Used Plunge Pool for sale (215)

Condition: good (used), Various wire spools for calendars/exercise notebooks. Bledpfxjwlgvcj Acnel Various Wire-O spools 2:1 (various colors, various plastic rollers for spiral binding). Calendar hangers, shafts

Condition: used, Single-acting hollow piston cylinder with spring return ENERPAC Hydraulic ram, hydraulic cylinder, hollow piston cylinder, machine lifter, clamping cylinder Model: BRH 1003, predecessor of RCH 1003 Lifting capacity: 100 tons Operating pressure: 700 bar Piston stroke: 76 mm Piston rod diameter: 127 mm Outer diameter: 215 mm Closed height: 255 mm Through-hole diameter: Ø 79 mm Bodpsxciuaefx Acnoll Internal thread: Ø108 mm 12G" Hydraulic connection thread on cylinder: M18x1.5 - Hydraulic connection with high-flow quick-coupling type CH-604, thread M30x1.5 mm Net weight: 55 kg Very good condition 16 units available, price per unit

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller Bedpfshx R Etsx Acnjll - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Condition: good (used), Year of construction: 2017, machine/vehicle number: HD 11610556, pressure: 350 bar, overall weight: 850 kg, power: 30 kW (40.79 HP), Equipment: type plate available, Used high-pressure plunger pump with integrated gearbox and special crosshead seal. Designed for low-viscosity media. Main areas of application in industry and services: - Sewer cleaning - Descaling - Industrial high-pressure cleaning Bsdotuqlxopfx Acnoll - Special applications Technical specifications: Type: KD716-GK Year of construction: 2017 30kW Pressure: 350 bar 1500 1/min 47 l/min With Elektra electric motor 14BG 220-4AA60-Z 225S 400 / 690V 68 / 39.5A 50Hz 37kW 1475 1/min Condition: used (see pictures and type plates) Scope of delivery: 1 PUmpe

Condition: used, Technical details: x-travel: 800 mm Bljdpfjwix E Rjx Acnel y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... *

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Bedpfsvtdztox Acnell

Condition: used, functionality: fully functional, mileage: 274,460 km, power: 132.39 kW (180.00 HP), first registration: 05/2011, fuel type: diesel, fuel: diesel, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, trailer coupling, MAN TGL 8.180 ROLLER SHUTTER - Manufacturer: MAN - Type: TGL 8.180 - Roll-up door - First registration: 19.05.2011 - Kilometers: 274.460 km - Gross vehicle weight: 7.500KG - Power: kw/hp 132/180 Bledju Et Ahopfx Acnjl - Gearbox: Manual gearbox - Euro: 5 - German vehicle YES - German papers YES - Ready for immediate use YES You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bodovvkfdjpfx Acnell

Condition: excellent (used), functionality: fully functional, center height: 125 mm, grinding length: 600 mm, grinding diameter: 249 mm, control cabinet length: 1,200 mm, control cabinet width: 40 mm, grinding spindle speed: 1,530 rpm, control cabinet height: 1,500 mm, overall weight: 3,250 kg, For sale is a cylindrical grinding machine manufactured by Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Specifications: Centre distance: 600 mm Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel turn, coarse/fine: 20/2.5 mm Speed, hydraulically adjustable: 0.02–6 m/min Minimum reversing travel: 1.5 mm Dwell time at reversal, adjustable: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with feed handwheel, coarse/fine: 220 mm Bljdpeyyn Ehefx Acnel Travel per handwheel turn, coarse/fine: 4/0.5 mm Rapid traverse and return, hydraulic: 50 mm Feed, electro-mechanical with stepper motor: 0–9.99 mm/Ø Micro-stop of feed, per graduation: 1 µm/Ø Plunge grinding: Feed rate coarse/fine: 1–49/0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor rating: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Spindle internal taper: Morse 5 Motor rating: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed with Hydraulic Steering Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed Semi-Trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Total width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40 / 60 / 80 km/h) Chassis & Axles * 2 axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension travel: 260 mm (190 mm / -70 mm) * Additional ride height lift by 40 mm possible * Load gauge for axle load display * Semi-automatic alignment of steered axles with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system according to UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED tail and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED beacon (1 unit) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system according to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on the gooseneck Steering & Operation * Hydraulic steering on both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load display * Suspension control Bledoycnbaepfx Acnol * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie bed connection * Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2-inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood floor * Each platform size: 100 × 1,300 × 2,115 mm * Each platform weight: 225 kg * 2 × lashing rings per platform with 8,000 kg tensile force * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform Stake pockets: * 6 × 2 units in the pool (50 × 100 mm) * 3 × 2 units at the rear (50 × 100 mm) Attachments & Accessories * Aluminum front panel on gooseneck: 360 × 1,550 mm * Aluminum side boards: 360 × 1,900 mm * Aluminum rear wall: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning panels (423 × 423 mm, up to 1,000 mm) * Yellow side reflector tape * Red rear reflector tape For further information, we are at your disposal.

