Used Pet for sale (2,458)

Condition: ready for operation (used), Condition Used Stock Number 57755 This listing is for a Hirschman pipetus with charger station    Prodpfx Ajwdbpnegwec The unit is in full working condition and is ready for immediate release For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated colour display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Prjdpfxjqx Sz De Agwoc

Condition: used, functionality: fully functional, The Multifreezer cooling tunnel is an innovative solution for fast, efficient cooling of food products. Thanks to its advanced technology, it maintains food quality and freshness while optimizing the production process. In fact, this tunnel uses a state-of-the-art cooling system that guarantees a controlled, uniform temperature throughout the process. What's more, the Multifreezer type T can be easily adapted to the specific needs of any company. Its modular design makes it easy to integrate into various production lines, offering great flexibility. What's more, its wide conveyor belt enables it to handle a high volume of products, thus increasing production capacity. It also ensures optimized energy consumption, helping to reduce operating costs. By choosing the Multifreezer Tunnel Cooler, companies benefit not only from exceptional performance, but also from reliable, long-lasting equipment. As a result, it represents a sound investment in improving operational efficiency and profitability. In short, this innovative cooling solution meets the most demanding requirements of the food industry, while guaranteeing optimum quality of finished products. Prodpfxeu Iu Tgo Agwsc Technical specifications: Multifreezer type T Electrical power: 30 kW Belt width: 60 inches (1524 mm ± 5 mm) Continuous temperature = -46°C to 93°C Cooling capacity: 80 kW Voltage: 380 V three-phase plus earth + neutral Frequency: 50 Hz.

Condition: ready for operation (used), Condition Used Stock Number 44863 Prsdpou Hu U Isfx Agwec This listing is for a Gilson Pipetman Liquid Handling Device. The unit is in full working condition and is ready for immediate release. The Gilson Pipetman Liquid Handling Device is a well-known, precision liquid handling device commonly used in laboratories for transferring small amounts of liquids. It is a type of micropipette used to measure and dispense a specific volume of liquid, typically in the range of microliters (μL) to milliliters (mL). The Pipetman series is renowned for its accuracy, reliability, and ease of use. Features:Adjustable Volume: The Pipetman is designed to allow the user to set and adjust the volume it will dispense, which provides flexibility for a variety of tasks. It typically has a volume range from 0.1 µL to 10 mL depending on the gle Channel: The standard version is a single-channel pipette, meaning it is designed to handle one sample at a time, although multi-channel models are also available for higher onomic Design: The Pipetman is designed with ergonomics in mind, making it comfortable to use for long periods, which is important for minimizing hand strain and improving cision and Accuracy: The Gilson Pipetman is known for its high precision, with many models offering accuracy and precision to within a small percentage of the desired volume, which is crucial in scientific ability: The Pipetman is robust and can withstand frequent use, making it ideal for laboratory or-Coding: Pipetman models often use color-coded tips that correspond to different volume ranges, making it easier for users to select the correct pipette and tips for their needs.

Condition: ready for operation (used), machine/vehicle number: 5167, Condition Used Stock Number 412970 This listing is for a Tecan SPE Te-VacS-B Vacuum System. The unit is in full working condition and is ready for immediate release. The Tecan SPE Te-VacS-B is an advanced vacuum regulation module designed to streamline and automate cartridge-based filtration and SPE processes, enhancing laboratory efficiency and accuracy. Key Features: Automation: The system automates the entire process of cartridge-based filtration and SPE, reducing manual intervention and improving reproducibility. Software-Controlled Vacuum Regulation: Provides precise control over the vacuum levels through user-friendly software, allowing for adjustments tailored to specific applications or samples. Prodpfxovi Anqs Agwjc Compatibility with Tecan Platforms: Designed to seamlessly integrate with Tecan pipetting platforms, enhancing existing workflows within the Tecan ecosystem. Versatile Integration: Offers enhanced flexibility by being compatible with non-Tecan vacuum separation manifolds, external vacuum pumps, or house vacuum systems, making it adaptable to various laboratory setups. Dual Vacuum Positions: Equipped with two separate vacuum positions and distinct vent lines for each channel, effectively preventing aerosol cross-contamination between samples, which is critical for maintaining sample integrity. Benefits: Increased Efficiency: Automating the SPE processes decreases the time and effort required for sample preparation, allowing researchers to focus on data analysis rather than manual tasks. Enhanced Reproducibility: With software control and precise vacuum regulation, the system ensures consistent performance across multiple runs, vital for high-quality results. Flexible Implementation: The ability to work with various vacuum sources and platforms makes it a versatile addition to any laboratory, accommodating different workflows and instruments.

