Used Plants for sale (2,892)

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. Hodpfxsy T Ukds Amysr * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: used, Year of construction: 1999, operating hours: 13,300 h, * Bitelli SF 200 asphalt milling machine Hodpfxjzm Epbe Amyer * Year of manufacture: 1999 * Operating hours: 13,000 h * MB engine * Milling width: 2 m * Hydraulic folding conveyor belt * Weight: 29,000 kg * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Hedpfx Aezmyvismyor Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, WOLFF - Sand separation and washing plant Hodpfey N Rtyjx Amyjr

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE Hodey N Rlvjpfx Amyer The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Hedpeh D If Hsfx Amysr Location: 54634 Bitburg

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min Hjdjzk Epcspfx Amyjr – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: used, Complete primary and secondary crushing plant, consisting of the following components: Primary crusher: LOKOMO K-140 single-toggle jaw crusher 1,400 x 1,200 mm, feed hopper, vibrating feeder and discharge chute. Secondary crusher: LOKOMO G4214 cone crusher, cone diameter: 1,350 mm, feed and discharge box, electrical and hydraulic installation. Screening plant: LOKOMO B 256T, screen area: 4,000 x 1,300 mm, with steel structure. Secondary crusher: LOKOMO S21-14 cone crusher, cone diameter: 2,100 mm, hydraulic installation; optionally with steel structure. Conveyor belts: LOKOMO 800mm x 10m, 1200mm x 6m, 1000mm x 31m, and 1400mm x 32m. Hsdpjwcyh Hofx Amysr

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Hedpfx Ajtziudemyjr Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Condition: ready for operation (used), A complete Krones bottle cleaning and filling line is available. Throughput: 8000bottles/h, carousel pitch: 161mm, carousel diameter: 1800mm, filling valves: 50. This is a complete rinser and filler monoblock for glass and plastic bottles. Documentation available. An on-site inspection is possible. Hjdpfozmh Slsx Amyer

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, machine/vehicle number: W-028664, We offer a high-quality Eirich intensive mixer R08 for sale. Technical data: • Manufacturer: Eirich • Model: Intensive mixer R08 • Machine number: W-028664 • Year of manufacture: 2006 • Usable volume: max. 75 liters / 120 kg (maximum values) • Batch operation • Maximum mixing material temperature: 40 °C Special design The machine features a hydraulically pivoting mixing top section, which allows the mixing tools and the mixing container to be cleaned particularly easily and quickly. This design significantly simplifies maintenance and cleaning work. Control system Including machine control system STA015847A for the Eirich intensive mixer R08: • Siemens Simatic OP7 • Supply voltage: 400 V ±5 %, 3/PE, 50 Hz ±2 % • Switchgear voltage: 24 V DC • Valve voltage: 24 V DC • Direct switching of all motors Electrical equipment • Main switch with integrated emergency stop according to VDE 0113 / IEC 204 • 3-pole power disconnect switch • Lockable with a padlock Condition The machine underwent a complete mechanical and electrical overhaul at the Eirich factory in 2017. Since this factory overhaul, the mixer has been used exclusively for occasional experimental and testing purposes and is therefore in very good technical condition. Scope of delivery Hjdpfozmhztox Amyor • Eirich intensive mixer R08 • Machine control system STA015847A • Ex works • Loading onto a truck is possible • Packaging by agreement Inspection The mixer can be inspected in Bachenbülach by prior appointment. We will be happy to provide you with further information or arrange an inspection appointment.

Year of construction: 2012, condition: good (used), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Inlet size: 1.320 x 680mm Included: Hedpsilh Efjfx Amyer – Frame – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock!

Condition: good (used), functionality: fully functional, power: 100 kW (135.96 HP), fuel type: diesel, overall weight: 23,000 kg, Year of construction: 2022, Engine power: 100 kW / 134 hp Transport dimensions: 13,000 x 2,300 x 3,200 mm (L x W x H) Screen area, upper deck: 3,660 x 1,370 mm Engine manufacturer / type: Deutz / TCD 3.6 Stage V Screening machine: 2-deck Hopper volume: 6.0 m³ Operating weight: 23,000 kg Hjdpozkkgtofx Amysr Screen area, lower deck: 3,460 x 1,370 mm

Year of construction: 2011, condition: used, functionality: fully functional, For sale is the complete plant technology of a biomass power plant (year of construction 2011) with an electrical output of 2.4 MW and a thermal output of 7.5 MW. The plant will only be sold as a complete package. The sale of individual components or spare parts is not possible. Hodpfx Aezmf Nbsmyor The plant technology includes the essential technical equipment for energy generation and is suitable for reconstruction, relocation, or as an extension of existing plants. It is in good condition and can be inspected by appointment.