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed Trailer with Hydraulic Steering Highlight: Optionally available for rental as a complete combination together with the truck shown in the photo. Manufacturer: Kässbohrer Type / Vehicle Code: K.SLL 2 / 2H ? 18 / 20 Vehicle Type: Lowbed Semi-Trailer Country of Registration: Germany Brand: Kässbohrer Chassis Color: RAL 3020 Traffic Red Dimensions & Weights External Length: 13,210 mm * Overall Width: 2,540 mm * Fifth Wheel Height (H5): 1,250 mm * Platform Height (unladen): 910 mm * Platform Height (laden): 300 mm * Platform Length: 6,810 mm * Extension: 5,550 mm * Gooseneck Length: 3,600 mm * Rear Swing Door: 2,100 mm * Platform Thickness: 200 mm * Wheelbase: 10,530 mm * Axle Spacing: 1,360 mm * Unladen Weight: approx. 12,873 kg (±3%) * Gross Vehicle Weight (40 / 60 / 80 km/h): 42,000 kg * Total Axle Load: 24,000 kg * Perm. King Pin Load: 18,000 kg (40 / 60 / 80 km/h) ----Chassis & Axles 2 Axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional lifting of the driving level by 40 mm possible * Load gauge for axle load display * Semi-automatic tracking of steered axles with warning light sensor ----Brake System WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system in accordance with UN ECE R13 ----Electrics & Lighting 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket Bodpfxeynprws Acnsll * LED brake lights * LED rear and fog lights * Electrical system compliant with UN ECE R48 & ADR * LED work lights at rear (2 units, automatic reverse activation) * LED beacon (1 unit) ----Tires & Rims Tire size: 245/70 R17.5 * Tires: M+S * 3PMSF (winter suitable) * Tire pressure monitoring system in accordance with R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on gooseneck ----Steering & Operation Hydraulic steering for both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load indicator * Suspension control * Tire & brake wear monitoring * Breakdown & system monitoring ----Chassis & Frame High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallizing (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single ----Platform & Body 3 removable platforms with hardwood floor * Dimensions per platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * Per platform 2 × lashing rings with 8,000 kg tensile force * Platform extension: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized ----Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform * Stake pockets: * 6 × 2 units in pool (50 × 100 mm) * 3 × 2 units at rear (50 × 100 mm) ----Attachments & Accessories Aluminum front panel for gooseneck: 360 × 1,550 mm * Aluminum side panels: 360 × 1,900 mm * Aluminum rear panel: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73

Condition: used, Year of construction: 1995, operating hours: 9,000 h, functionality: fully functional, center height: 225 mm, grinding length: 1,600 mm, STUDER S40 CNC Universal Cylindrical Grinding Machine with Polygon Grinding Attachment For sale is a STUDER S40 CNC universal cylindrical grinding machine, manufactured in 1995, with a GE Fanuc Series 16-GC control system and a polygon grinding attachment. Blsdszw E Npepfx Acnsl The machine is equipped for various cylindrical grinding tasks and enables, among other things, face, plunge, internal, and cylindrical grinding. Additionally, the machine is equipped for polygon grinding. Technical Data Manufacturer: STUDER / Studer AG Model: S40 CNC Year of manufacture: 1995 Machine No.: 011.0166.60.028 Control system: GE Fanuc Series 16-GC Center distance: 1,600 mm Cross slide X: max. 275 mm Resolution: 0.0001 mm Maximum table swivel: 8.5° Equipment – Polygon grinding attachment – 2 grinding wheels plus 1 internal grinding unit, selectable via the control system – Face, plunge, internal, and cylindrical grinding – Automatic truing device – Steady rest – Magnetic chuck – Three-jaw chuck – Collets – Grinding between centers – Cycle control – DXF import – Grinding wheels in corundum, diamond, and CBN available – STUDER hand-held control unit The machine is in used condition with signs of wear and tear consistent with its age and use. An inspection is possible after prior arrangement. Price: €60,000 negotiable plus VAT. Location: 74343 Sachsenheim Collection/shipping by arrangement. Errors, changes, and prior sale reserved.

