Used Pet for sale (536)

Condition: excellent (used), Year of construction: 1989, As-new, precision, gently-used bore and cylindrical grinding machine for sale due to lack of use! Nedpfox S Upwex Ahvjwd

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulation chamber is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Operating voltage: 400V Nsdelypy Espfx Ahvowd Power: 17kW Rated current: 33A Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Nodpfx Ahjw Ucxqevewd Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions.

Condition: used, This listing is for the Pipetman Gilson P200 50-200 Yellow Pipette Nwedpjxv Dtkjfx Ahvjd The unit is in full working condition and is ready for immediate useT The PIPETMAN Classic line, the world standard in pipetting, offers a wide range of continuously adjustable air-displacement pipettes suited for aqueous solutions of moderate viscosity and density. The PIPETMAN Classic line is available in eight single channel models covering a range of volumes from 0.2 µL to 10 mL.

Condition: used, This listing is for a used Pipetman Gilson P20 (2–20 µL) Adjustable Volume Pipette The unit is in full working condition and is ready for immediate use Used Pipetman Gilson P20 (2–20 µL) Adjustable Volume Pipette Description: Up for sale is a pre-owned Gilson Pipetman P20 adjustable volume pipette, ideal for precise liquid handling in the 2–20 µL range. Renowned for its accuracy, durability, and ergonomic design, this pipette is a staple in molecular biology and analytical labs. Specifications: Model: Pipetman P20 (UL) Nwjdpfx Asxv Dryjhvsd Volume Range: 2 to 20 µL Increment: 0.2 µL Pipette Type: Adjustable volume, air-displacement Tip Compatibility: Standard universal tips (200 µL size) Condition: Gently used, fully functional Calibration: Last calibrated [insert date if known, or "may require recalibration"] Features: Easy volume adjustment with secure locking system Lightweight and ergonomic for comfortable extended use Durable construction built for long-term performance Autoclavable tip ejector and lower part (refer to manufacturer guidelines) Included: Pipetman P20 micropipette only (No box or documentation included) Notes: The pipette has been cleaned and tested for accuracy. Recommended calibration before critical use.

Condition: used, This listing is for the Gilson PIPETMAN P1000 100-1000uL Single Channel Pipette with Metal Ejector The unit is in full working condition and is ready for immediate use Key Features & Specifications Volume Range: Fully adjustable from 100 to 1000 µL — ideal for a wide range of liquid handling needs Precision & Accuracy: Systematic (bias): at 100 µL ±3 µL, at 500 µL ±4 µL, at 1000 µL ±8 µL Random (precision): ≤0.6 µL at 100 µL, ≤1 µL at 500 µL, 1.5 µL at 1000 µL Construction: Built with durable PVDF and stainless steel components — trusted for reliability, robustness, and long lifespan Ergonomics: Designed for comfortable use with reduced pipetting forces to minimize hand fatigue during prolonged sessions Maintenance: Easy to dismantle with an autoclavable tip holder and ejector, ensuring convenient cleaning and decontamination Nwodpfjxv Dtdox Ahved Metal Tip Ejector: Durable metal ejector reduces tip ejection force and enhances longevity

Condition: not inspected (used), Peter frequency converter FUS 037/CV from automation system. worked until recently, but has not been checked Nwedjt Nhr Rjpfx Ahved €120 per unit. all 4 units €400

Condition: like new (used), Year of construction: 2015, 420 mm Njdpox Hhz Ajfx Ahvswd 2015 Tools 6-color etc.

