Panel saw

Schelling FH430

Condition: used, machine/vehicle number: 008582, Max. panel width: 4300 mm Max. panel length: 5600 mm Pedpfx Aaey Stviogjgr Main saw blade projection: 105 mm No of Grippers: 9 Panel Rotation Station: yes

Condition: used, machine/vehicle number: 008548, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Pgodpfxjzvwtwj Aagsr Panel Rotation Station: yes

Condition: used, machine/vehicle number: 008547, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Podpfozvwtkex Aagjgr Thin sheet loading: yes

Condition: ready for operation (used), Year of construction: 2011, A panel storage system including a saw is available. 1) Surface storage Becker, year of manufacture: 2011, length: 24900mm, width: 14170mm, stack height: 2000mm, lifting height: 2100mm, max. panel dimensions X/Y: 4200mm/2100mm, min. panel dimensions X/Y: 1800mm/600mm, max. lifting weight: 250kg, travel speed horizontal/vertical: 120m/min/40m/min, stack positions: 38, panel capacity at 20mm panel thickness: approx. 3400pieces. Including saw linkage, offcut handling with automatic measurement and separation device. 2) Panel sizing saw Schelling fh 4, year of manufacture: 2011, max. panel dimensions X/Y: 4100mm/2100mm, max. panel thickness: 60mm, thickness tolerance: 0.2mm, max. saw blade diameter: 350mm, cutting length: 4200mm, feed speed: 80m/min. Including storage linkage, lifting and lowering device, central cleaning system, infeed and outfeed systems and further accessories. This is a complete and connected system, including control system, software and optimization connections. Documentation available. An on-site inspection is possible. Expected to be available August 2026. Psdpfxsyrtage Aagsgr

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Max. panel length: 2200 mm Podpfxsiwbfue Aagegr Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Podpstk It Sefx Aagogr Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: excellent (used), Panel Beam Saw - With rear lifting table Pgedpfxsilluke Aager Numerical Control MCS Evolution 2.0 with Software SP2 on Windows XP Lifting table (mm) 2200 x 4300 Twin Pusher Clamps / grippers 7 Max. cutting width (mm) 4250 Max blade projection (mm) 135 Max. clamps opening (mm) 125 Scoring Unit (max saw diameter 200 mm) Main Sawing Unit (max saw diameter 460mm / power (KW 21 / HP 28) Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting Air cushion tables (No.) 3 Total power (Kw) 43 (ca.) OPTIONAL: Optimisation software: HPO

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Podpfx Aajq Rffisgogr Numerical Control MCS Evolution Software Lifting table (mm) 4300 x 2200 No. 2 Rear pushers (one with clamps / grippers) No. 8 clamps / grippers Max. cutting width (mm) 4200 Useful stroke of the pushing system (mm) 4200 Max blade projection (mm) 135 Max clamps opening (mm) 125 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 460 mm - Kw 21 Adjustable speed of the saw carriage (m/min) 6 - 150 Front Turning table (rotating at 90°) with air blowing system (mm 2100 x 4100) Total power (Kw) 36 (ca.)

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° Pgodot Ah Nispfx Aagor No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 7 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) _____ Max. blade projection (mm) 105 Max clamps opening (mm) 105 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 - Kw 18 Pgedpfou A R D Dex Aagor Adjustable speed of the saw carriage (m/min) 0 - 160 No. 3 Front supporting tables with Air blowing system Total power (Kw) 35