Used Plants for sale (2,820)

Condition: used, Year of construction: 1995, Concentrating plant for the juice industry. The plant dates back to 1977 and was rebuilt in 1992. It was extended and equipped with a new cooling tower circuit. The plant is designed for 6600 kg/h of cloudy apple juice. With a single-stage concentration, the juice is thickened from 12° to 25°Brix. Up to 71°Brix can be achieved in the second pass. Additional title: with aroma recovery Input quantity apple juice: 6600 kg/h Water evaporation: 4840 kg/h Discharge quantity concentrated juice: 1760 kg/h Steam consumption: 1685 kg/h Length: 7,70 m Width: 6,70 m Gisdpfxowu N T Ao Ab Djt

Condition: used, Additional title: with automatic regeneration Nominal flow: 9800 l/h Pressure working area: 6 bar pressure class: 8,5 bar Operating temperature: 25 °C Ambient temperature: 35 °C Current: 0,35 A Voltage: 230 V Gedpfxjw Tbuns Ab Doit Frequency: 50 Hz Weight: 390 kg Features: 2 x softening tanks (resin-filled); brine tank; valves and pipes

Year of construction: 1992, condition: used, The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water or dealcoholised beer). Additional title: dialysis Giedpfx Absvcqkte Djt Capacity: 3 hl/h remaining alcohol content: approx. original alcohol content: approx. 5 % Length: 3,6 m Width: 1,7 m Height: ca. 8,4 m Weight: 900 kg Operation / Control: Control cabinet with operating buttons and touch display Features: 6 membrane modules, column DN400; plate heat exchanger TS6-MFG, Alfa Laval, year of manufacture 2006

Condition: used, Year of construction: 2000, Refrigeration system as an ice storage system with refrigerant R404a and a cooling capacity of 6.5 kW. Consisting of the following components: -stainless steel evaporator system -Plastic tank, double-walled, insulated -Refrigeration compressor -blower to increase the melting capacity -Refrigeration aggregar with condenser block and ice regulator -Ice water pumps -Switch cabinet Additional title: Ice storage plant Gisdpfx Asw Td Evsb Djt Cooling capacity: 6 kW Storage capacity: 55 kWh Max melting capacity: 42 kW Max. operating pressure: 25 bar Power: 7,5 kW Current: 18 A Voltage: 400 V Frequency: 50 Hz Length: 2610 mm Width: 1170 mm Height: 1800 mm Weight: 2 t Features: Evaporator system, plastic container (insulated, double-walled), refrigeration compressor, fan, refrigeration unit (with condenser and ice regulator), 2 ice water pumps, control cabinet

Year of construction: 2016, condition: used, Malt milling with 4-roller grist mill. Additional title: with 4-roller grist mill Capacity: 4 t/h Operation / Control: Siemens Simatic S7-300 Gedew Tmtvopfx Ab Deit Features: 3 x silo discharge, small; 4 x silo discharge, large; malt transport; blower; malt scales; malt conditioning; malt mill, 4-roller; control cabinet and control system

Condition: used, Year of construction: 2018, Refrigeration system with refrigerant R134a. The system consists of the following components: - Refrigeration compressor (Trane Roggenkamp, 2018, commissioned in 2020) - Condenser (Roggenkamp, 2019), installed outdoors with 2 fans - Buffer tank for refrigerant (Cordivari, 2019) with a capacity of 501 litres - Expansion tank for refrigerant (Reflex, 2019) with a capacity of 140 litres and a maximum operating pressure of 6 bar - Refrigerant pump (KSB, 2019) Additional title: R134a Cooling capacity: 25.7 kW Power: 9.6 kW Current: 400 V Voltage: 41 A Frequency: 50 Hz Giodpsxfqumofx Ab Dot Features: compressor; condenser; buffer tank; expansion tank; refrigerant pump; various pipes, valves and sensors

Condition: used, Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment (PENTAIR) - Refrigeration system with compressor, buffer tank, equalising tank, refrigerant pump - Pipework Additional title: 10 hl brewhouse with storage tanks and supply technology, largely built in 2019 Cast wort capacity: 1000 l Material: Brewhouse from stainless steel Giedpfjxwyzajx Ab Djt Features: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindroconical storage tank, booster pump, beer pump, CO2 warning device; cleaning lance, pressure reducer, tap heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment, pipework