Year of construction: 2018, condition: used, Automatic and Compact Njdpfsx E Awijx Ahvjwd

Condition: not inspected (used), Year of construction: 2002, functionality: not functional, disc diameter: 1,000 mm, Double-disc lapping machine hydraulically operated Disc diameter, outer Ø 1010mm, inner Ø 310mm Planetary gear unit, type 28/5, optionally 6 Carrier plate, type T28, quantity 5, optionally 6 bar Hydraulics 6 bar Electrics, 400V, 50 Hz, 230V Measuring control, +/- 2µm accuracy Upper drive, 2–160 rpm Lower drive, 2–160 rpm Inner pin ring 2–50 rpm Weight approx. 4000 kg Dimensions (LxWxH) approx. 4560x3830x2900 mm Machine can be inspected Delivery: EXW as inspected Nodeg E I Npepfx Ahvewd Payment: strictly net after receipt of invoice

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 12/3 VKL, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, Filling line with Off-loader, self adhesive labelling machine, date and batch printer, filling machine and off-loader. Including conveyers Nodpfoxxyk Rsx Ahvowd 3.500 bottles/hour We use the line with two persons Very easy to use and in very good condition Built year 2015 Fully documented Today its up and running outside Stockholm in Sweden

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Njdpfx Aetxitvohvswd Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, -Dimensions LxWxH: 785x1430x1265mm -Serial number: 178829 -Dough capacity: 120 kg -Flour capacity: 75 kg -Water capacity: 45 L -Bowl capacity: 186 L -2 speeds -2 timers -Power: 5.33 kW -Voltage: 400V -Weight: 488 kg MAG Eco 120 Fixed Bowl Spiral Mixer The VMI fixed bowl spiral mixer is renowned for its ability to knead small quantities of dough relative to the total bowl volume. It is perfectly suited to the production of traditional breads, specialty breads, and pastries. This model provides bakers with a high level of versatility and operational flexibility, making it an ideal complement to oblique axis mixers. A powerful, quiet motor and optimized transmission ensure consistent and repeatable kneading performance. The hinged lid design facilitates easy access to the dough. An ergonomic and precise control panel offers quick operation and consistent results. Its compact footprint allows installation even in the most confined bakehouse areas. Stainless steel construction enhances hygiene and ease of cleaning. - Dough quantity: from 3.2 kg up to 120 kg - Flour quantity: from 1.9 kg up to 75 kg - Water quantity: from 1.3 kg up to 45 kg Njdpfx Ahexwl Hnovjwd - Bowl volume: 186 liters

Year of construction: 2001, condition: like new (used), Carbide saw side grinder Petschauer model FL600 year 2001 Nwsdpfxed Emc Ue Ahvjd

Condition: new, Year of construction: 1989, Candle filter, free-standing on 3 stainless steel feet Filtration surface: 30 m²/h Test pressure/operating pressure: 7 bar Volume: 1830 l Length: 1,5 m Width: 1,5 m Nwsdpsxbqkgofx Ahvjd Height: 2,9 m Material: Stainless steel 1.4541; wall thickness of jacket and cone 4 mm; of dished bottom 6 mm Features: Outlet: butterfly valve DN150

Condition: used, Year of construction: 1995, W A N D E R E R Model H 200 V/TNC 360 C Table size 1250 x 720 mm – Travels: X 1000 mm, Y transverse 500 mm – Max. distance from table to spindle (vertical reach 700 mm – max. reach from column face to spindle center – transverse 760 mm). Machine with automatic folding head for automatic swiveling from horizontal to vertical or vice versa – also available. Automatic tool clamping with SK 50 – Work area cabin – Electronic handwheel – Heidenhain 360-C contouring control with color graphics and electronic handwheel – Machine with approximately 30 cutter holders – Swiveling control panel, etc. 1 used, excellently preserved bed-type milling machine of very sturdy construction: Njdpfeb I Iqcsx Ahvjwd The machine was overhauled in 1995 for *150,000.00 DM – the overhaul work included the complete restoration of the geometry to new machine accuracy and the conversion to TNC 360 contouring control. 8 mm infeed with cutter head is no problem! Numerous SK 50 holders – machine mounts, etc. Hand-scraped guideways in top quality.

