Used Plate Baking Oven for sale (13,496)

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T Pgjdpfx Aewlhfloh Hsg

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Pgjdsw Hhwwspfx Ah Heg Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: good (used), Year of construction: 1990, overall weight: 1,200 kg, Faceplate, Werner Gigant, Type: PL 1600 - Cast Iron, Without Jaws Diameter 1600 mm with transport frame. Weight approx. 1200 kg. See photos for details. Pgsdpfxswaidfe Ah Hog Good condition.

Condition: new, Year of construction: 2026, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Pgsdstqfhxopfx Ah Hsg Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: used, Type Combi 12110 TF continuous grilling line all stainless steel bottom contact grilling + hot air Psdpfx Ahsydk Hus Hjgg suitable for steam injection belt width 1.100 mm net length 11.000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : ± 13.500 x 1.700 x 2.400 mm independent platen – air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (± 600 kW) with belt wash system

Condition: used, continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) belt width ± 600 mm electrically heated Psdpfxsydk E Do Ah Hjgg power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm Pedpsydk D Hofx Ah Hjgg The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: used, functionality: fully functional, Year of construction: 1998, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 380 mm, side roll diameter: 340 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 15,000 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,600 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, Plate roll FW model HAV 3100X16-30 variable geometry 3-roll plate bending machine capacity 3000 x 30 mm Year of make 1998 Used machine in working condition Top roll 380 mm Side rolls 340 mm Rolls surface length 3100 mm Capacity bending Plate width 3000 mm Plate thickness 30 mm Psdpfx Asydiq Sjh Hsgg Prebend 16 mm minimum rolling diameter starting from ID 450 mm and above -configuration -machine fully hydraulic operated -variable geometry of the 3 rolls with pinch prebend -hardened surface of the 3 rolls Rerolling system for calibration of welded plates Front open drop-end to unload the closed shell -Side arm hydraulic swing-down to align the plate in the rolls -hydraulic driven rotation of the upper roll with braking system Control console centralized electric with digital position readout Electric motor power 22Kw installed on hydraulic unit Voltage 3 phase 380/50 Safety and emergency stop installed Manuals operation and service original the machine Machine weight 15ton overall dimension cm 550 x 150 x H160 cm

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: Pgodsxizb Ejpfx Ah Hjg • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: new, Year of construction: 2024, neu 2024 9722 prompt, Zwischenverkauf v Türkei 16600 € 318.72 € 1 2050 mm 3 mm 130 mm 3,5 m/min 2.2 kW 3200 mm 750 mm 1000 mm 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN Pjdpfx Ahswiqpbj Hsgg OPTIONS: (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: used, Used Sondex model SF229-IS stainless steel plate heat exchanger. Transmission surface approximately 360 m2. Hot side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Cold side is rated min/max allowable pressure -1/10 bar at min/max allowable temperature -20/165°C. Pgsdpfsyc Tqmsx Ah Hjg

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, This is a combi-steamer from the SCC 101 WE Baking Line series by premium manufacturer Rational, including a matching UltraVent condensation hood and base stand (for 8 x 400 x 600 mm baking trays). This is the latest SCC model range, featuring triple-glazed doors and LED lighting, manufactured in 2018. The entire combi-steamer system has been completely overhauled in our in-house workshop and all units are fully functional. This combi-steamer comes with a left-hinged door. The Baking Line software includes a wide range of pictograms for various baked goods. This combi-steamer offers intelligent baking processes for savoury products, delivering the desired result every time. A VAT invoice will be issued. Service: We are happy to help you arrange for a certified Rational customer service technician. Our used equipment service for you: - 6-month warranty on electrical parts, limited to replacement of defective components (no labour or installation costs included) - High-quality branded equipment at fair prices - Professional overhaul, inspection & expert cleaning - Tested & fully operational – or your money back - Flexible shipping or collection options - Competent advice before and after your purchase - Provision of operating manuals, wiring diagrams & spare parts - Safety inspection according to DGUV V3 Technical data – combi-steamer: - Dimensions (W x D x H): approx. 847 x 776 x 1042 mm - Power supply: 400 V / 18.6 kW / 50-60 Hz - Capacity: 8 racks for 400 x 600 mm trays - Weight: approx. 135 kg - Serial number: E11SI18012641992 - Year of manufacture: 2018 Technical data – hood: - Dimensions (W x H x D): approx. 854 x 1226 x 450 mm - Power supply: 230 V / 50-60 Hz - Serial number: DT1UE18015023257 - Year of manufacture: 2018 Base stand: - Model: UG II back - Dimensions (W x D x H): 843 x 732 x 671 mm - 10 pairs of support rails for 400 x 600 mm - Closed side panels and top, open at the rear - Serial number: 60.30.836 Condition: Used, completely overhauled, fully functional Additional information: - The combi-steamer mode offers 3 operating modes: steam (30°C to 130°C), convection/hot air (30°C to 300°C), and combination (30°C to 300°C) - Care Control self-cleaning system - Core temperature probe - Hand shower with automatic recoil - 8.5" colour display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free grease separator - Automatic pre-set start time - 7 cleaning programs for unattended cleaning—including overnight - Programmable steam injection in 3 stages (30°C to 260°C) - 5 programmable proofing stages - USB interface - Seamless, hygienic, trough-shaped cooking chamber with rounded corners - Halogen interior lighting Subject to change and errors. Do you have questions, need advice or would like to view the unit in person? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Pgsdpfx Ajyc Tn Sjh Hjg Sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, length 400 mm width 270 mm Podpfsd Iha Rjx Ah Hogg weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4x0,27x0,03 m