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Gsdjxzqt Ijpfx Ab Deit Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: used, Year of construction: 2020, HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1" inlet and outlet pipes which also act as a CIP loop. The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE . Machines that Can Be added with on extra sale are the below : 1) SEPARATOR Specifications Manufacturer :Seital/SPX Model :SE05 Condition : Used Stock Number:834 Manufacture:Seital Capacity : 1200 L/h Cleaning : Manual Cleaning Tools : Included Manual Book : Included Base Frame : Included 2) HOMOGENISER Specifications Manufacturer : GEA Model: NS20002H Year : 2009 Condition : Used Serial Number : 7818 Giodjy Ry Hrepfx Ab Dot Stock Number 110613074 Capacity : 30 L/H on 600 Bar Capacity : 500 L/H on 200 Bar Working Pressure: 200 to 600 bar Max No. Stages: 2 condition : Very Good condition Available: Immediately SOLD AS A COMPLETE PACKAGE OR SEPARATE Volume capabilities (litres): 500 Balance Tank: Included PHE Temperatures: 4-45-55-65-72-4 Outlets: Separator and Homogeniser Outlets Divert Valve: Included Dimensions in cm : 160 x 80 x 200 Product Pump: Included Hot Water Pump: Included Comtrols: HMI Touch Screen CIP: Program included for self Clean in Place Specifications Manufacturer: Seital/SPX Model: SE05 Condition: Used Stock Number: 834 Manufacture: Seital Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included Manufacturer: GEA Model Homogeniser: NS20002H Year: 2009 Serial Number: 7818 No. Stages: 2 Condition Homogensier: Very Good condition Available: Immediately

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories Gsdpfey Rx Ibex Ab Doit • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. Gsdpfx Aboy Rx Ete Dsit COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 160 Production capacity: 160 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 4x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 160 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Gijdpfx Abey Naf Ee Dot Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: used, Little used ethanol / alcohol dehydration plant manufactured in Spain in 2015 with capacity 90,000 litres/day of minimum concentration 99.8 ºGL alcohol suitable for use as biofuel. Raw material should be distilled alcohol with a minimum concentration of 95.5 ºGL. Gisdpfx Aeyhc Ixjb Det Major equipment includes: - (2) Molecular sieves; (2) vertical shell & tube heat exchangers; (4) horizontal shell and tube heat exchangers; alcohol evaporator; (2) plate heat exchangers; column; (2) process tanks; pumps and motors; instrumentation, controls and valves; steam boiler. Process description available on request.

Condition: ready for operation (used), Year of construction: 1998, A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible. Gisdey Rtg Sjpfx Ab Dst

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Gijdporq Hmzjfx Ab Det Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: used, Year of construction: 2001, functionality: fully functional, Multipurpose reaction system with Büchi Glas Uster borosilicate glass assembly. The system consists of two multipurpose units, each equipped with a CR 101 reactor and a gas scrubber. These are two complete systems that can be set up together or separately as individual units. We can design and customize the configuration according to customer requirements, including the system control. Giodpfx Abjy Rkk Uj Dst

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Year of construction: 2016, operating hours: 360 h, KIMERA SRL KM 0010 Small MULTIMIX / Concrete Mixer / Large Version • Manufacturer: KIMERA SRL • Model: KM 0010 Small MULTIMIX • Year of manufacture: 2016 • 360 operating hours • Maximum production output: 25 m³/h • Maximum batch size per cycle: 4 m³/h • Large configuration • Mobile concrete batching plant • Mobile complete system – ideal for transport by truck or trailer • Immediately ready for operation – no foundation required • Independent control unit with operator panel, USB port, start/stop/emergency stop • Premium grid covers & conveyor technology for material loading and mixing process • Safe and robust construction for jobsite environments • Suitable for dry and wet mix production directly at the jobsite • Efficient & precise – saves material and time through inline dosing • Total weight: 1,400 kg • Length: 600 cm • Width: 300 cm Giodpfx Abeyxqf Io Det • Height: 300 cm • German machine • Immediately operational • This offer is non-binding and subject to change. - Prior sale reserved, - Errors and/or typographical mistakes excepted. - Sale subject to our General Terms and Conditions.

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, Part size: 1,200 x 800 x 400 mm, comprising: 4 painting robots, paint dryer, heat medium natural gas, max. temperature 100°C, exhaust air volume flow 1,500 m³/h, circular conveyor system by Hero, batch of load carriers, control and switch cabinets, preparation and supply racks, platform system, stairway access, accessories. Gedpsx Ry Rdjfx Ab Doit +++ Attention: Machine is part of an online auction! +++

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, featuring unique quality, honest workmanship, and at a fair price. Honest Work: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Fair Price: We produce in Poland and are transparent about it. Other competitors who label their product as 'Made in Germany' typically only assemble the machines in Germany and source most components from Lithuania. We let you benefit from the lower production costs, which allows our offer prices to often be 40% below those of competitors. These machines for pellet production are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! Giodpslt Ugtefx Ab Dot From systems for processing your own wood chips from firewood operations or joineries, to professional industrial pellet production from wood chips, straw, miscanthus, etc.—as well as manufacturing hay or straw cobs—we can provide the ideal solution for your needs. Our plants have capacities ranging from 150 kg/hour up to 5 t/hour and come equipped with all necessary components for a fully automated system. We offer tailored solutions for any input material and can integrate automation into existing systems as well. All machines and control units are equipped with components from Siemens, ABB, Schneider Electric, or similar leading brands. Please note: If you have a valid VAT ID, net purchases are possible! We look forward to your inquiry! For more information or direct interest, please contact me on my mobile at:

Condition: ready for operation (used), Aerzen GM150S blower for sale. Godpfx Aoy Rhyteb Doit

Condition: good (used), Imer mixing plant Type: Mix 360 Gisdpfoq Eh Huex Ab Djt Bowl diameter: 90 cm Boiler height: 52 cm Electricity: 400 V

Condition: new, Year of construction: 2019, operating hours: 0 h, machine/vehicle number: 20928, Burkhalter water treatment plant (state of the art, Swiss top quality) - Brand new (the unit has never been installed) Giodpfx Abep Hf Ido Dst - Please consult the attached PDF catalog: There you will find a detailed description of the plant as well as an extensive photo gallery (starting on page 8).

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging system. The system was purchased in 2024, has been dismantled, repackaged, and has never been operated. The original purchase price was €235,000! TECHNICAL DETAILS (according to the manufacturer) Performance: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag material: Paper (2–5 layers) with PE inner liner or PE Weighing range: 10–30 kg Weighing accuracy: 2 Sigma +50g/–0g Weighing accuracy: compliant with PTB MACHINE DETAILS Footprint: (approx.) 20 x 4 m Control voltage: 400 V, 50 Hz – 24 DC, 3 phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors/Gearboxes: SEW Pneumatic components: Festo Material: Stainless steel DIN 1.4301 Cable tray: Brand Cablofill Gijdsy N Tm Aspfx Ab Det Protection rating: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21, 500–1000 mm radius, zone 22 Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air requirement: 400 Nl/min Protection class: IP54 Aspiration air: 45 m³/min Note: Additional technical data can be found in the attached order confirmation.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: WMD 10 404. M80, We are offering this used Weinmann WMD 10 system for the production of roofs and ceilings, year of manufacture 2003. Model: WMD 10 Serial number: 10 404.M80 Year of manufacture: 2003 Comprising: - Multifunction bridge (1x saw, 1x stapler) as well as LatTeq system (automatic batten placement and 2x nailing devices) - Roof/Ceiling table, 12m in length, with 4 NC axes and 5 clamping pairs each (clamping capacity up to 2.5m wide) and foldable rollers (not driven) - Assembly table, 12m with clamping system (2x) and foldable rollers (not driven) - Butterfly turner The fastening devices are not included in the sale. The system will remain operational until approximately mid-June and can be inspected at any time by arrangement. If you have any questions, please feel free to contact us. Kindly send us a short message including your contact details. Giedpfx Ajy N S I Ssb Dot

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Euromecc Euro5 Mix Wet Year of manufacture: 2019 Theoretical output: approx. 60-75 m³/h Total output to date: 95,000 m³ Aggregate storage: 5 bins of 45 m³ each Material feed via bucket elevator Truck loading via 25 m³ loading hopper COMPLETE batching plant with WINTER COVER Mixer: 1 EUROMECC MEP 2000 planetary mixer with turbulator Aggregates: weighing conveyor (4 load cells, 5,000 kg each) Gsdpey N Sivjfx Ab Dsit Water: 1 water weighing system (500 kg) Additives: 1 additive dosing unit (2x12 l) Cement: 1 cement scale (1,000 kg) Cement silos: 6 units 2 x 150 m³ (D=4.6 m) 1 x 90 m³ (D=3.5 m) 1 x 45 m³ (D=3.5 m) Control container (ElettronData) / operator cabin included Plant in excellent condition and fully operational. Immediately available – currently located in Denmark. TRADE-INS CONSIDERED FOR VEHICLES OF ALL BRANDS: MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA – EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER – OR FOR EARTHMOVING MACHINERY: CATERPILLAR, FIAT-HITACHI, KOMATSU.