Used Panel Saw M Scoring for sale (40,565)

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Psdpfx Ajxyl U Rsdnjrd

Year of construction: 2000, condition: ready for operation (used), Technical Specification Max. Cutting Length 3300 mm This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine. Application Types Sawing (Wood) Prjdpfx Ajxyl Spjdned

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 1 - 1000 Top for Solid Wood - New machine - immediately available from stock Bitburg - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large safety hood Double roller carriage, 3,200 mm Scoring unit-ready Rip fence, cutting width 1,000 mm Angle/miter fence 3,450 mm, without length compensation Predsxyl Epopfx Adned Table extension/widening: Powder-coated surface Saw blade tilting range: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade diameter: 450 mm Display size: 15 inch Working table height: 910 mm Extraction port diameter: 80 + 120 mm Options included: M45102 Rip fence 1000 mm Digit_X Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, mileage: 24,031 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,830 kg, first registration: 08/2024, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, total length: 4,981 mm, total width: 1,924 mm, total height: 1,910 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special Equipment: Floor covering: passenger/cargo area wood (with anti-slip profile), vehicle keys (2), both folding, Opel Connect, tire pressure monitoring system, rear view camera with 180° surround view Additional Equipment: Driver/passenger airbags, electrically adjustable and heated exterior mirrors, onboard computer, brake assist, front double bench seat with storage compartment, driver assistance system: hill start assist (HSA), rear wing doors without windows, automatically dimming interior mirror, body/superstructure: panel van, body variant: vehicle length L2, closed cargo partition, adjustable steering column (steering wheel), headlight range adjustment, engine 1.5 L – 88 kW CDTI DPF, rear parking assist system, wheelbase 3275 mm, tire repair kit, low emissions according to Euro 6e emission standard, right sliding door, SCR system (AdBlue technology), steel wheels 7x16, 12V socket in luggage/cargo area, 12V socket in center console, black exterior door handles Prodexzxpdspfx Adnjd

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Panel saw Homag HPL 300 Year of production: 2016 Technical data: * Cutting width: 3800 mm * Rear loading with rotation group and side loading * Labelling unit * Touchscreen * 3 front tables 600 × 2000 mm with air cushion * 8 grippers Prodpfx Adsxzu E Ijned

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 542798, cutting length (max.): 4,200 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 355 mm, cutting height (max.): 80 mm, main saw diameter: 355 mm, total length: 6,470 mm, total width: 6,450 mm, overall weight: 5,300 kg, saw drive: 9,000 W, input frequency: 50 Hz, input voltage: 400 V, power: 10.1 kW (13.73 HP), air pressure: 8 bar, saw blade bore: 30 mm, year of last overhaul: 2013, Equipment: scorer, Very well-preserved MAYER PS 9 Z panel saw, upgraded in 2013 (new PC, new PLC, new software, new control panel) Panel Saw Model PS9Z ECO - 4200 - Feed speed continuously adjustable from 5 - 70 m/min, return 80 m/min. - Dust channel for connection to extraction system - Pressure beam with central suction pipe - Automatic cutting length adjustment via sensor technology - Saw carriage runs on hardened and ground round guides. The drive is via rack and pinion (no chain), ensuring uniform feed and enabling high travel speeds. - Quick-release device for main and scoring saw - Saw hood interlock and louvered safety guard on the pressure beam - Recesses for package clamp in the pressure beam to enable complete cutting of panels without offcuts - Automatic cutting height adjustment (2 stages) - Swiveling control panel - Completely enclosed machine, especially in the pressure beam area - Transparent louvered safety guard allows operator to view the cutting line - Turret stop on the saw carriage The machine is dust-tested and bears the GS mark (No. 951061) as well as the CE mark (No. 951062) Saw motor: 9 kW Saw blade: 355 mm Cutting height: 80 mm Saw blade projection: 105 mm Cutting length: 4,200 mm Voltage: 400 V / 50 Hz Scoring unit - Scoring unit with pneumatic lowering during return, scoring motor 1.1 kW, for 127 mm scoring blade, convex. Left angular table 2000 x 600 air cushion - Air cushion angular table, on the left facing forward 2000 mm long, 600 mm wide, with 2000 mm long angle stop rail Auxiliary table 2000 x 600 air cushion - 3 auxiliary air cushion tables facing forward, size 2000 x 600 mm Material pusher travel distance 4200 mm - Double-guided material pusher, driven by rack and pinion and AC servomotor, forward speed 25 m/min, return 60 m/min - Separate measuring system via precision measuring racks and rotary encoder, rear support table with 11 twin roller tracks - Cutting length: 4,200 mm - Travel distance: 4,200 mm Package clamp opening height 80 mm - Package clamp on the material pusher (opening height 80 mm) with double-fingered design Pressing device 20 - 1200, automatic - Lateral pressing device operates automatically - For workpieces from 20 to 1200 mm - Manual presetting to workpiece width required automatic edging device - Device for automatic approach to the edging position by the material pusher Predexy Rwqopfx Adnjd Electronic control and PLC updated to PC6200 in 2013: - New PC - New software - New PLC - New control panel Machine is operational and can be inspected/tested at any time. A forklift is available for loading.

