Used Pet Bottles Road for sale (4,319)

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 Redpfoxm Rwqsx Ahvjp 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: used, Year of construction: 2006, Overview  This complete filling line for non-returnable PET bottles was manufactured 2006 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line and dedicated to produce fresh milk. The line is designed for milk production, handling up to 9,000 b/h and is in a good condition. The equipment becomes available as the seller dediced to commit the milk production to an external company and continue only the cheese production in the factory. Technical Information Product: Fresh Milk Container Material: PET Bottle Format: 1,0 L Nominal Speed: 9.000 BPH Neck Finish: 38 mm Label Type: OPP Rollfed Packaging: 16 bottles per crate Pallet Type: Europallet 800 x 1200 Scope of Delivery  Blowing Machine | Krones | Contiform S8 | 2006 Preform Tipper | TM | KPT | 2012 Air Conveyors (~100 m, 9 fans) | Krones | AirCo | 2009 Filling Monoblock (Neck Handling, 32 valves) | Krones | Volumetic | 2006 Capper (8 heads) | Krones | 2006 Ink Bottles Marker | VideoJet | 2006 Labelling Machine | Krones | Contiroll | 2004 Case Packer | CMT | IFL3T | 2004 Palletizer (Fanuc M-410 Robot) | Elettric 80 | 2009 LGV Pallet Transport Shuttle (Optional) | Elettric 80 | 2009 Rsdpfxsym D Uks Ahvjp

Condition: used, Year of construction: 2005, Capacity of the bottle filler: 10000 PET bottles/h with 485 ml Flaschen Rodpfx Aovcqq Hehvsp Features: Open input vessel, closed vessel with set-up-caroussel, format parts for 500 g and 285 g PET bottles

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Redpfjkucxljx Ahvsp Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: used, Set of machines for the production of beverages in 5-liter PET bottles. Redeu I N Npjpfx Ahvop 1) RIVI 24 carousel filling machine - machine modernized in 2013 - previously used for 1.5 L bottles (24 fillers) - number of filling heads: 12 pcs (for 5 L bottles) - capacity: approx. 1800 bph 5 L 2) ZALKIN 4 PET bottle capper - number of closing heads: 4 pcs - capacity: approx. 2000 bph Used machines, functional at the time of dismantling. Complete original technical documentation. Other offers also include semi-automatic blow molding machines for 5 L PET bottles, compressors and bottle labelers. .

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Rodpfx Ahjwa Rhrsvsp Technical condition: used machine, starts up, program is functional

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Rsdpfx Ahovddkvjvsp Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: used, Water or liquid filling line for PET containers – capacity approx. 6000 bph (2.0 L) Currently, the machines are configured for 2.0 L PET bottle formats (other formats not included). It is possible to adjust to smaller or larger PET bottles by preparing the appropriate equipment. The line includes: - Nagema BF-60 filler with 12-head bottle capping unit - Plate conveyors for PET bottles - Nagema saturator, type KOMI 160 - Spomasz wrap-around paper labeller - Bottle packer with control cabinet for creating multipacks, e.g. 2x3 - Electric shrink oven + cooling fan for multipacks - Pallet wrapper Rjdpfewny Hgjx Ahvep The last photo shows the layout and dimensions of the machines. Technical condition: the machines were operational up to the end of production in 2018. Inspection and maintenance are recommended before resuming production. Optionally, a SIDEL SBO4 blower, which was last in operation on this line, can also be purchased.

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Redpfeutni Rjx Ahvop Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data Capacity: 212 ml round plastic: up to 2,700 bph 250 ml oval plastic: up to 2,700 bph 1,000 ml round plastic: up to 900 bph 1,000 ml oval plastic: up to 900 bph Application: Glass & PEHD (plastic) Neck finish: Screw-on caps Ø 30–40 mm Twist-off caps Formats: 212 ml, 250 ml, 1,000 ml Scope of Delivery  Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min Conveyor | Breitner | TP 6052 | 2006 | — Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min Rotary Sorter | Breitner | DS 8003 | 2006 | — Feeder | Breitner | SFB 8001 | 2006 | — Conveyor | Breitner | TPK 6042 | 2006 | — Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min Conveyor | Breitner | TPE 6032 | 2006 | — Redpsyighijfx Ahvsp