Condition: used, Manufacturer: WEINIG Type: UC6 Year of manufacture: 1997 Condition: untested Machine description/technical data WEINIG UNICONTROL6 window manufacturing system including Oertli tool set IV68 and IV77 wood + wood/aluminum (all cutting drawings available upon request) Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Manufacturing possibilities: Individual parts, double parts, frame-wise, series production, edge profiling Control of tool positions (longitudinal and transverse machining) via selector switch on the control panel Transverse machining: - electronic length stop for wood lengths up to 2,600 mm, with auxiliary stop for wood lengths up to 3,600 mm, with slot table that moves along and has separate control -Studio window setup: Swiveling length stop ± 60° with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for the production of angled parts Cut-off saw 3 kW Axial adjustment manually with mechanical digital display Laser guide for cut-off saw to detect the section Cut-off saw pneumatically controlled, mortise dimension adjustable via mechanical numerical display Mortise and slot spindle 11 kW (standard 7.5 kW) Tool clamping length: 320 mm Number of tools: 4 x 80 mm Axial adjustment: 240 mm Electronic spindle brake Longitudinal machining: 7 feed rollers in the infeed and 5 in the outfeed, high/low controlled for faster and shorter edge profiling process Synchronous spindle (vertical right) 7.5 kW Before the profiling spindle for splinter-free edge profiling Profiling spindle 11 kW (standard 7.5 kW) Number of tool positions: 4 x 80 mm, pneumatically controlled Axial adjustment: pneumatic Mechanical spindle brake Profile milling unit (horizontal above) 3 kW After the profiling spindle, radially controlled to 2 positions and axially controlled to 3 positions Mechanical spindle brake Profile milling unit (vertical right) at the end of the machine 3 kW Radially controlled to 2 positions and axially controlled to 3 positions Plunge automation: The plunging in/out at the beginning/end of the wood is controlled via 2 adjustable limit switches. Plunge tolerance ± 3 mm. Mechanical spindle brake Return conveyor to the operator including identification function for further processing Partial renewal of pneumatic hoses and extraction hoses in the machine required! Price in €: on request Bsdpfozx Smqjx Acnjll VAT: exclusive Availability & Location Location: Greater Freiburg area Available: promptly after dismantling Inspection: in operating condition / in operation Price in €: on request

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: - 0.75 L GDB bottle (height approx. 295 mm) Crate formats: Bledpfx Aeytphcscnsl - 12-bottle Pool N2 crate (400 × 266 × 333 mm) - 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: - Cross-flow crate transport - Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: - Length: 2,700 mm - Width: 1,400 mm - Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: - Danfoss frequency converter - Standard electrical configuration Additional equipment: - Cap transport system - Blower unit - Technical documentation available Condition: Used Availability: On request

Year of construction: 2000, condition: excellent (used), As-new lock copy milling machine for PVC and aluminium profiles from a training workshop Key features: - 3-sided machining of sash and frame profile bars in a single clamping, e.g. for profile cylinders, handle holes, and lock cases - Equipped with 4 tracing pins for flexible and simple use of the template system - Convenient insertion of the profile bar without interfering milling units - Manual profile bar rotation device for 3-sided machining - Optimum machining quality due to the design-based use of short tools Max. workpiece cross-section (W x H): 200 x 100 mm Milling area (L x W): 315 x 130 mm Plunge depth: 200 mm Speed: 12,000 rpm Drive power: 1.5 kW at 400 V Machine dimensions (L x W x H): 1260 x 820 x 1650 mm Machine weight: 340 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Bjdpfx Acoyrh Ncsnsll