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 100mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX Powerful wood chipper for branches up to 10cm in diameter. Extremely robust and compact. -- 196cc petrol engine with 5.6 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- Compact size -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL LIGHTWEIGHT The SCHORR RR100THX wood chipper impresses with its practical size, which maximizes flexibility when used in different locations. Thanks to its width of just 600 mm, the shredder fits easily through any standard door and can therefore also be used in places that are difficult to access (e.g. gardens). With an operating weight of 93 kg in combination with the two tubeless wheels, the shredder is easy to store and transport, even in confined spaces. RELIABLE IN EVERY RESPECT The high-quality cutting unit of the shredder has 2 blades and 1 counter blade made of high-strength steel. The material of the blades is designed for the special requirements of the shredder, it is extremely resistant and at the same time not brittle. The low feed height of 910 mm makes it easier to feed in the wood and thanks to the large feed hopper, you save time by processing large quantities quickly. HIGH LEVEL OF SAFETY AND EASE OF USE Pedpfjt Ivaasx Agwsrc Important safety features such as an emergency stop bar on the handle or the central emergency stop button maximize work safety. The integrated catch guard in the feed hopper prevents small pieces of wood from flying out of the hopper. The motor is also equipped with a low oil sensor. This prevents the engine from starting if the oil level is too low to avoid serious engine damage. The ergonomic design of the controls and easy access to maintenance areas complete the practicality of the wood chipper. LOW FUEL CONSUMPTION A major advantage of the efficient engine is the low fuel consumption and the associated reduction in environmental impact. The 196 cc engine also produces less noise than larger machines, making this shredder ideal for residential areas. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR100THX Drive type: V-belt 13x860Li Max. Branch thickness: 100mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 93kg Basic dimensions Total length: 1450mm Overall width: 600mm Total height: 1080mm Discharge angle: 360º Engine capacity Displacement: 196ccm Power max: 4,1kW / 5,6PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 100MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Year of construction: 2020, condition: good (used), functionality: fully functional, Great offer! Extruder Farmet FE1000 Clever Max, ideal for texturate/pet food/ fish food/grain. With Clever command box, including PLC, frequency changer, touchscreen, SS steam conditioner and cutting head. Predpfx Agexfcwmjwsc Complete solution for manufacturing various products/mixtures. Capacity 1.000-1.800 kg/h Extruder was working for 2 years, the rest of accessories never used!

Condition: excellent (used), functionality: fully functional, overall weight: 23 kg, Year of construction: 2016, machine/vehicle number: 20161500027, Cutting of openings up to a maximum depth of 400 mm is possible in several work steps. Suitable for creating cut-outs and channels in concrete or masonry. Optimized engine performance thanks to efficient cylinder design, digital ignition system, and X-Torq engine technology. Cutting disc pair with very stable core and excellent cutting performance. Predpfx Agexnm Ihswec

Condition: used, Hose Reel with LPG Gas Hose Type: BT 6.30.25SA368 Hose Unwinder, Hose Rewinder Medium: LPG Liquefied Petroleum Gas EN 1762 Hose Inner Diameter: 25 mm = 1" Hose Outer Diameter: 38 mm Hose Length: 30 meters Working Pressure: max. 25 bar Hose Connections: 1" Operating Temperature: -40° to +70°C Reel Diameter: 650 mm - ELAFLEX LPG hose according to EN 1762, also suitable for natural gas - Hose is automatically retracted by spring force - Locking mechanism with 2 locking positions per revolution Dimensions (L x W x H): 750 x 600 x 750 mm Prsdpsxf Uwfsfx Agwsc Net weight: 95 kg Very good condition 2 units available, price per unit

Condition: excellent (used), Opportunity! Previously owned by the German government, we are pleased to offer this top-quality liquid handling system, type "Genesis RSP 100/8," from the global brand TECAN, as a complete system with all accessories, from a single source. The fully automated Genesis RSP 100/8 pipetting robot system is one of the most reliable systems available today and is an indispensable part of any laboratory. All components are in excellent condition; the system has never been used industrially and has seen very little use. All devices are in excellent optical and technical condition and show no significant damage – see pictures. The extensive range of accessories provides you with a complete system that you can start using immediately. Scope of delivery: - TECAN RSP 100/8 Liquid Handling System - Eppendorf Gradient PCR Mastercycler - Olympus DP10 Digital Microframe Camera for Droplet Size Monitoring - GeSim 1.2 Nanoplotter with Housing - Diluter 4 - NPC 8 Software - Gemini v4.2 Software - Cables, manual, power supplies, and small parts - Various pipette tips in various sizes (2 boxes containing approximately 10,000 pieces) Dimensions: (D) x (H) x (W): 78 x 94 x 106 cm Weight: approximately 145 kg Shipment will be made within three business days after receipt of payment by insured freight forwarder. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and two pallets, is approximately 250 kg! Pedpswltr Rsfx Agwsrc This sale is exclusively for businesses; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 112.0012, drive type: Electric, GEMATEX carpet shearing machine Podjxk T Imspfx Agwerc Type 6712/G-2 4 m shearing width Year of manufacture: 1999 2 heads With brush unit With metal detector Machine is complete, ready for production Made in Germany

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 17 h, ✅ New & in stock ✅ Carbide teeth ✅ 420 cc ✅ 230 mm ✅ Shipping available Powerful shredder in top condition for sale! Prsdjwh Rnnspfx Agwec The unit is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22 hours Year of manufacture: 2025 SCHORR TREE STUMP GRINDER RR150BSF Clear your garden of annoying tree stumps – quickly, efficiently, and effortlessly with our powerful tree stump grinder. The simple and clean solution for a well-maintained and beautiful property! -- 420cc gasoline engine with 12.4 HP -- Precision milling head with 8 carbide teeth -- With parking brake -- With transport handles -- Highly user-friendly -- Super compact design - easy to store -- Extremely robust and reliable EQUIPMENT / FEATURES PRECISE MILLING HEAD The RR150BSF tree stump grinder features 8 carbide milling teeth, which are ideal for particularly demanding tasks. The grinder enables fast and precise work, even on hard or petrified stumps. Removing the tree stump with our grinder eliminates the need for laborious rework. This saves both time and money on projects large and small. POWERFUL PERFORMANCE The efficient and powerful 420 cc four-stroke engine produces 12.4 hp and delivers sufficient power to effectively remove even large and deep tree stumps. The engine is particularly powerful and, in combination with the centrifugal clutch, offers consistent power delivery. EASY TO USE With ergonomically designed controls and intuitive operation, the stump grinder is easy to operate, even for users without extensive experience. Thanks to the two tubeless main wheels and the transport handle on the mudguard, the grinder can be easily transported to its destination. The parking brake also makes it easier to operate the grinder during work. HUGE TIME SAVINGS By using the grinder, you save a significant amount of time and effort compared to conventional removal methods (exposing the root, cutting through the root, loosening the stump, and removing the stump) – all with just a spade. For a tree stump with a diameter of 30 cm, someone with the appropriate experience and physical strength might need 4 to 8 hours; with the grinder, the job can be completed effortlessly in 30 to 180 minutes. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR150BSF Number of cutting teeth: 8 (4 double teeth) Max. cutting depth / cutting height: -2300 mm / +2540 mm Max. rotation speed: 2500 rpm Weight: 113 kg Basic Dimensions Overall Length: 1710 mm Overall Width: 750 mm Overall Height: 1160 mm Cutting Tooth Dimensions L x W x H: 108 mm x 71 mm x 38 mm Engine Displacement: 420 cc Maximum Power: 9.1 kW / 12.4 hp Starter: Recoil Our competent team is happy to answer any questions you may have about the SCHORR RR150BSF Tree Stump Grinder. We look forward to hearing from you and providing advice. Do you find the purchase price of a tree stump grinder too high? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, please contact us:

