Used Plastic Injection Molding Machine for sale (93,286)

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, total height: 2,300 mm, total width: 1,291 mm, total length: 4,083 mm, screw diameter: 2,522 mm, clamping force: 1,300 kN, injection pressure: 2,400 bar, overall weight: 10,600 kg, We once again have some excellent cleanroom machines in our range. Here, we are offering this Engel 2-component cleanroom machine from 2006. The machine comes complete with a GEKU SR 500 ST. Additional accessories include a safety cage and a turntable, all part of the package. The machine has run just 33,107 cycles in automatic mode. The machine comes from a reputable pharmaceutical manufacturer, so both the machine and its handling system were maintained under a very strict maintenance regime and are in first-class condition for their age. Even the paintwork shows hardly any signs of wear. I am happy to provide you with further data and a quotation upon request. Best regards, Nick Schönfeld Machinery Trading Kjdpfsxd H A Rsx Afiodu

Condition: used, Year of construction: 2001, operating hours: 57,430 h, functionality: fully functional, machine/vehicle number: 183899, clamping force: 600 kN, overall weight: 2,330 kg, Arburg injection moulding machine for sale Year of manufacture: 2001 Condition: Very well maintained, regularly and promptly serviced Inspection: Was in operation until recently, currently still connected to power and available for on-site inspection at any time Kedpfx Afsxdz I Uoijdu Ready for use: Immediately available and fully functional The machine is in very good condition and is ready for immediate use. The machine is sold without tooling and conveyor. More details on request.

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Kdedpfovl Skaex Afiju Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: used, Year of construction: 2010, Used Injection Molding Machine SIPA PP2 72 year 2010 The SIPA PP2 72 injection molding machine from 2010, currently operating until April 2025, provides an efficient and precise solution for producing PET preforms. As a result, the system ensures high performance in the bottling industry, thanks to its advanced technical setup and specialized components. This Used Injection Molding Machine base features the PPS 72 model, equipped with a rotary robot dedicated to optimal preform cooling. Specifically, this integrated cooling system maintains consistent dimensional quality, shortens cycle times, and ensures high production volumes without compromising technical specifications. Moreover, in this Used Injection Molding Machine, the preform discharge conveyor alternates between two octabins, optimizing space and minimizing material handling times. Hot Runner and Customized Cold Half Plate of this Used Injection Molding Machine In the Used Injection Molding Machine SIPA PP2 72 year 2010, the 72-cavity hot runner maximizes productivity and ensures uniform plastic flow distribution. The system includes a complete cold half, consisting of: The core plate, which ensures proper preform shaping. The lip plate, which delivers precision and flexibility during the injection process. Kodpfx Ajv Ai I Refijdu The cavity plate, customized to produce a wide range of preforms according to customer requirements. In addition, this setup allows quick modifications and minimizes downtime, increasing overall system efficiency. Consequently, operators can achieve high production rates while ensuring adaptability to various production needs. PET Dryer and Environmental Control The DP820P HT dryer, manufactured by Plastic Systems, and equipped with a H6000 hopper, handles PET drying. Importantly, this dryer, installed in 2010, dehumidifies the plastic material, ensuring proper preparation before the injection process. Indeed, controlling the PET’s moisture content is essential to prevent structural defects and achieve high mechanical properties in the preforms. At the same time, the Eisbar DAS – E23 air conditioning unit, also from 2010, manages the cabin’s environmental conditions by regulating temperature and humidity. Therefore, this system ensures stable conditions and prevents variations that could compromise the quality of the final product. Similarly, it contributes to overall operational stability by reducing potential production inconsistencies. Mezzanine for Optimal Component Arrangement The system includes a mezzanine that houses the dryer and cabin air conditioner. As a result, this platform provides an ergonomic and organized layout of the various components, simplifying both routine and extraordinary maintenance while freeing up floor space in the production area. Furthermore, this arrangement enhances safety by reducing equipment-related congestion on the production floor.

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Injection moulding machine with extensive additional equipment – from cleanroom production For sale is a very well-maintained injection moulding machine with numerous additional features. The machine comes from a cleanroom production environment and was exclusively operated with PP material – accordingly, the screw is in an almost as-new condition. Highlights: - Extensive special equipment - Used exclusively with PP - Very clean condition – excellently maintained I purchase all machines and peripheral devices directly from customers at a fair price. The subsequent resale price is calculated appropriately so that all three parties – seller, buyer, and myself as intermediary – make a small, fair deal. Unreliable offers from various used machinery dealers are therefore not welcome. Kjdpfx Ajwb Dl Tjfiedu

Year of construction: 2008, condition: good (used), For sale is a Krauss Maffei brand injection molding machine type KM 110-380 The machine is in a good to very good condition, all maintenance and inspections have been performed Technical data: Year of manufacture 2008 Extended tie bars Pneumatic valve gate 2X Hydraulic core puller 31000 operating hours Cylinder D35mm Mould closing force: kN 1100 Mold opening force: kN 70 Euromap63 interface for version > 1-04-09 Nitrogen battery present Included component Wedge shoes with bolts and nuts Double bit wrench Kdjdpsibyatsfx Afisu Declaration of conformity cpl switchboard Certificate USB memory stick Ejector coupling-mechanical Enclosed in the control cabinet All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 2017, Type BOY 55A Pro #59638 Year of construction 2017 Operating hours ± 8,000 hours Screw diameter 38 mm Maximum injection pressure 1,508 bar Kdodpfsxa Aw Asx Afisu Maximum shot volume 136.1 cm³ Clamping force 55 t Maximum distance between tie bars 360 x 335 mm Minimum mould height 250 mm Maximum distance between plates 650 mm Dimensions 2,700 x 1,100 x 1,700 mm (L x W x H) Weight 2,350 kg Options • Procan ALPHA (1) display • Pneumatic integrated sprue picker • 6-way electrical distribution box • Single air program ✅

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm Kdjdpfx Ajlc R Rxofisu injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit pressure regulation. MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle Nozzle radius: 25 mm Nozzle opening: 9 mm Technical data (standard version) Clamping unit Clamping force: 6500 kN Opening force: 455 kN Platen dimensions (H x V): 1660 x 1530 mm Tie bar spacing (H x V): 1200 x 1020 mm Clamping stroke: 1450 mm Mould height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force forward/reverse: 140 / 70 kN Injection unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection flow rate: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing capacity (standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic system Pump motor power: 97 kW Installed heater power: 54 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 3.3 s / 840 mm Dry cycle time (KM standard): 2.9 s / 600 mm Oil tank capacity: 1435 liters Linear robot – Krauss-Maffei LRX 250 Payload capacity < 25 kg (gripper + drives + parts) Part removal on the operator-offside Axes: X axis (from mould): 900 mm, servo motor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servo motor Z axis (transversal): 2500 mm, servo motor Dimensions and weight Net weight (incl. control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m Kdodpfx Afjxdd U Djiou

Condition: good (used), Year of construction: 2014, operating hours: 29,646 h, clamping force: 900 kN, screw diameter: 100 mm, injection weight: 3,691 g, opening stroke: 1,120 mm, We are offering a HAITIAN MA 9000 injection molding machine in excellent condition, ideal for high-volume plastic production. This machine has been carefully maintained and has very low operating hours ( Kdedpsxc U Hzefx Afiju

Condition: like new (used), Year of construction: 2012, operating hours: 40,600 h, 1,0 St. gebr. Spritzgießmaschine mit Palettenwechseler Hersteller: KRAUSS MAFFEI Typ: KM80-380 AX Baujahr: 2012 Schließkraft: 80 Tonnen Holmabstand 480 x 410 mm Einbauhöhe min.: 180 mm Öffnungsweg: 550 mm Schnecken DN: 35 mm Kedpfx Asxac Ibefiedu Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 140 g/PS Steuerung: MC5 Ausstattung: Palettenwechseler Schnittstelle Temperiergerät Verschleißarme Plastifizierung Ca. 40.600 Betriebsstunden