Condition: as good as new (ex-display), incl. hydraulic unit Njdod Szimopfx Ahvewd Without power chuck Schunk Type: Rota THW +165 -43 CHF 8'250 EUR*

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome. Nwjdpfx Ahsth Taajvjd

Condition: used, Year of construction: 2009, Capacity: 30 MW Fuel quality: Wood powder/Grind size Nsdpfxsg Ti H Do Ahvjwd

Condition: like new (used), Year of construction: 1999, Flexo printing machine for printing self-adhesive labels Nilpeter FA 2400 Nwedpfx Asf H Svajhvsd UV flexo machine - 6 colors The year of production - 1999. The machine is accompanied by printing cylinders: Z 93, 86, 96, 100, 102 + RUBBER TONING Magnetic cylinders Z 93,96,86,100,102 (correct) Anilox rollers: 4 x 480 lines - 3.5 cm3 4 x 220 lines - 5.5, cm3 1 x 320 line - 3.5 cm3 60 ͦC

Condition: used, mileage: 790,000 km, power: 357 kW (485.38 HP), first registration: 07/2011, fuel type: diesel, overall weight: 23,500 kg, axle configuration: 6x4, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Here is your chance to drive a US truck and transport 28 pallets if necessary. The price is incl. the trailer (EZ. 2015) We can also remove the body completely for you so that you have a SZM again or just purely as a show truck for cruising. Nsdpfx Aoqx Sulohvjwd Conversions such as chrome parts and leds are included in the price after consultation with you !!! Cummins ISX 15 L 18 Speed Fuller 2 beds Original Peterbilt leather seats Inside typical Peterbilt everything your heart desiresThe truck has too many extras to list. - Further questions by email or phone. - Price incl. German letter. - Errors and prior sale reserved - financing and trade-in possible, offer everything. - TIPPING HYDRAULICS POSSIBLE FOR AN EXTRA CHARGE!!! - . - OUR motorhomes ARE REGISTERED AND TAXED IN GERMANY AND ARE INCLUDING AN EU VEHICLE LETTER . WITH US, THE NAME HAS QUALITY WE CAN - - Your dream vehicle not included in Europe's largest US truck fleet ? Not your company or favorite color? No problem... we have over 500 more trucks or motorhomes in the USA and Canada new and used of all brands also work with one of the best paint shops in Germany let us advise you and make a free offer. we look forward to your call or uchstermine are unfortunately only possible with an appointment.

Condition: used, 2 units available See also my other offers in the field of automotive measurement technology Bandwidth up to 100 kHz Reliable voltage measurement in DC high-voltage systems Galvanically isolated high-voltage divider Nwjdpfxswm Imxe Ahvod For applications in electric and hybrid vehicles Direct connection to SENS modules Approved application areas according to CAT I and CAT II

Condition: used, 2 pieces available Nsdpfewm Inpjx Ahvewd See also my other offers in the automotive measurement technology category

Condition: like new (used), functionality: fully functional, Manual lever profile steel shear with spare blade Njdpfx Aexbfxrjhvewd

Condition: used, mileage: 788,500 km, power: 335 kW (455.47 HP), first registration: 01/2018, gearing type: automatic, emission class: euro6, Equipment: air conditioning, -Peterbilt 579 -First registered: January 9th, 2018 -Paccar engine -455 HP -Euro 6 -10-speed Eaton Fuller automatic transmission -Mileage approx. 788,500 kilometers Nwodpfx Ahop Nny Ujvsd -Disc brakes -Rear axle, air-suspended -Adjustable fifth wheel -Axle lock -Aluminum rims -Aluminum tanks -Full fairing -Adaptive cruise control with brake assist -2x sleeping berths -2x seats, air-suspended -Refrigerator -Cruise control -Air conditioning -Adjustable multifunction steering wheel -On-board computer -Digital tachograph -Radio -Brake system converted to EC standard -24 volt light & ABS system for trailer operation -German registration The vehicle has just arrived and is currently being converted. But it can be viewed at any time. Price: 87,800.00 ¤ net You can find more pictures on our homepage: Subject to errors and prior sale Certified according to ISO 9001: 2015 Every imported truck is converted in our workshop according to the EC guidelines, e.g. the braking system. We also refine the vehicles according to customer requirements. Examples: Individually manufactured stainless steel parts, interior fittings, paneling (leather, fabric), etc. PTO and ADR approvals are also possible in-house. If your dream vehicle is not included, contact us. We will then import your dream truck (all manufacturers, used or new). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV approval, AUv