Used Paketieren Press for sale (12,406)

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA Pjdotq Ngbjpfx Ahvspp

Condition: used, Year of construction: 2019, Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  Capacity: 1,500 kg/h (apples) Application: Juice extraction from crushed apples Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Pjdpfx Aeyw Aa Iehvjpp

Condition: used, length 2.800 mm width 600 mm height 1.800 mm Number of pressing cylinders 6 Stk. work height max. ca. 1.000 mm Solid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. Pedpfx Aheviwqmsvepp One cylinder without pressure shoe.

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts Pedpfsywztgjx Ahvjpp all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration original mechanical parts Podpfsywztasx Ahvopp all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Including tools

Condition: good (used), Year of construction: 1984, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B Psdoywzh Repfx Ahvepp -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

Condition: used, Year of construction: 2005, Biesse Comil Cosmo NK Corpus press Year of manufacture: 2005 Press dimensions: 2500 x 1300 mm Press cycle: Automatic Press type: Motorized Motor power: 3.7 kW Press pressure: 12,000 N (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Ppodpfx Aeywxzzshvep Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), functionality: fully functional, Year of construction: 1992, Used press brake from Haco (Simat) Type: PRM 30100 Capacity: 3050 x 100 tons Adjustable back gauge and depth Equipped with Multi V die and upper gooseneck blade Podpfx Aeywv Niehvepp

Condition: used, Year of construction: 2010, total length: 3,200 mm, total width: 1,800 mm, total height: 2,000 mm, Weight: 4.500 kg - Year: 2010 - Documentation available: No - CE marking present: Yes Psdjywuzdspfx Ahvspp - CE certificate present: No - Serial number: 7121/13220 - Drive system: Conventional - Power [kW]: 4.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 63 - Max. working width [mm]: 2550 - Max. stroke [mm]: 102 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Additional finger stop - Transport dimensions: 3200mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: not inspected (used), functionality: unexamined, Year of construction: 1995, stroke length: 400 mm, throat depth: 250 mm, pressing force: 200 t, working length: 3,100 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period between 08.04.26 and 16.04.26! TECHNICAL DETAILS Maximum pressing force: 2000 kN / 200 t Maximum working length: 3,100 mm Maximum stroke: 400 mm Throat depth: 250 mm MACHINE DETAILS Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Rated current: 100 A Connection power: 22 kW Total connected load: 35.5 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 3,200 mm Pedpfeyk U Ddex Ahvjpp Machine weight: 19 t Transport width: 2,700 mm EQUIPMENT Workshop drawer cabinets Numerous punches, dies, and additional press brake tooling Operating manual External reference: 17

Condition: used, functionality: fully functional, This listing is for a second-hand ‘Lotus LTS 14’ heat transfer press Item for sale: 1x Lotus LTS 14: Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested and is in working order Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Ppsdpfxeywtz Aj Ahvop Sea-worthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic Podjyfhh Ejpfx Ahvopp - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm - Weight: approx. 1100 kg ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Net price: 35,900 PLN Net price: 8,550 EUR based on an exchange rate of 4.2 EUR (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm Pjdpfeyfhiisx Ahvepp - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING Ppedpfx Ahjh N Dqrevjp WEIGHT 11200 KG SERIAL NO. 6150/11324 MOTOR SIZE 7.5 KW YEAR OF MAUFACTURER 2004

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. Pjdpsrah Evefx Ahvepp 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1235, controller manufacturer: Germany Beckhoff, working width: 1,200 mm, bending angle (max.): 90 °, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, total length: 1,685 mm, total width: 1,262 mm, type of input current: three-phase, workpiece length (max.): 1,200 mm, workpiece height (max.): 430 mm, nominal power (apparent): 3 kVA, number of spindles: 6, opening width: 400 mm, - Germany Beckhoff System, Closed-loop control, High bending accuracy. - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. Podpfjwfwkqsx Ahvjpp - No need to change bending tool. - The Blank-holder tool can automatically change the length basic on the sheet length. - Multilateral automatic continuous bending. -Automatic programming software can finish all the process - Automatically check and optimize. the process -All servo motor control, fast and energy saving - Automatically control pressing force.

Condition: good (used), functionality: fully functional, Year of construction: 1995, control type: CNC control, controller manufacturer: CYBELEC, controller model: CybTouch 15, bending force (max.): 125 t, working width: 3,550 mm, stroke length: 240 mm, throat depth: 300 mm, distance between stands: 3,050 mm, type of crowning: manual, oil tank capacity: 200 l, total length: 4,500 mm, total width: 2,200 mm, total height: 3,000 mm, Equipment/Accessories: Ppedpfxsywr D As Ahvjp - Manual crowning - 3 x manual backgauge fingers - Pneumatic die shifting - Pneumatic upper tool clamping - Foot switch - Cybelec CybTouch 15 (new 2025) - Set of upper and lower tools

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Technical Specifications Protection Laser Podpfx Asv Tz Ukohvepp CNC Bending Table CNC Axes: Y1/Y2/X/R Manual Axis: Z1/Z2 Split Toolless CYBELEC CYBTOUCH 12 Graphic CN ALMOST NEW CONDITION Features Motorized Backgauge Stroke: 800 mm Working Height: 900 mm Main Motor Power: 11 kW Weight: 7900 kg Oil Capacity: 200 liters Folding Length: 3100 mm Power: 135 T Gooseneck: 400 mm Distance Between Columns: 2600 mm Sliding Stroke: 275 mm Approach/Working/Return Speeds: 200/10/120 mm/s Backstop Speed: 230 mm/sec Table slider clearance: 550 mm Table width: 90 mm Machine dimensions L x W x H: 4250 x 2050 x 2700 mm

Condition: excellent (used), functionality: fully functional, Torsion-resistant gantry construction for precision and service life – Foot release – Stack height 60 mm – Insertion depth approx. 100 mm behind the drills Pedpfx Ajyx Axaehvspp – Insertion width 480 mm – Drill length compensation – Hole diameter 2 – 20 mm – 1 to 4 drilling heads – Automatic table lift

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 370 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Podpfsyx Am Djx Ahvepp Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: excellent (used), Year of construction: 1991, AMADA MODEL HFBE 170-3 170 tons x 3000 complete with DELEM DA 58 MULTI AXIS CNC CONTROL ERWIN SICK MACHINE MOUNTER ELECTRONIC GUARDING SUYSTEM SIDE AND REAR INTERLOCKED FENCING Bending force: 170 T Bending length: 3100 mm Psdpfx Ahjwcd Spsvopp Distance between uprights: 2650 mm Cnc control: DELEM DA 58 Throat: 410 mm Vertical stroke: 180 mm Working speed: 10 mm/s Axis number: 6 Including Z axis Motor Power: 13 kW Machine weight: 10500 kg Machine dimensions (LxWxH): 3200 x 1700 x 2500 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, overall weight: 2,450 kg, Used HSM V-Press 1160 Plus vertical press from 2016. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Pjdpfjyx Abnjx Ahvspp Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 2010, operating hours: 4,150 h, functionality: fully functional, machine/vehicle number: T8/049, overall weight: 4,300 kg, For sale: Briquetting press for the production of briquettes from sawdust Wropol Bison III Speedy 500 Psdsx H T Eaopfx Ahvopp Serial number: T8/049 Year of manufacture: 2010 Technical specifications: • Motor: 30 kW • Throughput: approx. 500 kg/h (depending on raw material) • Operating hours: 4,150 mth Technical condition: • Machine is fully operational and in continuous use • Prepared for continuous operation • Hydraulic oil changed – July 2025 • No play, press runs smoothly Briquette dimensions (RUF-type block): • Height: 100 mm • Width: 65 mm • Length: approx. 120 mm (adjustable) Possibility to start and test the machine on site.

Condition: used, Year of construction: 1972, machine/vehicle number: 703, total height: 3,200 mm, table height: 1,160 mm, total width: 1,600 mm, total length: 2,000 mm, pressing force: 200 t, table width: 1,200 mm, table length: 730 mm, overall weight: 11,280 kg, distance table to ram: 870 mm, type of input current: three-phase, working height: 1,160 mm, clearance between the columns: 1,280 mm, stroke length: 620 mm, working range: 1,280 mm, drop-through hole in table: 30 mm, oil tank capacity: 300 l, input voltage: 380 V, control cabinet height: 670 mm, control cabinet length: 300 mm, Equipment: documentation/manual, Hydraulic Press GIGANT (Costruzioni Oleodinamiche) 200-ton, operational and available for sale. Machine equipped with drilled/slotted worktable for clamping and setups, complete electrical cabinet, and hydraulic system. Documentation available (manual/schematics). Main specifications: - Pressing force: 200 t - Overall dimensions (W×D×H): 1600 × 2000 × 3200 mm Ppsdpfxeyl Nrrj Ahvop - Weight: 11,280 kg - Table height from floor: 1160 mm - Max opening (daylight): 870 mm - Min opening (daylight): 250 mm - Ram stroke: 620 mm (870–250) - Usable clearance between columns (X): 1280 mm - Usable clearance front/rear (Y): 600 mm - Usable working area: 1280 × 600 mm Table / clamping: - Through holes: Ø 30 mm - T-slots: 2 × (730 × 20 mm) + 2 × (1200 × 20 mm) Electrical / hydraulic system (nameplate data): - Power supply: 380 V – 50 Hz (three-phase) - Motors: 15 + 15 HP - Oil tank: 300 L (schematics/manual) GTP 200/2-E configuration with dedicated circuit and available electrical/hydraulic diagrams. Electrical cabinet (external dimensions): - 670 × 500 × 300 mm (H×W×D) Condition: used Documentation: yes (manual/schematics). Transport: at buyer’s expense, loading by seller.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Podpfx Ahsyxz Sxovspp Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.