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Kdjdsxc Eqqjpfx Afieu Screw: 45mm Core pulls: 1x Hot runner: 6x incl. conveyor belt

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 Kdsdpfx Afexcw T Rjiju - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Kjdpfxew T S T Ue Afiedu Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: new, Year of construction: 2025, Injection Molding Machine – Krauss Maffei KM 500-4300 GX Year of manufacture: 2025 Kdjdpfjxdd S Njx Afieu Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit control. MC6 control system based on an industrial computer using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display. Plasticizing Unit Complete plasticizing unit for thermoplastics, screw diameter 90 mm, with non-return valve and open nozzle. Nozzle radius: 15 mm Nozzle opening: 6 mm Technical data (standard version) Clamping Unit Clamping force: 5,000 kN Opening force: 350 kN Platen dimensions (H x V): 1430 x 1350 mm Tie bar spacing (H x V): 1040 x 910 mm Opening stroke: 1350 mm Mold height (min.–max.): 400–950 mm Daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 49 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20.0 Injection pressure: 1,839 bar Shot volume: 2,290 cm³ Shot weight (PS): 2,084 g Injection speed: 100 mm/s Injection flow rate: 636 cm³/s Screw speed (standard): 195 rpm Plasticizing capacity (at standard screw speed): 134 g/s Nozzle contact force: 129 kN Electro-hydraulic system Pump motor power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Dry cycle time (according to Euromap 6): 2.8 s / 728 mm Dry cycle time (according to KM standard): 2.5 s / 520 mm Hydraulic oil quantity: 1,180 l Linear Robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Parts placement on the operator-opposite side Axes: X-axis (from mold): 900 mm, servomotor Y-axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z-axis (crosswise): 2,500 mm, servomotor Dimensions and weight Net weight (with control cabinet): 25.0 t Machine dimensions (L x W x H): 8.08 x 2.80 x 2.39 m

Condition: used, Year of construction: 1985, operating hours: 96,000 h, functionality: fully functional, machine/vehicle number: 134522, Equipment: CE marking, The machine is surplus and may be sold, operational and disconnected. Kdsdpfx Afjxcakfsiju

Condition: excellent (used), Year of construction: 2001, operating hours: 23,400 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ARBURG Typ: 420C1000-250 Baujahr: 2001 Schließkraft: 100 Tonnen Kdjdpfx Afow U Ebboisu Holmabstand 420 x 420 mm Schnecken DN: 40 mm Dosiervolumen: 188 ccm³ Spritzteilgewicht 172 g/PS Steuerung: SELGOCIA Ausstattung: -Angußpicker, Hersteller: GEIGER

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Kdedpfx Aet Dxqtofiou Incl. robot (ASS) Production in clean room.

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer utilizing real-time Ethernet technology, equipped with a built-in 21.5" operator panel with a full-colour touchscreen. Plasticising unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle orifice: 6 mm Technical data (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Ksdsxdd Spepfx Afiedu Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Ejector force front/back: 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heating capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Hydraulic oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part removal to the operator’s opposite side Axes: X-axis (from mould): 900 mm, servomotor Y-axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z-axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Condition: like new (used), Year of construction: 2022, operating hours: 11,500 h, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ZHAFIR Typ: ZE2300III Baujahr: 2022 Kdedpfx Aow U Dtiefiou Schließkraft: 230 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 220 mm / 600 mm Öffnungsweg: 1.150 mm Schnecken DN 1: 55 mm Max. Hubvolumen: 570 cm³ Spritzteilgewicht in PS: 518 g Ausstattung: -Roboter -Kasakensteuerung -1 x Kernzug -Förderband -Schutzzaun Die Maschine wird ohne sonstige abgebildete Peripherie verkauft.

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Auger diameter: 50 mm Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Kjdpfx Afst Dx Hbsiedu Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: new, Year of construction: 2025, Injection Moulding Machine – Krauss Maffei KM 160-750 CX Year of manufacture: 2025 Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with colour touchscreen display. Plasticising Unit Complete plasticising unit for thermoplastics, screw diameter 50 mm, with check valve and open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical data (standard version) Clamping Unit Clamping force: 1,600 kN Opening force: 86 kN Platen dimensions (H x V): 820 x 845 mm Tie bar spacing (H x V): 520 x 520 mm Opening stroke: 650 mm Minimum mould height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force front/rear: 23 / 10 kN Injection Unit Screw diameter: 50 mm L/D ratio: 20.2 Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Injection speed: 90 mm/s Injection rate (standard): 177 cm³/s Screw speed (standard): 265 rpm Electro-hydraulic System Pump motor power: 22 kW Installed heater power: 15.5 kW Dry cycle time according to Euromap 6: 2.1 s Oil tank capacity: 400 l Linear Robot – Krauss-Maffei LRX 100 Payload < 10 kg (gripper + drives + parts) Part removal on operator-offside Axes: X-axis (from mould): 620 mm, servomotor Y-axis (vertical, with brake): 1,200 mm, servomotor Z-axis (crosswise): 1,500 mm, servomotor Dimensions and Weight Net weight (with control cabinet): 6.10 t Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m Kdjdpfxoxdd N Uj Afiou

Condition: like new (used), Year of construction: 2012, operating hours: 12,500 h, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: KRAUSS MAFFEI Typ: KM80-380 CX Baujahr: 2012 Schließkraft: 80 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min.: 180 mm Öffnungsweg: 500 mm Kedpfx Afew T S E Deiedu Schnecken DN: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 140 g/PS Steuerung: MC5 Ausstattung: Roboter Krauss Maffei, Baujahr: 2012 Schnittstelle Temperiergerät Verschleißarme Plastifizierung 1 St. Kernzug 1 St. Förderband Sicherheitszaun Ca. 12.500 Betriebsstunden

Condition: good (used), Year of construction: 1999, Krauss Maffei KM 1000-14700 CM Injection Moulding Machine Year of manufacture - 1999 Control system - MC3F TECHNICAL DATA Clamping unit: - Clamping force: kN 10,000 - Dimensions of mounting plates: mm 2000 x 1700 - Distance between columns (h x v): mm 1400 x 1120 - Maximum mould opening distance: mm 1700 - Min/max mould installation height: mm 700/1200 - Movable platen opening stroke: mm 2400 - Ejector stroke: mm 250 - Ejector force: kN 226 (reverse: kN 59) - Centring ring: 250mm - Nozzle radius: 38R Ksdpfsxcpvksx Afisdu Injection unit: - Screw diameter: mm 145 - Shot weight: g 8640 - Injection volume: ccm 9495 - Specific injection pressure: bar 1552 Cores fixed platen: 2 hydraulic and 1 pneumatic Cores moving platen: 2 hydraulic Hot runner zones: 12 Electrical parameters - Connected pump load: kW 90 - Heating capacity: kW 61 Weight and dimensions - Net weight: t 65 - Machine dimensions (L x W x H): m 10.98 x 3.29 x 2.49

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Wittmann robot General description: The machine is equipped with a fully hydraulic clamping system. Control: MC5 with color monitor, integrated operator panel, and three built-in USB ports. Plasticising unit: Complete unit for thermoplastics in a wear-resistant version, screw diameter 120 mm, non-return valve, open nozzle. Technical data Clamping unit Mould clamping force: 11,000 kN Mould opening force: 770 kN Dimensions of clamping plates (h × v): 2210 × 1910 mm Tie bar clearance (h × v): 1550 × 1250 mm Mould opening stroke: 2000 mm Mould height (min–max): 600 – 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Max. shot weight (PS): 6175 g Screw speed (standard/option): 103 / 145 rpm Injection rate (standard): 1118 cm³/s Injection rate (with accumulator): 1696 cm³/s Kdjdpoxcputefx Afieu Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 82 kW Number of heating zones (barrel): 7 Number of dry cycles according to Euromap: 802 / h Oil tank capacity: 2440 l Dimensions and weight Net weight (incl. control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m