Condition: used, This listing is for the Rainin E4 XLS Electronic Single Channel Pipette The unit is in full working condition and is ready for immediate use Psdpfoxhf E Sox Agworc Large color screen with 360° trackball/joystick and carousel menu for easy navigation Multiple pipetting modes: Standard: e.g., basic, multidispense, mix Advanced: titration, dilution, fixed‑volume, reverse pipetting True Manual mode: real‑time control over aspiration/dispense speed Independently adjustable speeds for aspirate, dispense, and mix RFID-enabled for tracking service info, calibration, and protocols (supports GLP/GMP)

Condition: excellent (used), Year of construction: 2021, We offer a pipetting station with pipettes in perfect condition. CyBi-FeliX pipetting station with CHOICE Head, 8-channel Choice adapter 10-1000uL and 0.5-50 uL Year of manufacture: 2021 Brand: Analytik Jena Model: Cybio Felix Choice Personal collection from Gdansk (Poland, Poland) Pedpfx Ageumtkaswjrc

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-C cold water trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, stands, rear lights and reflectors, towing eye for 50 mm coupling, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min at 180bar | petrol engine: Honda GX690 17,7kW CTR-C 55/160 | 55l/min. at 160bar | petrol engine: Honda GX690 17,7kW Pjdpfx Aofdvkrjgwerc CTR-C 60/150 | 60l/min. at 150bar | Diesel engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD-reel: manual with max. 60 m. 1/2" hose (included) - Water supply reel: manual with 35 m. 3/4" hose - Water tank: 400 l - Options such as radio remote control, booster pump, warning light, working light, aluminium cover for hoses and accessories on request

Condition: new, functionality: fully functional, power: 1.7 kW (2.31 HP), fuel type: gasoline, color: yellow, overall weight: 24 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson Petrol Breaker BH 65* - NEW -! Weight: 24 kg, 2-stroke petrol engine WM 80c with 1.7 kW power, percussion rate 1,250 bpm. Other sizes available! Machine location: Warehouse D-46514 Schermbeck. *Transport trolley and chisels are shown for illustration purposes only and are not included in the scope of delivery. _____ Wacker Neuson BH 65 for sale | 2-Stroke Petrol Breaker | Wacker BH65 Demolition Hammer | Road Construction Petrol Breaker | Cordless Demolition Hammer | Handheld Petrol Breaker | Concrete Hammer for Constructions Sites | Wacker Hammer new | Buy Petrol Demolition Hammer | Cordless Site Hammer — Highlights & Advantages: Prjdow T U Tdopfx Agwjc ✔️ Autonomous demolition hammer – ideal for jobsites without electrical power supply ✔️ Compact & portable – only 24 kg weight ✔️ High impact rate with 1,250 blows/min ✔️ Low-maintenance WM 80 engine – designed for tough construction site conditions ✔️ Ready for use without compressor or electricity ✔️ Ergonomic & vibration-damped – operator-friendly ✔️ Made by Wacker Neuson – professional quality — Typical applications: -Road construction / pavement repairs -Concrete and asphalt demolition -Civil engineering & pipeline construction -Fiber optic installation -Fence foundations, breakthroughs, minor demolition work -Landscaping & horticulture -Municipalities, construction yards, equipment rental companies

Condition: new, Year of construction: 2021, Stihl lawn mower 53 cm petrol RM 655.1 VS The STIHL RM 655 VS petrol lawn mower is a real powerhouse, and not just because of its durable aluminum housing. With its Vario drive and a cutting width of 53 cm, it is predestined for maintaining large areas. The central seven-stage cutting height adjustment allows you to select the lawn height from 25 to 85 mm. To make your work easier right from the start, its engine is equipped with the ReadyStart function, which allows it to start safely. When mowing the lawn, the speed of the powerful engine always remains constant, even when changing speed, and its mono-comfort handlebar ensures easy handling. Podpfx Aotvf R Eogwjrc The blade brake clutch of the RM 655 VS, which disengages the mower while the engine is running so that short breaks in mowing do not involve restarting the mower, should also be emphasized. The folding grass catcher with a capacity of 70 liters and fill level indicator is easy to empty. With this petrol lawn mower, you are choosing a reliable gardening companion. Technical data: - Aluminum housing with scuff plates - Guaranteed sound power level LWAd [dB(A)]: 98 dB(A) - Weight: 50 kg - Grass catcher volume: 70 l - Engine capacity: 173 cm³ - Folding grass catcher with fill level indicator - Comfort handlebars - Smooth-running wheels - Blade brake clutch (BBC) - Engine with easy-start system (ReadyStart) - Engine type: HD775 OHV SC series - Mulching function & multi-blade - Rated speed of working tool: 2800 rpm - Rated power: 2.6 kW / 3.5 hp - Lawn area: up to 2500 m² - Cutting width: 53 cm - Cutting height: 20-85 mm - Super soft grip - Uncertainty KpA [dB(A)]: 2 dB(A) - Vario wheel drive - Vibration guide bar ahw: 3.8 m/s² - Vibration uncertainty K: 1.9 m/s² - Central cutting height adjustment The lawn mower is new and unused. It has only been in our showroom and has minor signs of storage. Only the lawn mower is supplied without batteries and without charger! You will receive an invoice with VAT shown. Payment only by bank transfer - NO PAYPAL! Shipping possible for an extra charge. We only ship within the EU. No shipping outside EU.