Condition: new, neu ca. 6 Monate ab Auftragse Blodpfxozwqa Hj Acnel Taiwan 83670 € 1581.36 € 810 mm 610 mm 800 x 400 mm 800 x 400 mm 5 - 25 m/min 0 - 2.250 mm/min 450 mm 0 - 675 mm/min 480 mm 500 - 2200 1/min 3,75 (optional 5,5 / 7,5) kW 1.5 kW 3250 mm 3075 mm 2250 mm 2900 kg 175 kg 350 kg 355 x 50 x 127 mm 1,1 kW Fully enclosed splash guard 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list automatic vertical feed servo drive for grinding wheel feed and table cross feed heavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearings hardened and ground C2 grade ballscrew on crossfeed and elevation hardened slide ways electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation grinding wheel grinding wheel flange grinding wheel balancing stand LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONS (PRICES ON REQUEST): autom. dressing attachment mounted over the wheel version without fully enclosed splash guard

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours Bodpfx Aepumdcjcnsll *

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Bsdodqzcxepfx Acnell Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Bledpshp Rc Iefx Acnsl Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm Blodpjhp Rcysfx Acnel DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Aluminum fence cheek

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3649, Country of manufacture: Switzerland Voltage: 380 V / 50 Hz / 3 Phases Net weight: approx. 445 kg Dimensions: 730 x 780 x 1380 mm Customs tariff number: 8459.6130 TECHNICAL SPECIFICATIONS Maximum distance between stops: 80 mm Maximum cutting length: 50 mm Maximum cutting diameter (with 24 mm dia. cutter): 36 mm Maximum module: 1 Number of teeth cut – with 1:4 ratio: 6-100 with 1:10 ratio: 6-200 Total rapid approach and plunge travel: 8 mm Maximum axial movement travel of the cutter: 10 mm Maximum plunge cutting travel: 2.5 mm Maximum movement of counter-spindle quill: 25 mm Maximum distance between workpiece axis and cutter axis: 30 mm Maximum cutter diameter: 32 mm Quill body diameter: 35 mm Continuously adjustable slide feed rate: 0-60 mm/min Constant rapid return feed rate of the slide: 3 m/min 8 spindle speeds: 660–5300 rpm Horizontal tilt of the cutter head: approx. 4° Blsdpfx Acsw Uc Tbjnol Cutter motor power (2 speeds): 0.37/0.59 kW Hydraulic pump motor power: 0.24 kW Coolant pump motor power: 0.07 kW Hydraulic oil tank capacity: 13 l Cutting oil tank capacity: 10 l Quill oil tank capacity: 10 l All technical data provided without guarantee and subject to errors or omissions.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Bodpow U Ry Njfx Acnoll Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Dimensions 121 x 69 inches TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm Bledpfx Acjd Amifonel 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06.E.400.020, Manufacturing origin CH Voltage 3x400V - 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm TECHNICAL DATA Control Fanuc 21i-MB 3 axes U : work wheel axis W : workpiece / dressing axis X: drive wheel axis Through feed grinding Workpiece diameter Ø 1.5 - 50 mm Plunge grinding Workpiece diameter Ø 1.5 - 100 mm Grinding length max 270 mm Grinding wheel Max. external diameter Ø 400 mm Inner diameter Ø 203.2 mm Max. speed 50 m/sec. Drive power 11 kW Optional drive power 29 kW Regulating wheel Max. external diameter Ø 250 mm Inner diameter Ø 127 mm Speed 5 - 1'000 min-1 Tilting angle +5° / -5 Drive power 3.7 kW Positioning accuracy In all 3 axes 0,1 µm Resolution of glass scales 0.05 µm Dimensions Length 2060 mm Width, (with door open) 2370 mm (3120 mm) Height, (with door open) 1950 mm (2100 mm) Weight 5500 kg Compressed air Max. pressure 16 bar Air consumption 165 L/min Air consumption with straightening spindle 250 L/min Temperature +15° / +40° C. Bljdpfxsiqt S As Acnol errors and omissions excepted-data given without obligation

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Bodpfxow T Sd Ts Acnell Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.