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Rodeyhc S Ropfx Ahvop Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Hot washers with recirculation systems Sink-float separation stage Post washer and recirculation system (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. - Filler / capper model Weighblock 16/1440 6/540 P. - Labeller model Extra HM 4/720 Sa1 E1. Redpfx Aeyhc Sdohvep - Packer model Acepack 2/4T. - Carton erector model Formapack H. - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. - Coders, handle applicators, elevators and conveyors. - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Condition: used, Year of construction: 2020, machine/vehicle number: M305, Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materials: PET, HDPE Product types: Liquid detergents, liquid soap (suitable for non-carbonated, non-aseptic applications) Filling technology: Volumetric piston filling No. of filling valves: 24 Nozzle type: Mobile nozzles Max fill volume: up to 1 L Capper: 8-head pick-and-place pneumatic spindle capper Cap type: Plastic screw caps (one cap size currently tooled) Machine rotation: Clockwise Nominal speed: up to 5,000 bottles/hour (depending on product, bottle, and closure) Isobaric: No (non-pressurized filling) Aseptic: No Integrated rinser: Not included Filling Section Bottle infeed screw Central product tank with magnetic float switches 24 pneumatic cylinders, upper plates, lower plates Internal plates with stainless-steel/Viton sealing Opening/closing valves per station Capping Section 8 pneumatic capping heads with spindle screwing system Pick-and-place cap transfer Vibratory cap bowl (one cap size) Cap cup and cap chute (one cap size) Automatic cap elevator Mechanical & Structural Frame: Painted iron External panels: Stainless steel Protective hood: Enclosed with doors and safety devices Rodpfxsyhb R Sj Ahvsp Advanced Automation & Control Systems Pneumatic control panel for filler and capper actuation Electrical panel with CE-compliant components Wiring diagram included for streamlined commissioning Magnetic level control in product tank for stable filling Production Line Integration Capabilities This monoblock integrates seamlessly into second-hand used bottling line configurations for industrial packaging and beverage production of still, non-pressurized liquids. Its clockwise carousel rotation, bottle infeed screw, and cap-handling system allow straightforward connection with upstream conveyors, depalletizers, blow molding machines, and downstream labellers, inspection systems, and secondary packaging. Upstream compatibility: Blow molding machine, bottle unscrambler/depalletizer, conveyors Downstream compatibility: Labeller, inspection/quality control, packer/shrink-wrapper, palletizer Changeover scope: Supplied with 1 bottle format and 1 cap format; additional formats can be engineered on request Machine Condition &...

Condition: used, Year of construction: 2000, machine/vehicle number: LC348, Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Redpfx Ahoyhbzdevsp Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth It has complete technical documentation Required space for equipment: 600 m2 Required installed power (equipment, compressors, refrigerators): 495 kW The Used Filling Line For Edible Oil In PET can be seen in full production function until December 15, 2022

Condition: used, Year of construction: 2019, machine/vehicle number: LC591, Technical Specifications & Performance Data This complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments. Redpfxsyhbibj Ahvsp Production speed: up to 8,000 bottles per hour Compatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0L Containers: PET and Glass bottles Main filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping heads Blow molder: Easy Blow 4L (4,200 bph nominal) Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bph Pack & handle application: SMI LSK 30 T Ergon shrink wrapper, SMI Pack HA-25 SX handle applicator Pallet logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; auxiliary manual wrapper Process & utilities: GEA pasteurization station HTF 3000PIN/19; GEA CIP station; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G boosters) Inspection & coding: FT System control for volume/cap/label; Hitachi UX printer Advanced Automation & Control Systems The line features modern automation and quality assurance for stable operation and repeatable product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure compliance and traceability. PLC/HMI: PLC installed for centralized control and recipe management Inspection: FT System for volume, cap presence/position, and label verification Electrical: 400V, 50 Hz, 16A reference (component level) Coding: Hitachi UX inkjet printer for date/lot marking Changeovers: Designed for multiple bottle formats across PET and glass Safety: Standard guarding and emergency-stop circuits across stations Production Line Integration Capabilities Built for flexible beverage production, the line integrates upstream preform handling and blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors provide smooth bottle transport and accumulation. Upstream: Preform conveyor and hopper, Easy Blow 4L blow molder Conveyors: Vetromeccanica Eolo air and line conveyor systems Format flexibility: 0.33L to 2.0L across PET and glass End-of-line: Shrink packaging, handle application, palletizing, and pallet wrapping Utilities integration: Chiller, steam boiler, compressors, air tanks, water treatment Machine Condition & Maintenance History The used bottling line remains in production and can be started during an on-site visit for demonstration. Manuals an...