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Carbide teeth ✅ 420 ccm ✅ 230mm ✅ Shipping possible SCHORR STUMP GRINDER RR150BSF Clear your garden of unwanted tree stumps - quickly, efficiently and effortlessly with our powerful stump grinder. The simple and clean solution for a well-kept and beautiful property! -- 420cc petrol engine with 12.4 HP -- Precision milling head with 8 carbide teeth -- With parking brake -- With transport handles -- High user-friendliness -- Super compact design - easy to store -- Extremely robust and reliable EQUIPMENT / FEATURES PRECISE MILLING HEAD The RR150BSF stump grinder has 8 carbide cutting teeth, which are ideally suited for particularly demanding tasks. The cutter enables fast and precise work, even on hard or petrified stumps. Removing the tree stump with our cutter means no more tedious reworking. This saves both time and money on large and small projects. POWERFUL PERFORMANCE The efficient and powerful 420 cc four-stroke engine delivers 12.4 hp and provides enough power to effectively remove even large and deep tree stumps. The engine is particularly powerful and, in combination with the centrifugal clutch, offers constant power output. SIMPLE OPERATION With ergonomically designed controls and intuitive controls, the stump grinder is easy to operate, even for users without extensive experience. Thanks to the two tubeless main wheels and the transport handle on the mudguard, the stump grinder can be easily transported to its destination. The parking brake also makes it easier to operate the tiller during work. ENORMOUS TIME SAVING Compared to conventional removal methods (exposing the root, cutting the root, loosening the stump, removing the stump), using the cutter - and all with just a spade - saves you an enormous amount of time and energy. For a tree stump with a diameter of 30 cm, people with the appropriate experience and physical strength may need 4 to 8 hours; with the cutter, the work is easily done in 30 to 180 minutes. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150BSF Number of cutting teeth: 8 (4 double teeth) Max. Milling depth / milling height: -2300mm / +2540mm Max. Max. rotation speed: 2500 rpm Own weight: 113kg Basic dimensions Overall length: 1710mm Psdpfxst Ivnwe Agwjrc Overall width: 750mm Total height: 1160mm Cutting tooth dimensions L x W x H: 108mm x 71mm x 38mm motor Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR BAUMSTUMPFFRÄSE RR150BSF. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a stump grinder too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us:

Condition: ready for operation (used), Year of construction: 1995, A carpet tile cutting machine is available. Working width: 2000mm, machine dimensions X/Y/Z: approx. 2100mm/4500mm/2500mm, weight: approx. 3000kg. The machine cuts carpeting into 4 square tiles using automatic recognition by cameras (year of manufacture: 2005). The machine was part of a larger system and is therefore no longer able to run independently. In order to be able to run independently, the system must be completely rebuilt/reprogrammed in terms of PLC technology. Documentation available. On-site inspection is possible. Prsdpeufqghofx Agwjc

Year of construction: 2025, condition: new, Weed brush with protective shield for petrol brushcutters Innovative set for professional and safe weed removal, suitable for petrol brushcutters, manufactured in the Netherlands. The complete set consists of a brush (1) and a protective guard (2) – a description of the set components is provided below. When placing an order, please specify the exact model of your petrol brushcutter in order to select the appropriate adapter for mounting the guard. Retail price for the set (brush + guard + 1 selected adapter for your brushcutter model), including delivery within Poland, is €950 net. Full set description: Prodpow Rv Azsfx Agwec (1) ECOBrush – Steel brush for petrol brushcutters, designed for professional applications. Rugged steel, durable construction, improved safety, and extended service life thanks to the changed brush angle and only three ultra-strong bundles. Easy and quick bundle replacement, compatible with all brands and types of brushcutters (can also be ordered as a standalone brush without guard). Weight: 1.4 kg. Delivered with 6 replaceable bundles (see video link below), bundle length: 16 cm. You may use 2, 3, 4, or 6 bundles on the head; under normal working conditions, 3 bundles are recommended. The brush operates with brushcutters from 2 HP – recommended to use 3 bundles; for models above 3 HP, 4 or 6 bundles can be used. The ECOBrush head is easy to install, eco-friendly, and efficient. Bundles are set at a slight angle, which makes operation ergonomically superior to conventional brush heads, where bundles are mounted at a 90° angle. (2) EASYPROTECT guard for protection against stone impact and debris for the ECOBRUSH brush head. Supplied complete with three support wheels. For efficient, economical, and safe weed removal, the EASYPROTECT guard provides optimal protection against stones and other ejected material. A part of the guard can be lifted and locked, enabling precise weeding along walls, curbs, or barriers. Using EASYPROTECT expands the operating possibilities while significantly reducing the risk of injuries, damage to vehicles, and potential compensation claims. The system ensures operator and bystander safety, making it suitable for work in busy and car park environments (protects cars from damage). The ideal solution for landscaping, agriculture, municipal services, companies, and individual customers. Quick installation in just a few steps! Weight: 11.5 kg, dimensions: 56 x 22 cm. Included in the price: the appropriate adapter for the following petrol brushcutter brands: HUSQVARNA 28 mm, 34 mm STIHL FS 260, 360, 410, 460, 490 and STIHL FS 550 as well as STIHL FS 130, 310, 350, 450, 480 Also for example: ECHO SMR 350, ESL / ESU, ES 410, 510, 580 Please always specify the make and model of your machine in your inquiry so that we can provide the correct adapter for mounting the guard to your brushcutter shaft. Set of 6 replacement steel bundles: 40 € net Set of 6 replacement PP or nylon weed-removal bundles for sensitive surfaces: 40 € net

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), Pressure washer PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Delivery rate: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31PS/23kW, 3400 1-min - Dimensions: 1.000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces industrial wheels 350mm - Electric starter - Operating hours counter - Stepless pressure valve made of stainless steel with EASY-START Pedjfdz Eyspfx Agwsrc - Large water filter with easy to maintain filter cartridge - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power B 21/500 | 21 l/min 500 bar Easy Power B 15/700 | 15 l/min 700 bar