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Pjdpfxovvkqge Adnord

Year of construction: 1994, condition: ready for operation (used), Control Unit Brand SIEMENS Model S5 This ANTHON CUTTING SYSTEM was manufactured in 1994. It features a Siemens S5 control system, a portal feeding system with suction crossbeam, and a saw carriage with scoring and main saws. Ideal for handling package heights up to 150 mm. If you are looking to get high quality cutting capabilities consider the ANTHON CUTTING SYSTEM machine we have for sale. Contact us for more information about this machine. Application Types Prsdpfjxyayzox Adnjd Sawing (Wood)

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Podpfx Aexyl Ecodnsrd Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Prjdpfowuz Irsx Adnsd

Condition: used, Year of construction: 2001, Used STRIEBIG STANDARD III type 6220A vertical panel saw maximum cutting area: 5300 x 2200 mm Prjdpoxyyh Eofx Adned blade diameter: 300 mm (min. 290) motor power: 4.4 kW motor speed: 4750 rpm CE compliant

Condition: good (used), Year of construction: 2003, Tilting table saw Altendorf F45 with ELMO IV-plus package, 2-axis scoring unit, 3m sliding table and Control-Plus control system Sliding table length: 3000mm Saw blade tilt from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Main drive motor: 5.5kW with automatic motor brake Operator panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain dimensions and grooves at both rip fence and crosscut fence Cut width compensation at rip and crosscut fence with tilted blade Podpjxw Ii Sofx Adnsrd 600 cutting programs Calculator function with result transfer to the corresponding axis Tool management Saw blade diameter up to 450mm Max. cutting height: 150mm Cutting width up to 1040mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence up to approx. 3210mm, electrically adjustable, automatic coupling of the second stop flap for large cutting widths Rip fence fold-down Extraction nozzles: 120 + 80mm Sliding carriage lockable Additional angle stop fence 2 used saw blades and one scorer included 2 riving knives 2-axis scorer unit, electrically adjustable while the machine is running 2 protective hoods 3 emergency stop switches Clipboard at control panel CE mark Machine shows signs of use. No cuts in the sliding table. Original paint (custom paint), touched up in some areas. Machine has 18,985 operating hours. It comes from a furniture factory and was clearly regularly serviced and well maintained. Condition as per original photos. A video of the machine in operation can be sent upon request. Dimensions approx. 3150 x 3750 x 1900mm (LxWxH). Weight approx. 1400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this supplier.”

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Predpfx Adevvkq Tonod Storage location: Nattheim

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Panel saw Giben Prismatic 2 SPT H.100 with rear loading Year of production: 2003 Technical condition: very good Pedpfx Adoxyq I Nsnjrd Technical details: 4500 mm wide rear loading panel saws with 7 panel feed clamps, side lay-down, 4 air cushion tables of 1300x500 mm and one of 2000x500 mm. Cutting height 100 mm