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Rsdju Thpnjpfx Ahvep Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, machine/vehicle number: LC594, Technical Specifications & Performance Data This complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow molder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 clamps, 1 water treatment Filler: 60 isobaric valves Redpfx Ahsydn A Hevsp Capper: 10 heads Premix/Mixer: Sidel-Alsim, 30 m³/h output Bottle dryer: ACI Labeling machine: Krones Contiroll, rotary, 15 stations, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Handle applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments. Production Line Integration Capabilities Designed for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish. Machine Condition & Maintenance History This second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label application at the stated throughput. Downstream packaging includes film-only shrink wrapping and automated handle application for multipacks, with automated palletizing and pallet w...

Condition: used, Year of construction: 2008, Overview  This complete PET water bottling line was manufactured on average in 2006 by European manufacturers including Siapi, Melegari S.p.A, P.E Srl, k, Comag, TMG, Domino and Atlanta. The line will remain in production until the end of June 2025, offering the possibility to see it live in operation. All equipment is in very good working condition with complete maintenance history, making it an immediately operable turnkey solution. Technical data  Capacity: up to 6,800 b/h for 0.5L bottles, up to 6,000 b/h for 1.5L bottles Formats: 500ml PET, 1500ml PET Neck finish: 30/25 Packing: 500ml bottles: 24-pack shrink film 1.5L bottles: 6-pack shrink film Bottle diameters: 203mm (0.5L), 317mm (1.5L) Equipment condition: very good, complete maintenance history available Scope of Delivery Blow molding machine: Siapi EA4 Filling machine: Melegari S.p.A Fill Jet 20/20/4 Labeling machine: P.E Srl 8T.540.1S.1E Shrink tunnel: k Tunnel 70S Shrink wrapper: k Nice Wrap35 SFUSO Handle applicator: Comag H 40/1 Palletizer: TMG Inkjet printer: Domino A200 Rsdpjwz H Ahofx Ahvop

Condition: used, Year of construction: 2017, Overview This PET filling line was manufactured between 1998 - 2017 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 10.500 - 18.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 10.500 - 18.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Kosme | 2017 Elevator preform | Kosme | 2017 Rinsing/Filling/Capping | Tekal | 50/70/12 | 1998 Inspection machine | Heuft | 2010 Date coder | Printer Laser | 2017 Labelling machine | Sidel | 2017 Packing machine | SMI | 2002 Palletizer | SIPA | 2011 Pallet stretcher | SIPA | 2011 Mixing- and carbonating unit | Adue | 2013 Beverage analyzer | Maselli UR21 | 2009 Conveyors for empty PET bottles | Silga | 2017 Conveyors for filled PET bottles | Silga | 1998                                                                                             Conveyors for trays | Silga | 1998 Rsdpfx Aox Rrdcshvop

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Labelling machine | Krones Contiroll | 2004 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009 Redpfx Ahjyb Tuisvep

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, mixing- and CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 8,000 bph at 1,5 l  Formats: 0,5 l and 1,5 l bottles Filling product: Water and carbonated soft drinks Closure system: Plastic screw caps Sport caps Packing: Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Scope of Delivery  Blow moulder: SIPA, year 2002 Compressed air generator: Kaeser, year 2002 Rinser/filler/capper: Procomac, year 2000 Number of rinsing nozzles: 24 Number of filling valves: 24 Number of capping heads: 6 Labeller: Futura, year 2000 For the labelling of opp labels with hot melt Inspection device: Logics & Controls, year 2000 For the control of fill height, capping and label Shrink packing machine: Krones TFS Variopack, year 2001 Handle applicator: Twinpack, year 2001 Tray labeller: Logopack, year 2001 Pallet stretcher: Born, year 2001 Palletizing unit: Levanti / Profipack CIP-unit: Corosys, year 2012 CO2-degassing unit: Corosys, year 2012 Rodpfxjwq Sfgj Ahvjp