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Psdpfx Asd H Dr Ssgworc Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed ​​1400 rpm Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Weight 70 kg Visit our shop in Erlangen. We have a large selection of new and used compressors.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 22 h, ✅ Used & in stock ✅ Up to 100mm branch thickness ✅ Shipping available Powerful wood chipper in top condition for sale! The device is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22h Year of manufacture: 2025 SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX Powerful wood chipper for branches up to 10cm in diameter. Extremely robust and compact. -- 196cc gasoline engine with 5.6 HP -- Self-feeding, no additional pressure required -- 360° discharge -- Compact size -- Highly user-friendly -- Extremely robust and reliable FEATURES / FEATURES POWERFUL LIGHTWEIGHT The SCHORR RR100THX wood chipper impresses with its practical size, which maximizes flexibility when used in different locations. Thanks to its width of just 600 mm, the chipper fits easily through any standard door and can therefore be used even in hard-to-reach places (e.g., gardens). With an operating weight of 93 kg, the chipper, combined with its two tubeless wheels, is easy to store and transport, even in confined spaces. RELIABLE IN EVERY RESPECT The chipper's high-quality cutting unit features two blades and one counter knife made of high-strength steel. The blade material is designed to meet the specific requirements of the chipper; it is extremely durable yet not brittle. The low filling height of 910 mm facilitates wood feeding, and the large hopper saves you time by quickly processing large quantities. HIGH SAFETY AND EASE OF USE Important safety features such as an emergency stop bar on the handle and the central emergency stop button maximize work safety. The integrated catch guard in the hopper prevents small pieces of wood from flying out of the hopper. The engine is also equipped with a low-oil sensor. This prevents the engine from starting if the oil level is too low, thus preventing serious engine damage. The ergonomic design of the controls and easy access to maintenance areas complete the practicality of the wood chipper. LOW FUEL CONSUMPTION A major advantage of the efficient engine is its low fuel consumption and the associated reduction in environmental impact. The 196 cc engine also produces less noise than larger machines, making this shredder ideal for residential areas. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model number: RR100THX Drive type: V-belt 13x860Li Max. branch thickness: 100mm Chopping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Weight: 93kg Basic dimensions Overall length: 1450mm Overall width: 600mm Pjdpjwh Rmdofx Agwerc Overall height: 1080mm Discharge angle: 360º Engine Displacement: 196ccm Maximum power: 4.1kW / 5.6hp Starter: Recoil starter Our competent team is happy to answer any questions you may have about the SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX. We look forward to hearing from you and providing advice. Is the purchase price of a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing options, please feel free to contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, Handheld petrol post driver by CHRISTIE, professional-grade pile driver. Premium brand. Made in Australia. The CHRISTIE handheld petrol post driver, manufactured in Australia, is designed for driving posts and piles, suitable for all types of square or round profiles from 84 mm to even 150 mm in diameter. Please always specify which adapter you need; we will provide the appropriate one. This post driver is used for installing posts for PV panel installations, road barriers, pipes, profiles, road signs, fencing, etc.—ideal for intensive professional applications. Super lightweight yet extremely durable and ergonomic. Years of experience from Australian engineers in pile driving are applied in this best-in-class handheld post driver. Advantages of the CHPD78 model: - Portable: no need for hoses or generators, only 14.5 kg with interchangeable guide parts up to 16 kg. - Ideal for steep or hard-to-access terrain. - Significantly reduced physical effort compared to conventional methods. - Can be used all day without causing excessive operator fatigue. - Drives up to 500 posts on a single litre of petrol. - Supplied in a compact plastic case. - Shock-absorbing handles. Please provide information about the profiles, posts, and materials to be driven so we can select the suitable sleeves for you. Technical Specifications: Weight: 14.5 kg Impact energy: 26 Joules Blows per minute: 1720 Power: 1.1 kW (1.3 HP) at 7000 rpm Engine: 4-stroke, overhead camshaft, HONDA GX35, 4T Petrol Accelerator trigger on handle Fuel consumption: 0.71 l/hour Starting system: recoil starter Noise level (hearing protection required): > 100 dB Retail price list – reference drawing for price list positions. All prices are net. Petrol post driver, CHRISTIE CHPD78 model, basic model supplied with Ø 84 mm guide sleeve: 3,300 EUR net 1. Extended handles (60 cm) for gripping the driver: 400 EUR net Prodpfsw Rvvhox Agwoc 2. Aluminium adapter, choice of Ø 100/107 or 150 mm: 190 EUR net Aluminium square adapter 90 mm x 90 mm: 190 EUR net 3. Aluminium reducer for standard Ø 84 mm guide, adapter for posts Ø 10–50 mm: 110 EUR net 4. Teflon reducer for aluminium guide for posts Ø 50–107 mm: 140 EUR net 5. Set of aluminium adapters for aluminium guide for posts Ø 107 mm, plus reducers for Ø 95, 85, and 75 mm: 400 EUR net 6. Wooden transport case with handles: 220 EUR net 7. Service kit with gaskets, spare spark plug: 90 EUR net Items 8, 9, 10 for soil sampling attachments—price on request.

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Flow rate: 32 l/min. - Engine: Honda GX390 petrol 8,7kW - dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Pressure gauge - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HP hose 3/8" + 10 m HP hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles - Gun with wash lance and flat spray nozzle Pjdpfx Aogigqxjgworc The CJ-2B is a professional mobile pressure washer ideal for cleaning and unclogging pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages from house connections, cesspits, cisterns and industrial waste. The powerful Honda engine with a power of 8.7 kW and the Comet TW Premium pump with speed control guarantee maximum performance and reliability over time. This machine represents the optimal solution for professionals looking for an efficient and powerful machine, able to face the most demanding work situations thanks to the robust steel frame and the large pneumatic tyres.