Used Plate Warmer for sale (12,957)

Condition: used, Technical details: floor-plate length: 385 mm plate width: 205 mm Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing Bdodpfxju N D Hre Acysi T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg Bdedpsu Id Rujfx Acysi deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück Bjdpfx Ajvc Amtscyodi interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Technical details: floor-plate length: 3500 mm plate width: 1500 mm plate height: 345 mm weight of the machine ca.: 3,7 / pro Platte t transport dimensions LxWxH: ca. 3,5 x 1,5 x 0,35 / pro Platte m Es stehen 4 Aufspannplatten zum Verkauf. There are 4 clamping plates for sale. Manufacturer: MORA-Meuselwitzer Guss Material cast steel T-slot according to DIN 650: a=13.5; h=24; b=24.5; c=11mm one long side surface finely milled 2x plates are equipped with guide rails * Bedpoval Iujfx Acyedi

Condition: used, Technical details: Bjdou Icdyspfx Acysdi sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: used, Technical details: sheet width: 2300 mm plate thickness: 6 mm bending capacity max. - round: nicht bekannt mm Bdsdpfx Aceu Icd Teysi distance between columns: 3210 mm roll dia. top roll: Ø 190 mm side roll diameter: Ø 150 / 2 Stück mm dimension machine xH: 3,55 x 1,2 x 1,6 m weight of the machine ca.: 2,3 t total power requirement: 9 kW Steel frame double T beam welded top roller: with running; adjustment= length 150mm via hand toggle; support block can be folded out for opening side rollers: motor driven; adjustment=fixed *

Condition: used, Technical details: floor-plate length: 2500 mm plate width: 1250 mm plate height: 100 mm transport dimensions LxWxH: 2,53 x 1,25 x100 m Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Bdedpfx Acswm Ngtoyji Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 through-holes with D=17mm *

Condition: used, Technical details: floor-plate length: 3500 mm plate width: 2000 mm Bedpfxjval Eyj Acyodi plate height: 360 mm Plate thickness: 360 mm weight of the machine ca.: 4,9 / pro Platte t transport dimensions LxWxH: ca. 3,5 x 2,0 x 0,4 / pro Platte m There are 2 plates for sale. (price per plate) Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2 *

Condition: used, Technical details: floor-plate length: 1500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 1,1 / pro Platte t transport dimensions LxWxH: ca. 1,5 x 1,3 x 0,3 / pro Platte m There are 4x clamping plates for sale. Material cast steel T-slots according to DIN 650 Bsdsval Ihopfx Acyodi a=21.5; h=40; b=38.5; c=17mm Center distance 250mm *

Condition: used, Technical details: floor-plate length: 5500 mm plate width: 2150 mm plate height: 340 mm Plate thickness: 340 mm weight of the machine ca.: 9,0 t transport dimensions LxWxH: ca. 5,5 x 2,2 x 0,35 m Material cast steel Milled, finished surface T-slots according to DIN 650: Bdedpfxjval Nfs Acysi a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm *

Condition: used, Technical details: floor-plate length: 800 mm plate width: 455 mm plate height: 75 mm weight of the machine ca.: 264 kg transport dimensions LxWxH: 800 x 455 x 250 mm ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) Bodpfx Acju N Dhieysdi - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 16mm, pitch circle Ø 160mm - clamping slot diagonal according to DIN 650 ( a=19mm; h= 25mm; b= 38mm; c= 16mm - below with support plate = distance approx. 410mm *

Condition: used, Technical details: weight of the machine approx.: 18 kg kg Bdedeu N Dmxopfx Acysi dimensions L x W x H: Ø 200 x H: 100 m PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included) *

Condition: used, Technical details: floor-plate length: 1100 mm plate width: 700 mm Bsdpeu N Dyrsfx Acyodi plate height: 85 mm weight of the machine ca.: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm *

Condition: used, Technical details: Bsdpfx Aou Nkkkecyodi table length: 1000 mm table width: 1000 mm weight of the machine ca.: 0,531 t space requirements of the machine approx.: 1,0x1,0x0,8 m marking plate is on a robust welding construction 60mm steel angle. *

Condition: used, Technical details: floor-plate length: 660 mm floor plate width: 450 mm floor plate height: 70 mm passage opening in table: Ø 115 mm weight of the machine approx.: 111 kg space requirements of the machine approx.: 660x450x70 mm Bedpfsu Nkpysx Acyedi fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm *

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm Bdsdpfx Acsu N D Rdsysi weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: used, Technical details: Bdedpsu R A A Usfx Acyoi floor-plate length: 640 mm plate width: 330 mm Plate thickness: 65 mm

Condition: used, Technical details: lapping tool diameter: Ø 1000 mm material thickness: Auftrag ca. 8,0 mm Plate thickness: ca. 75 mm internal diameter: 400 mm Weight approx.: 0,37 t dimensions: 1,2 x 1,2 x 0,3 mm Bjdpfxsu Uzzue Acyodi boring diameter: Ø 290 mm Flange mounting: Ø 320 mm This work wheel can be used, for example, on a disk sanding, fine sanding and/or lapping machine. Application: Material removal for “gentle” processing of the workpiece surface, as well as keeping the tools flat The pattern (honeycomb) improves stock removal due to the additional cutting edges. This results in a good surface finish and evenness. Diamond and CBN lapping wheel/lapping plate Die Mittenbohrung Ø 290 mm weist eine Senkung mit Bohrung Ø 400 mm x 47 mm Tiefe auf. Verpackt in Holzkiste 11500 x1150 x 166 mm. *

Condition: used, Technical details: floor-plate length: 3000 mm plate width: 1775 mm plate height: 350 mm Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longitudinal side and on the front side. Bsdpfxeu N Dglo Acyjdi *

Condition: used, Year of construction: 1999, Technical details: floor-plate length: 5500 mm plate width: 1500 mm plate height: 250 mm weight of the machine ca.: 6,5 t Bdsdju N Dnvspfx Acyei space requirements of the machine approx.: 5,5x1,5 m - distance of T-slots = 542 / 500mm in a parallel offset order - T-slot according DIN 650 - a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm - incl. adjustment screws and covering caps i.D. *

Condition: used, Year of construction: 1979, Technical details: floor-plate length: 6400 mm plate width: 1870 mm plate height: 415 mm weight of the machine ca.: 8600 kg transport dimensions LxWxH: 6,4 x 1,9 x 0,42 m Very high quality (no damage) Steel Plate - T-groove DIN 650 Bsdsu N Dqdepfx Acysdi - a=36; h=69; b=59; c=25mm; Groove distance= 315mm - included: 26 cover plates Ø 147 x 3mm *

Condition: used, Year of construction: 1974, Technical details: voltage: 220 V clamping surface area: 630 x 210 mm current: 0,55 A weight of the machine approx.: 84 kg dimensions L x W x H: 0,63 x 0,270 x 0,10 m Magnetic clamping plate Bsdpfxeu N D Ntj Acyjdi 120 watts 13x induction loops, width 20mm spacing 43mm *

Condition: used, Technical details: Length: 400 mm width: 200 mm weight of the machine approx.: 24 kg dimensions L x W x H: 0,4 x 0,22 x 0,08 m MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm) Bsdpfxou Nklhs Acysdi *

Condition: used, Technical details: floor-plate length: 1100 mm plate width: 800 mm plate height: 100 mm number of T-slots: 3 Stück distance between Columns: 300 mm weight of the machine approx.: 650 kg T-Slots according to DIN 650 und 508 - width a:30mm - width b:50mm Bdedpfxsu Nklue Acyji - height c:30mm - height h:50mm *

Condition: used, Technical details: Bjdpfx Asu Nkrnjcyjdi length: 640 mm width: 465 mm thickness of clamping plate: 90 mm weight of the machine approx.: 70 kg