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Redowh U Avopfx Ahvop

Condition: used, Year of construction: 2010, Overview The components of this PET filling line were manufactured between 1997 - 2014 by different European manufacturers. The line is designed for carbonated beverages such as lemonades and also suitable for water with CO₂. With an output capacity of 33.000 bph, it offers a complete solution from bottle blowing to palletizing. The equipment becomes available as the seller replaced it by more modern machines. Technical Data Capacity: 33.000 bph at 1,5l Format: 1,5l Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: regularly maintained, stopped   Preform kipper | Sidel | EBHS 2050 | 2010 Preform feeding system | Sidel | EBHS 2050 | 2010 Blow mold chiller | Trane | RTAC 185 | 2003 Blow molding machine | Sidel | SBO 20 Series 3 Universal | 2010 Air conveyor | Ling | – | 1996 / 2001 / 2003 Mixer | Krones | MS 45/2 | 1997 Filler | Krones | VKS 140 | 1996 Cap conveyor | Gassner | – | 1996 Capper | ALCOA | Kupi 30/1080 | 1996 Camera inspection system | Intravis | Crown Watcher SN 1729 / V10.115-5299 | – Bottle inspection | Krones | Checkmat FM-G | 1996 Bottle inspection | Krones | Checkmat E | 2003 Bottle conveyor | Krones | – | 1996 / 2003 Bottle drying system | ACI | – | 2009 Labelling machine | Krones | HS 720-18 | 2009 Date coding (bottles) | Videojet | Excel 170i Ultra High Speed | 1996 Empty bottle inspection | Heuft | Squeezer | 2009 Shrink packer | Hartness | Multi Packer / Film | 2009 Multipack conveyor | Krones | – | 1996 / 2001 / 2003 Handle applicator | Project | Progrip S70 | 2001 Palletizer | Ocme | Pegasus F450 | 2014 Stretch Wrapper | Robopac | Genesis | 2014 Stretch Wrapper | Robopac | Genesis | 2014 Redpjya Hn Hsfx Ahvsp

Condition: used, Year of construction: 2011, Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min. 120 mm, max. 300 mm Bottle height: 250-400 mm Direction of rotation: clockwise Power consumption: 3.5 kW Dimensions: 4,000 x 3,000 x 3,500 mm Weight: 2,500 kg Rotary labeling machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 Output: 3,000 bottles/hour Dimensions: 2,750 x 1,700 x 1,780 mm Weight: 3,500 kg Pallet wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 Capacity: 35 pallets/hour Type: Turntable Control system: PLC Max. Pallet weight: 2,000 kg Semi-automatic Dimensions: 2,439 x 1,500 x 2,580 mm Weight: 1,200 kg   Rjdsv E Haiepfx Ahvop

Condition: used, Year of construction: 2004, Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical condition, dismantled blow molding, filling and capping machine as a block system   Scope of Delivery Blow Molding Machine | KRONES | Contiform S08 | 2004 Compressor | Kaeser | only Booster grade | 2004 Filling/Capping | Krones| Mecafill VKP-PET 2880-80-113 | 10 capping heads | 2004 Mixer | KRONES MSF 24/2 | vacuum-assisted deaeration | Brixmeter | CO2-meter Velcorin | Burdomat II G | 2004 Bottle inspection | KRONES | Checkmat FM-G Fill height (underfill) and cap control Labelling machine | Krones| Unimodul 600-15 | 2004 Bottle inspection | KRONES | Checkmat E | Label Check existence | 2004 Date stamping | Excel 170i UHS | 2004 Shrink Packer | KRONES | Variopac FS-30 | 2004 Handle Application | Comag | H 40/2 | 2004 Palletizer | KRONES | Robot 3A Palletsafety | Lachenmeier Multi Flex 1 Rodpfxeyb Sa Do Ahvep