 3800 l/min Drum inner diameter: approx. 450 mm Drum wall thickness: 11.0 Drum material: H2/ST52 Weight: approx. 3200 kg Permissible density 1.50 kg/dm3

Condition: good (used), functionality: fully functional, Opening: 620 x 350 mm Rotor-diameter x -width: 1.060 x 610 mm feed size hardrock -180 mm feed size limestone -300 mm, Ledpfxjlgzrho Ad Nerg complete with E-drive, conveyor and steel-construction

Condition: used, Used olive oil production line with output capacity of 7 tons/hour. The equipment was made by Pieralisi in 2004 and is currently still in operation. Major equipment includes: - Leaf remover - Olive washing machine - Olive crusher - 700 litre Malaxer Panorama - 1000 litre Malaxer Panorama - Electric panels - Decanter centrifuge Elephant S 470/2 - Vibrator filter for Elephant S 470/2 - Decanter centrifuge Jumbo 2 - Decanter centrifuge Major 3 - Vibrator filter for Major 3 - Separator 1500-2000 Lrodpfxex Nim So Ad Nog Full equipment list on request.

Condition: ready for operation (used), functionality: fully functional, total height: 1,200 mm, total width: 580 mm, total length: 820 mm, input voltage: 230 V, The machine is designed for pitting plums, leaving the plums whole. Electrical connection: 230 V. Machine dimensions mm: 820 x 580 x h1200. Lsdpfxew H I Tre Ad Njrg Originally, the machine is equipped with 10 blades, but 2 blades were already lost when it was purchased, but this does not interfere with the operation process at all. Only the yield is slightly lower. Productivity with 8 blades: 100 fruits / 1 minute Hole diameter: 30 mm. Machine weight: 100 kg.

Condition: good (used), The Pieralisi Decanter is a high capacity horizontal centrifuge designed for industrial applications requiring efficient solid-liquid separation. The decanter is used for the separation of two or more specific phases of different densities, especially for the clarification of liquids in which suspended solids are present. The separation of solids and liquids takes place inside a cylindrical-conical rotating drum, where the heavier solid phase is collected on the periphery and continuously removed by an internal conveyor. Its key technical specifications are detailed below: Technical specifications: - Drum diameter: 470 mm - Maximum drum speed: 3,350 rpm - Drum ratio: 5.28 l/d - Typical applications: wastewater treatment, sludge separation, processes in the food and chemical industry. Lsdpfjwxwz Aox Ad Nsrg

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Lrodpfsv Taiajx Ad Nsg Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Lodpfxoppucas Ad Njrg Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Purchase and rent possible.

Condition: used, Used syrup room with pasteurizer Alfa Laval This second hand Syrup Room is a complete processing section designed for the preparation of concentrated base syrups and finished syrups for beverage production. Engineered for integration upstream of a premix and an isobaric filler, it supports efficient industrial packaging workflows in a used bottling line. It is ideal for beverage production environments that require reliable sugar dissolving, thermal treatment, and hygienic storage prior to mixing, carbonation, and filling. The system covers the full syrup preparation sequence: simple syrup creation from treated water and sugar, finished syrup blending with concentrates, acids, colors, and flavors, and hygienic storage in stainless steel tanks. A dedicated pasteurizer helps ensure product stability, while mixers and pumps support consistent, repeatable processing. This Syrup Room is well suited for soft drink formulations such as cola, tonic, and other flavored carbonated beverages, and it integrates seamlessly with premix units that add CO2 just before the filling machine. The plant layout and component selection make it a practical solution for upgrading or expanding a used bottling line in the beverage production sector. Technical Specifications & Performance Data Sugar dissolver: AICMA Pasteurizer: Alfa Laval Lsdsxywg Sepfx Ad Norg Storage tanks (finished/simple syrup): 4 x 4,000 L Cavalzani Storage tanks (finished/simple syrup): 3 x 2,000 L Bertuzzi Mixers and pumps: Included for circulation, transfer, and blending Process materials: Treated water, sugar/sweeteners, fruit concentrates, flavors, additives Construction: Stainless steel AISI 304/316 process equipment Cleaning: CIP-ready design for sanitary cleaning in place Advanced Automation & Control Systems The Syrup Room features a centralized control panel with analog/digital selectors for process management, enabling operators to supervise dissolving, thermal treatment, storage, and transfer operations. Dosing can be achieved using precision pumping and flow control to maintain recipe accuracy. Hygienic design, sanitary valves, and instrument connections support repeatability and quality. The configuration is suitable for integration with plant-level automation and recipe control, with clear operator interfaces that simplify changeovers and routine adjustments while supporting safe and reliable operation. Production Line Integration Capabilities This processing plant is designed to feed finished syrup to a premix unit, where it is blended with treated water and CO2 immediately before the isobaric filler. It can be integrated inline with existing beverage production and industrial packaging equipment and is compatible with used bottling line layouts handling both PET and glass bottling downstream. Recipe-based operation supports multi-flavor portfolios, and transfer connections allow straightforward tie-in to upstream water treatment and downstream premix and filling systems.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Lredpfxewnx Ngo Ad Neg Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Lrodpfx Asrunu Iod Neg