Condition: used, table length 1000 mm table width 660 mm table height 870 mm total power requirement kW Pgsdpfxou Sbf Do Ah Hog weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 2014, length 1200 mm Pgsdpfx Aov Ig Aceh Hsg width 800 mm Thickness 160 mm

Condition: used, floor-plate length 1050 mm floor-plate width 1050 mm floor-plate height 60 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 1050x1050x0,1 m Pgedsu Sbfkopfx Ah Heg table plate of PFSU 1600, Ø 1050 mm

Condition: excellent (used), Memmert Model: Memmert UF750plus Description: For sale is a Memmert UF750plus universal cabinet/drying oven in a high-quality industrial design. This unit is ideally suited for drying, heating, tempering, aging, burn-in, curing, and testing of materials in laboratories, industry, research, and quality assurance. Equipped with the Memmert ControlCOCKPIT TwinDISPLAY control system, the chamber offers precise temperature regulation up to 300 °C, uniform air circulation, and comprehensive safety and alarm functions. The entire interior is made of stainless steel, easy to clean, and engineered for heavy-duty use. The unit is mobile, robust, and designed for continuous professional operation. Technical data (UF750plus) General Manufacturer: Memmert Model: UF750plus Type: Universal drying oven Internal volume: approx. 749 liters Max. temperature: +300 °C Temperature range: +20 °C to +300 °C (at least 10 °C above ambient temperature) Controls & Technology ControlCOCKPIT TwinDISPLAY (2 TFT color displays) PID microprocessor control 2× Pt100 temperature sensors (DIN class A) Timer: 1 minute to 99 days Pgedpfxeyc Swxj Ah Heg Electronically controlled forced-air circulation Electronically adjustable exhaust flap Ethernet & USB interface (AtmoCONTROL) Multi-level safety monitoring (TWW / TWB / AutoSAFETY) Electrical data Connection: 400 V three-phase (3×230 V + N + PE) Frequency: 50/60 Hz Power consumption: approx. 7 kW Rated current: approx. 10.1 A Dimensions External dimensions (W × H × D): 1224 × 1720 × 784 mm Internal dimensions (W × H × D): 1040 × 1200 × 600 mm Shelves: up to 14, 4 wire shelves included Load capacity: per shelf: 30 kg total: 300 kg Weight Net weight: approx. 217 kg Gross weight (with packaging): approx. 288 kg Other features Stainless steel internal chamber Mobile on castors (lockable) Made in Germany Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors! Data subject to change.) For further questions, please call us.

Condition: used, Year of construction: 2001, - Year of manufacture: 2001 Specifications Pgodoxa Aclspfx Ah Heg - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Strokes per minute: 10 - Oil tank: 410 l - Motor power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Main fuse rated current: 100 A - Dimensions (W x H x D): 3750 x 2400 x 3425 mm - Weight: 13800 kg

Condition: used, continuous grilling line all stainless steel bottom contact grilling + top hot air suitable for steam injection useful width conveyor 900 mm belt width 1.000 mm net length 4.750 mm electrically heated 276 kW underplate max. 260°C Pgodpfsyc Skfex Ah Hjg air temperature max. 280°C belt washing system/hot water ± 60°C (operational supply) adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm new Teflon belt

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Pgedov Syyvspfx Ah Hsg Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, Year of construction: 1993, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, cutting length (max.): 3,050 mm, motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Podpfxev Tk Efe Ah Hogg Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Pjdpfxehtq N Nj Ah Hsgg Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conische buiging met geharde rollen met gemotoriseerde backroll Number of rolls: 3x Podsxzvp Uopfx Ah Hogg Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie. Number of rolls: 4 Pjdex Enfxspfx Ah Hsgg Roll capacity cold: 3100 x 20 mm Roll dia upside: 370 mm Pre-bending: Yes

Condition: new, Year of construction: 2025, neu 2025 090120 prompt, Zwischenverkauf v Türkei 7100 € 137.03 € 1 1 Pgsdpfx Ahowira Ie Heg 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN