Used Plastic Injection Press for sale (18,971)

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Kljdpjwq Dpqjfx Ah Nsl Maximum pressing force: 800 kN Stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts, but the control does not respond to commands. The previous user replaced the original AMADA control with a DELEM unit.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Klodjx Irw Rjpfx Ah Njl Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: good (used), functionality: fully functional, Year of construction: 2010, 2-axis: Programmable X, R axis Bending length: 2100 mm Max. force: 40 t Max. opening between beams: 615 mm Max. stroke: 200 mm Approach speed: 140 mm/s Working speed: 0 – 10 mm/s Stroke speed: 140 mm/s Dwell: 6 mm Dimensions (LxWxH): 2900 x 1900 x 3050 mm Kedeya Dggspfx Ah Nell Weight: approx. 5200 kg The machine can be inspected under power at any time.

Condition: good (used), Year of construction: 1952, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Protrusion: 180 mm Kledpeb A Hwhsfx Ah Nel

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Ksdjyazdijpfx Ah Nell Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: good (used), Year of construction: 1983, functionality: fully functional, Pneumatic frame press, 4 vertical cylinders, 2 horizontal cylinders, cylinder stroke 110 mm, vertical pressing force 1100 kPa at 15 bar, horizontal 700 kPa at 15 bar, dimensions 3700 x 1850 mm, pressing/installation dimensions 4370 x 2330 x 730 mm, in good condition. Price ex-location. Transport available at extra cost! Kodpfxjyaywuo Ah Nell

Year of construction: 2025, condition: new, functionality: fully functional, COLUMBUS 360° - MOVE | Mobile vacuum press 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts). Klsdpfsyax Aiex Ah Nsl MOVE — the high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. With extensive flexibility, due to absolute mobility and revolutionary folding mechanism, to reduce the floor space to 45 % when folded. Technology: Membrane fast-change system Gas springs for flap opening Highly elastic natural rubber membrane (up to +130 °C) Stable phenolic resin worktop (up to +120 °C), glued 15 times 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER optional, automatic switch-off when pressure is reached (with large vacuum volume) Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge Connection for external vacuum bag Feet including smooth-running swivel castors FESTO pneumatics and SIEMENS electrics Technical data and dimensions: Usable area: approx. 3050 x 1350 mm Dimensions inside the frame: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1770 mm Electrical connection: 1~, 0,8/1,0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT.

Year of construction: 2025, condition: new, COLUMBUS 360° - PIONEER Kjdpfjyaxy Uox Ah Nsll 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts), a high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT. The modular design allows the machine to be adapted to current needs. Available in 3 sizes from stock.

Year of construction: 2025, condition: new, COLUMBUS 360° - PIONEER BASIC | Vacuum press | Size L 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts), a high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. Technology: Membrane fast-change system Gas springs for flap opening Highly elastic natural rubber membrane (up to +130 °C) Stable phenolic resin worktop (up to +120 °C), glued 15 times 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER optional, automatic switch-off when pressure is reached (with large vacuum volume) Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge Connection for external vacuum bag Feet including smooth-running swivel castors FESTO pneumatics and SIEMENS electrics Electrical connection: 3~, 1,25 kW, 190-255/330-440 VAC, 50 Hz (3~, 1,5 kW, 190-290/330-500 VAC, 60 Hz) Kjdpfx Ajyaxybeh Nell Dimensions: Usable area: approx. 3050 x 1350 mm Dimensions inside the frame: approx. 3130 x 1430 mm Max. workpiece height: approx. 600 mm Overall dimensions: approx. 3700 x 1640 x 1080 mm Weight: approx. 680 kg 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT.

Year of construction: 2026, condition: new, INFINITY - the vacuum press system in special lengths The Columbus INFINITY is the new and groundbreaking vacuum press system that can be constructed in the length desired by the user on request. The specially created and eponymous Infinity Principle, according to which the usable area in terms of length can be increased very cost-effectively almost to infinity, is used in each individual component. The system offers both maximum flexibility and maximum efficiency, because where the Infinity Vacuum Table and the Rolling Membrane System offer infinity, the Multi-Zone Suction guarantees maximum control. Thanks to this Multi-Zone Suction, only that section of the usable area that is currently in use is vacuumized. Kodjyaxw Hspfx Ah Nell INFINITY is perfect for all users who value an infinite usable area for a wide variety of special pressing with maximum yield volume. Directly from the manufacturer - including warranty! Execution: Length and width on customer request! Table base made of stable, welded metal construction, adjustable table feet. The table material is a 21 mm thick birch plywood board. An approx. 15 mm wide vacuum suction groove is milled on the table surface to seal the membrane. The membrane is wound onto a reel and is manually unrolled onto the table surface using a very smooth-running linear slide. The cavities of the table frame serve as vacuum buffer storage. The vacuum pump has an output of 80 m³/hour. The table surface has several suction grooves, these are divided into 5 suction zones. The table load is about 200 kg / m

Condition: ready for operation (used), load capacity: 32,000 kg, Type PEn 32/280 90 str/min Klodpfx Ahoyauhno Nol Max adjustable stroke: 8 - 100 mm Electric motor (power): 2,7 hp

Condition: excellent (used), Year of construction: 2012, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Drehteller Hersteller: KRAUSS MAFFEI Typ: KM110-180-55 CX V Baujahr: 2012 Schließkraft: 120 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 22 mm Schnecken DN 2: 18 mm Klodpeyat S Sefx Ah Njl Steuerung: MC 5 Ausstattung: Drehteller Antrieb elektrisch 2 x Kernzüge Bewegliche Platte 1 x Kernzug Feste Platte

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles Klsdpfx Ahsyath Tj Nel - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm Kedshlnzkopfx Ah Noll column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 2002, Total counter: approx. 26.58 million impressions (see photo) RYOBI-matic film dampening system RYOBI Semi-PRC semi-automatic plate changer RYOBI PCS-J control console Ksdpsyatc Djfx Ah Noll GRAFIX powder sprayer Max. paper size: 520 x 375 mm Min. paper size: 100 x 105 mm (with additional equipment) Printing speed: up to 11,000 sheets/h Paper thickness: 0.04 to 0.4 mm (up to 0.5 mm possible with narrow web)

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations) Kledpfsxa Ephox Ah Nsl

Condition: excellent (used), functionality: fully functional, CATALOG NUMBER 7558 TECHNICAL DATA Kledpfjyarabjx Ah Nsl - Loading areas: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 3300 mm - Max height of glued elements: 1020 mm - Max thickness of glued elements: 100 mm - Dimensions (L/W/H): 4270x1600x2000 mm - Weight: approx. 800 kg ADVANTAGES – Two working zones – Gluing length: 3300 mm – Pneumatic cylinders – Used press, very good condition Net price: 10,900 PLN Net price: 2,600 EUR based on exchange rate 4.2 EUR (Prices may vary depending on significant fluctuations)

Condition: used, With this offer, you are purchasing a used colour production system from the current new series ‘Fujifilm Jet Press 750S’. Item for sale: 1 x Fujifilm Jet Press 750S with the following equipment: Includes Gemini Z1.0 print heads Includes in-line sensor Includes XMF Complete WorkFlow software Includes XMF ColorPath Includes JPF Kit/Tape Inserter Includes Dell JP750S Server Rack Power Edge 330 The machine is under full maintenance and in working order. The meter reading may therefore vary. Meter readings: Kodpfxsyaq Uks Ah Nell Total: approx. 9,834,557 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 2010, Press force: max. 1200 kN; Stroke: max. 52 mm; Dimensions (W x L x H): 4610 x 3910 x 2665 mm; Total weight (net): approx. 7000 kg Kledpfjyaqgaex Ah Njl

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding. Ksdjyaqmgspfx Ah Nell

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Ksdpfx Asyapdqsh Noll Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: used, Year of construction: 1998, pressure 3500 t stroke 900 mm Distance table / ram, stroke down 1000 mm distance table / ram, stroke up 1900 mm table surface area 3150 x 2150 mm ram surface 3150 x 2150 mm Total Weight of Tool max. 30,0 t Weight of Tool Top Part max. 20,0 t speed down 400 mm/s working speed 0,9 - 9,2 mm/s Klsdovuukhopfx Ah Nol Hydraulic Operating Pressure 280 bar oil volume 5500 l rated current 760 A voltage 400 V frequency 50 Hz power requirement 425 kW weight 231,0 t Hydroformpress / IHU-Press maximum preforming force approx. 1000 t Total tool weight approx. 30 t upper tool weight approx. 20 t · Die function interface: 4 controlled axis, 3 b/w functions slide, 4 b/w functions bed · Parallelism control: over the length side of the press · Light curtain: front and back side · Light barrier: left and right side · Slide locking: TDC-Position · Two-hand control panel: 1 · Independent high pressure circles water hydraulic system: 2 · Max. working pressure: 3.000 bar · Displaced volume of each Intensifier: 3,74l · 2 Filling pumps: volume and pressure depending the power grid · Location of pressure intensifier: to be determined · Main pumps: located on the press crown/oil tank · One die change table: 6,7 x 2,15 m · Max. die size: 3,15 x 2,15 m · Clamps on slide: Hydraulic · Clamps on the bed: Mechanical · Electrical control: Schuler Multiview HF Attention: This machine is a EU re-import! If the machine is to be installed and operated in the EU, it must be adapted to the currently valid EU directives of the country of installation before it is put into operation This work is not part of the offered price as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min throat 460 mm passage to the back 590 mm dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m Kjdjvuun Topfx Ah Nsll permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Kedpfovuul Esx Ah Nell Table surface area 1200 x 1500 mm Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Ram surface 1200 x 1500 mm Weight 16,0 t Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm Ksdovut Hnjpfx Ah Noll stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available