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Complete line in "U" arrangement, consisting of: - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking Hedpfxouct Upe Amyor - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) - Year of manufacture: 2003 - Electricity requirements: 400V; 50 Hz; 115 kW; 300A

Year of construction: 2019, condition: ready for operation (used), A complete and fully automated tank storage and mixing system for the production of non-alcoholic, non-explosive liquids is available. Stainless steel tanks: 2, tank volume: 5m³, total volume: 10m³. Equipment: load cells, dosing pump, agitators, control system and level sensors. The system has seen very little operation and is therefore in an almost like-new condition. Documentation available. An on-site inspection is possible. Hsdjzl U H Hepfx Amysr

Condition: used, mileage: 376,615 km, power: 265 kW (360.30 HP), gearing type: mechanical, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 20,500 kg, maximum load weight: 11,500 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 09/2008, emission class: euro4, brakes: constant throttle, suspension: steel, driver cabin: day cab, Equipment: ABS, additional headlights, cabin, central locking, cruise control, traction control, Vehicle location: Bovenden, with housing, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, Telligent gear shifting, 16-speed gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, work lights, rotating beacon, storage compartment, leaf spring suspension, 2-axle with front-wheel steering, U-shaped protection, side aluminum fender, roof hatch, remote control, green environmental badge. Hedpfx Amszl Tgroysr Body: Schwing-Stetter FBP 20-100, drum AM7FHC+L, remote control (remote control). Operating hours (read) total approx. 21,508, auxiliary drive: approx. 10,483 operating hours, concrete pump: approx. 3,321 operating hours, boom approx. 4,260 operating hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. Hjdpfx Amozl Shzeyer • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: used, Year of construction: 2011, Length 5000 mm Hjdey Ty E Hepfx Amyor Width 100 mm Height 2800 mm Year 2011 0 Range + Heine Conveyor Technology with Reiter electrostatic airless spray technology. Fully automatic industrial painting and coating line for wooden windows, window frames, doors, and wooden elements for sale on behalf of a client ----- ----- Technical Manufacturer’s Description (Summary): Item 1 Conveyor System: Power + Free circular conveyor, frequency-controlled drives, buffers, stop stations, crossbeams, steel structure according to layout. Item 2: Flood Coating System: flowcomat II-P for priming/pretreatment. Item 3: Spraying Technology: Reiter MAE 7-059 electrostatic airless spray systems with automatic spray devices. Item 4 Lifting Technology: MH2T mechanical lifting devices, lifting range approx. 3,200 mm. Item 5 Material Supply: High-pressure ink supply, isolated material supply, ink switching, ring line, cleaning agent supply. Item 6 Control System: Siemens S7-300 for conveyor technology as well as Reiter control system with workpiece recognition and high-voltage power supply. Item 7 Documentation (available separately): Range + Heine order confirmation, layout plan, Reiter order confirmation, and technical descriptions available. ----- ----- Key Technical Data: Workpieces: Wooden windows, window frames, doors Workpiece length: up to approx. 5,000 mm Workpiece height: up to approx. 2,800 mm Capacity: approx. 60 window units per shift Coating systems: water-based systems / low-VOC Control system: Siemens S7-300 Electrostatic: 100 kV / 1 mA ----- Price of the above machine available upon request! ----- Further technical data and information in the attached PDF! ----- (Technical specifications according to the manufacturer—subject to change!) All prices listed are net, plus applicable sales tax.

Condition: used, CIP system comprising a total of 7 tanks, of which: - 1 tank with a capacity of 60 hl, used as a buffer water tank - 5 tanks, each with a capacity of 30 hl (built in 1992), for acid, buffer water, Desi and 2 x lye - 1 tank with a capacity of 20 hl (built in 1992) for fresh water Other system components: - 2 centrifugal pumps - Heat exchanger - Conductivity measurement - Various pipework and valves Additional title: 7-tank CIP system with pumps and heat exchanger Volume stacked water tank: 6000 l Hsdpszi Anajfx Amyer Volume 5 x tanks for cleaning solutions: 3000 l Volume fresh water tank: 2000 l Material: stainless steel Position: vertical vessels each on 3 feet Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 2 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

Condition: used, System for depalletising empty beverage crates and palletising full beverage crates. The system consists of the following components: - Depalletiser (Matek/Packtech, 2001), robotic gripper arm with clamping grippers. Upgrades were carried out in 2017. - Palletiser (Matek/Packtech, 2001), robotic gripper arm with clamping grippers. - Pallet pressure control (Matek/Packtech, 2001) - 2 pallet magazines for good and defective pallets - Pallet labelling (2005) for applying ‘EAN 128’ labels - Pallet strapping (Strapex, 2005) - Pallet conveyors with loading and unloading stations Additional title: Complete palletising and depalletising system for beverage crates; manufactured Capacity: 44000 bo/h Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates Features: Depalletising robot; Palletising robot; Pallet inspection; 2 x pallet magazines; Pallet labelling; Pallet securing; Pallet transport; Pallet receiving and dispatch Hjdpfx Amezizwajyor

Condition: used, Year of construction: 2003, A system for blending beer with degassed water and subsequent carbonation. Additional title: Carboblender for precise mixing and carbonation Hodpfx Amjziztheyer Capacity: 20000 l/h Material: contact surfaces from stainless steel Position: mounted on stainless steel frame Features: various pipes, valves and sensors; control cabinet with touch panel

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in new condition. Type: VDS P6030 Automatic processing of a complete process from loading to unloading. Mixing of two components (e.g., resin and hardener) directly in the process. Precise application of the material at defined positions on the workpiece. Movement of parts via a 3-axis system (X, Y, Z). Operation in automatic, semi-automatic, and manual mode. Technical data: Power connection: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Hedey Naf Ejpfx Amyjr Fuse rating: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10 % to 85 % (without condensation) Enclosure protection class: IP21 Foundation inclination: max. 0.05 % Clearance around the machine: 0.8 m Clearance in front of the control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Type: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Stirrer in each tank Vacuum sensor per tank Level sensors including overfill protection Intake valve per tank Sight glass with lighting Vacuum degassing directly in the tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous delivery in a dual pump system Pump variants horizontal and vertical for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect the vacuum pump Control via SCP touch panel Operating modes: automatic, pause, external control Material circulation in pause mode Connection to external control via interface possible Monitoring of production time, system availability, and material consumption Calculation of the remaining material availability Supply: 230 V or 400 V AC Operation outside the EU with a transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Type: LP804 Technical data: Application: Conveying and processing of 1-component and 2-component dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liters Control voltage: 24 V DC Power connection: according to wiring diagram Rated current: according to wiring diagram Power consumption: according to wiring diagram Fuse rating: according to wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10 % to 85 % (non-condensing) Enclosure protection class: IP54 Protection class entire system: IP20 Installation surface: max. 0.5 % inclination Clearance around the system: 0.8 m Clearance in front of the control cabinet: 1.2 m Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Scheugenpflug SNDE121196 ZES 217955 Dimensions: L 212 cm / W 209 cm / H 215 cm / Scheugenpflug SNDE121197 ZES 217958 Dimensions: L 190 cm / W 190 cm / H 220 cm / 430 kg (machine) + 100 kg Scheugenpflug SNDE118236 ZES 216335 Dimensions: L 200 cm / W 100 cm / H 220 cm / Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Further questions can be clarif

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Hjdozizq Tjpfx Amyjr Additional title: Complete filtration system with buffer tanks and dosing for filter aids Filtration capacity: 18000 l/h Material: Contact surfaces from stainless steel Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors

Condition: used, Refrigeration system with NH₃ in the primary circuit and glycol in the secondary circuit. The system consists of the following components: 1. 2 refrigeration compressors for compressing NH₃, of which: - 1 x reciprocating compressor (Sabroe, 2008) with a capacity of 75 kW (used during normal operation) - 1 x screw compressor (Stal, 1991) with a capacity of 75 kW (used as a standby unit) 2. Plate heat exchanger (Alfa Laval, 1997) for evaporating NH3 whilst simultaneously cooling glycol. 100 m³/h of glycol is cooled from 0°C to -3°C. The glycol transports the cold into the process. 3. Condenser for the liquefaction of NH₃ (Evapco, 2002) with a condensation capacity of 620 kW, installed outdoors. 4. NH3 collection tank (EM-Polar, 2009) with a volume of approx. 3 hl 5. Glycol tank, vertical, clad 6. 2 centrifugal pumps for pumping glycol 7. Control cabinet with touch panel as HMI. 8. Various pipework, valves, sensors Additional title: NH₃-glycol cooler as a secondary cooling system; manufactured between approximat Cooling capacity appr: 300 kW Operation / Control: Simatic S7-1500 (manufactured in 2022) Hjdozizkgjpfx Amyjr Features: 2 x refrigeration compressors; plate heat exchanger (evaporator/glycol cooler); condenser; NH₃ tank; glycol tank; 2 x glycol pumps; control cabinet with touch panel; various pipes, valves and sensors