Condition: new, Year of construction: 2024, Solid, self-supporting, firmly welded, torsion-resistant saw frame Sturdy, durable saw-bar steel construction Robust bearing of the motor carriage ensures high cutting precision Powerful, low-vibration 3.9 kW (5.3 hp) motor TRK dust extraction system Automatically deflecting aluminum slatted frame with plastic supports Device for wall mounting ball bearing support rollers divided center support at optimal working height, with aluminum grids integrated small parts support made of wood Supersilent sound insulation for the reduction of saw blade noise Electromagnetic motor brake Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3,9 kW (5,3 PS) saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 exhaust ports ø 100 mm Connected load 4,8 kW Mains connection 3 x 400 V / 50 Hz cutting range: L: 4600 ; Hvertical: 2200 mm , Hhorizontal: 2100 mm Equipment: - Compact 5220 - Scorer VSA stepless - Strip stop - Mech. braked support rollers - Free standing support compl. Psdpfxjihahbj Adnord Location: Ex stock 54634 Bitburg - immediately available - Photo shows optional digital display, which is not in the on offer.

Year of construction: 2018, condition: ready for operation (used), Additional Equipment Main Cutting Disc Motor Power (kW): Max 23 kW Number of Pneumatic Clamps on Pusher: Max. 9 Patented Rotating Support Table Pedpsxwfkysfx Adnord This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information. Application Types Sawing

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 8 kW (10.88 HP), Equipment: motor brake, For sale: SAC panel saw Specifications: - Model: Prestige - Electric height and tilt adjustment with digital readout - CNC-controlled parallel fence - 7.5KW (10HP) main saw Podpfoxx T E Uex Adnerd - 0.5KW scoring saw - 320cm sliding table - Braked motor - CE mark - Original manuals included - Includes multiple riving knives - Year of manufacture: 2010 - Voltage: 400V Trade-in and delivery possible Location: Burdaard, Netherlands

Condition: good (used), max blade diameter 400mm Predpfx Aottxb Ujdnod max cutting height 100mm blade adjustable up/down + angle spindle diameter 30mm main motor 5,5kW undercutter

Condition: used, Storage location: Nattheim Podpfx Aovvkrdednsrd

Condition: as good as new (ex-display), Year of construction: 2023, Striebig Evolution 5224 - Demonstration machine / Exhibition piece Machine if desired with cutting optimization OptiDivide with label printer and label layout EVOLUTION - Precision, ergonomics and functionality perfectly combined Prsdpovkp H Aefx Adned Automatic functions, such as automatic locking and swiveling or automatic and swiveling or the automatic insertion and removal of the saw unit, make your your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Complete free-standing support Complete aluminum small parts support UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 5224 5645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 5224 4300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1991, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 6300 x 1200 x 2900 mm Motor power: 5.5 kW Storage location: Nattheim Pedpfx Ajvvkthednjrd

Condition: new, Year of construction: 2024, EVOLUTION - precision, ergonomics and functionality perfectly combined Automatic functions, such as automatic locking and swiveling or automatic plunge-cutting and ejection of the saw unit, make your daily work much easier. your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Complete free-standing support Paper holder High-end grid made of synthetic materials Small parts support aluminum complete UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Predpjhf Dqbjfx Adnsd Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 6224 5300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm Max. cutting height: 2200 mm Sawblade diameter: 300 mm Max. processing thickness: 80 mm Sawblade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 5300 x 1200 x 2900 mm Motor power: 5.5 kW Podpfx Adjwkai Hjnjrd Storage location: Nattheim

Condition: new, Year of construction: 2025, Holzkraft sliding table saw with scoring device Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminum telescopic stop Angle adjustable With two professional folding fences Ek2a0i2ik Rip fence Standard with fine adjustment and quick clamping Predpfx Aeih Dwvsdnod Scope of delivery: Table extension Table extension Anodized aluminum format sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm trim length 1660 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 79 mm max. clearance width to the left of the saw blade 1270 mm Cutting width with rip fence 900 mm saw blade inclination 90° - 45 saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm Main saw blade speed 4000 min-1 Speed scoring saw blade 7600 min-1 Electrical connection 400 V / 50 Hz motor power 4,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 295 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1999, Max. cutting width: 4300 mm Max. cutting height: 2200 mm Sawblade diameter: 300 mm Max. processing thickness: 80 mm Sawblade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 5300 x 1200 x 2900 mm Motor power: 5.5 kW Prsdpswa Dqgjfx Adned Storage location: Nattheim