Used Plastic Baler for sale (6,100)

Condition: good (used), Manufacturer: Mil-tek Model: 205 TS Machine type: Plastic press / Film press Operating pressure: 8 bar Test pressure: 11 bar Material container: 20 l Drive: pneumatic Bodpfx Aboyx Skre Islf CE marking: present Quantity: 4

Condition: like new (used), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, Used Bramidan B30 baler. Newly repainted. Ready for use, fully equipped, in perfect working condition. New oil. Bljdpfx Aboviymwe Isf

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Bodper Dufbefx Ab Ielf Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2022, condition: ready for operation (used), 4 units Coloring Device / Dosing System for Plastic Granulate – Hydracolor 150-S/450 (TBH) For sale are a total of 4 dosing systems / coloring devices suitable for use in plastics processing or injection molding operations. Manufacturer: TBH Plastic Technology Model: Hydracolor 150-S/450 Type: Dosing system for granulate / masterbatch These units are designed for precise dosing and homogeneous blending of color masterbatch or additives directly into the material flow, ensuring reproducible coloration throughout the production process. Ideal for: - Injection molding operations - Plastics processing - Series production with consistent quality Blodpfx Abeyybtxs Isf Features & Equipment: - Dosing system for plastic granulate - Hydracolor coloring unit - Microprocessor control - Connection cable / control unit - Easy integration into existing systems - Consistent and reproducible dosing - Robust industrial-grade construction Quantity: Total of 4 units available: - 1 unused unit (new) - 3 used units, good condition Condition: - Used devices fully functional, taken from running production - Normal signs of use present - Unused device is new Special Features: - Ready for immediate use - Compact design, mountable directly on injection molding machines - Proven system in industrial applications - Machine location: Northern Bavaria _____ Our terms and conditions apply. The seller is not liable for typographical or data transmission errors. All details and images were provided by the owner and released for publication. The optical condition of the offered items corresponds to age and the images shown. Technology and wear of the offered items are appropriate to their age. Used machines are sold exclusively to commercial buyers without warranty.

Condition: not inspected (used), Tank, Plastic Tank, Liquid Storage, Liquid Tank, Used Machine Overall dimensions: Height 2500 mm Diameter 2000 mm Tank Capacity: 6 m3 Material: PE (Polyethylene) Bodpfera Dahox Ab Islf Manhole Diameter: 580 mm Liquid Drain, Filling Pipe Diameter: 100 mm There is no liquid level indicator, and we have not conducted a leak test on the tank. There are several pieces

Year of construction: 2024, condition: new, functionality: fully functional, We are a manufacturer of complete technological lines for washing and granulating plastics. We also offer individual devices such as centrifuges, washers, screw presses, and flotation tanks. A high-performance plastic washing and granulation line, engineered for processing a wide range of materials including PE, PP, HDPE, LDPE, LLDPE, PS, and ABS. This comprehensive recycling solution efficiently manages cleaning, drying, and granulation processes, ensuring the production of high-quality recycled material. Each line is custom-designed to meet the specific requirements of our clients, with throughput capacities ranging from 300 kg/h up to 2,500 kg/h, providing the ideal solution for operations of any size. The system is built for long-term durability and user-friendly operation, making it suitable for both small and large-scale recycling plants. Advanced technologies maximize productivity, reduce energy consumption, and ensure consistent results, delivering a reliable and cost-effective solution to enhance plastic recycling efficiency. Bedpfxjuqu Uhe Ab Ielf Please contact us for inquiries and quotations. Erfor.pl

Year of construction: 2025, condition: new, functionality: fully functional, DYNAMIC WASHER Model ERFOR® DR8 Component machine for recycling washing lines ♻️ ♻️ ♻️ Dynamic washers are machines designed for cleaning moderately contaminated and fragmented plastic waste, such as: PP packaging, PVC, PET bottles, shredded big bag materials like LLDPE, LDPE, HDPE, PP, PVC, PS, Blodpjuqlmzjfx Ab Iof household chemical waste, and many others. The washers offered by Koltex PRS are easy to operate and reliable machines, which can be configured into a highly efficient dynamic cascade washing system (tandem – 2 x 30 kW, 2 x 55 kW, or 2 x 75 kW). Multi-point water dosing to the screen washers (cleaning system) and active contamination extraction ensure more effective operation, while dynamic feed movement is enabled by rotating impeller blades. The extended screen section (1400 mm) significantly enhances washing quality, and drainage of excess water is ensured by an acid-resistant steel screen. The use of two screen segments improves the ease of maintenance. Model – DR8 Motor power [kW] – 30 / 55 / 75 kW Film drying capacity [kg/h] – 1000 / 1500 / 2000 kg/h Milling drying capacity [kg/h] – 4500 Our portfolio also includes: - Complete plastic recycling systems - DWFS® washing lines - Granulation and extrusion lines For more information, please visit our website.

Condition: new, functionality: fully functional, Plastic Modular Belt supplier Bljdpfsypcd Nox Ab Ijf

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. Bledpfx Aeuqmaveb Isf The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Blodsvmxvfopfx Ab Ief Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: good (used), We offer a range of auxiliary granulators for sale. Further information available upon request. Bedpfx Ajyl Ucvsb Iolf

Year of construction: 2026, condition: new, Description: The FR8 flotation tank is designed for density-based separation of plastics in recycling washing lines. The machine separates floating materials from sinking contaminants, improving material purity before further washing, drying, or granulation processes. Suitable for continuous industrial operation 24/7. Materials: PE, PP, HDPE, LDPE, plastic flakes, films Features: Bodpfoyh Hx Esx Ab Ielf Effective density separation (float/sink process) Heavy-duty industrial construction Continuous operation for recycling lines Easy cleaning and service access Ready for integration with pre-washers, friction washers, and dryers 📩 Available in customized configurations. Contact us for details.

Year of construction: 2026, condition: new, functionality: fully functional, The PR8 pre-washer is designed for intensive pre-washing of plastic waste in recycling lines. The machine removes sand, soil, and mechanical contaminants, preparing material for further washing stages. Suitable for continuous 24/7 industrial operation. Materials: PE, PP, HDPE, LDPE, plastic films, post-production waste Technical data: Capacity: up to 2000 kg/h Drive power: 30 kW Rotor length: 3000 mm Rotor diameter: 680 mm Dimensions (L x W x H): 3689 x 1766 x 3294 mm Bedpfxsyh Hr Eo Ab Iolf Inlet opening: 500 x 450 mm Features: Heavy-duty industrial construction Replaceable wear parts Easy service access Ready for integration into complete washing or recycling lines 📩 Available in customized configurations. Contact us for details.

Year of construction: 2026, condition: new, functionality: fully functional, Plastic crusher with 30 kW motor power, 800 mm wide rotor, capacity up to 1 ton of rigid plastic, 500 kg/h for film materials. Suitable for crushing PP, PE, PVC, ABS, etc. Equipped with 6 rotary blades and 4 fixed blades. Crushers are tested in our production facility under real 24/7 industrial working conditions. Very easy to open the crusher and change blades. Screen size: 12 mm. Electric cabinet included. A very strong and powerful machine. Optional air blower and silo storage for fully automatic operation are available. Spare blades and screen included. For more photos and working videos, contact us via WhatsApp. Bedpfx Absychdhe Islf

Condition: good (used), Plastic sheets, plastic laminate Bljdpfxsb A Nwpo Ab Ief -various sizes -Thickness: 6 mm -Outdoor outdoor area: usable -on: 2 pallets -Sale: only complete set -Dimensions: 1450/3100/H340 mm -Weight: 720 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb 23 resin silos with the following capacities: - 54 kg * 4 pcs Bjdpswx E Nbefx Ab Iolf - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote.

Condition: excellent (used), Year of construction: 2002, MECA PLASTIC MECA ID.NO. 2620 Bljdpfx Abjqu Tw He Iof Meca Plastic mod Meca tray sealer with 2x tools Vacuum / Gas machine. Busch 160 cc vacuum pump year mod 2002 very nice condition! Tools 1. 255 x 255 mm Tool 2. 320 x 255 mm. Dimensions 430 x 115 cm H 160 cm.

Condition: used, range L-W-H 490x310x190 mm weight max. in kg 20 kg Temperature range -10°+50° °C Colour grün RAL material PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. Blodpfx Aohr Ex Heb Ijf

Condition: new, Year of construction: 2025, functionality: fully functional, Drying Centrifuge Model ERFOR® CR8 Blodpfeuql Rtsx Ab Ief Component device for recycling washing lines ♻️ ♻️ ♻️ The machine is designed for drying plastics—both soft and hard—including: films such as LLDPE, LDPE, HDPE, PP, PVC, PS, PA, post-agricultural films, agro-fibre, shredded big bags, PP sacks, fishing nets, peat packaging, and many more. Drying centrifuges Model - CR8 55/75 Motor power [kW] - 55/75 kW Film drying capacity [kg/h] - 1500/2000 Dimensions (L*W*H) (mm): 1970*2800*2060 / 2100*3150*1900 Ground material drying capacity [kg/h] - 5000 Our offer also includes: Complete plastic recycling systems DWFS® washing lines Granulation and extrusion lines For more information, please visit our website.

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Bledpfx Ajuqwzwjb Isf Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Bljdpfjrl Rv Tox Ab Ief Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Power supply 220 V mono 50 Hz Weight : 25 kg

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 270 kg, warranty duration: 24 months, empty load weight: 265 kg, Robust and compact construction High-quality components with a longer lifespan Above-standard productivity Adjustable bale height (three sizes) Automatic start for efficient compaction Bale trolley for easy transport Material selector for cardboard and plastic Full bale indicator and service indicator Bedpfx Aou Tqmdsb Ijlf Compliance with EN 16500:2014 safety standards

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Price: On request - Year: 2005 - Documentation available: No Blsdpjyrtcujfx Ab Isf - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Price: On request - Year: 8 - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Blsdpjym Uxtofx Ab Isf VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1983, total width: 750 mm, total height: 900 mm, total length: 2,400 mm, Empty weight: 500 kg - Year: 1983 - Documentation available: No - CE certificate present: No - Transport dimensions: 2400mm x 750mm x 900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Bedpfxexalyyo Ab Islf VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels