Used Paketieren Press for sale (12,401)

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t Ppodpfxj Dqaqe Ahvjp space needed: 2100 x 3800 x 3100 mm

Year of construction: 1993, condition: used, machine/vehicle number: P 285, pression: 800 kN Ppjdpfxe N D Ane Ahvsp table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm weight: 6000 kg

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Ppsdebnnyispfx Ahvjp Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg in mobile version

Year of construction: 1978, condition: used, machine/vehicle number: 455 178, pression: 45 t throat: 230 mm Ppedpodd Irgjfx Ahvep table size: 460 x 690 mm clearance hole in the die: 175 x 220 mm table adjustment: 160 mm tappet area: 185 x 360 mm tappet adjustment: 55 mm stroke adjustment: 4 - 80 mm number of strokes: 120 /min engine: 380 V, 3 kW space needed: 1800 x 1100 x 2100 mm weight: 2800 kg

Condition: used, machine/vehicle number: 478, pression: 36 t Ppodpfxjbb Tguj Ahvop max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg Psdpfx Asvgcpcohvjpp

Year of construction: 1976, condition: good (used), machine/vehicle number: H 76-467, Pressing force: 160 kN Ram stroke: 100 mm Installation height: 350 mm Hole in the table: 100 mm Ram bore: 32 mm Stand passage: 650 mm Ppedjflrhzepfx Ahvep Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx .: 1,2 t

Condition: ready for operation (used), Year of construction: 1970, machine/vehicle number: 5058870, Pressure force: 25 tons Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Number of strokes: 150 / min Drive Motor: 380V 1.1KW Required space: 1600 x 850 x 2000 mm Weight: approx. 1450 kg Pedem Uxzuepfx Ahvspp

Condition: ready for operation (used), Year of construction: 1991, Press force: 60 t Max. working width: 2550 mm Pedpfx Ahsyda Uzevepp Clear distance between uprights: 2550 mm For sheets (at full working width) up to: Throat depth: 250 mm Bending speed: 75 mm/s Return speed: 95 mm/s Backgauge adjustment: 500 mm Hydraulic drive: 380 V, 4 kW Space required: 2920 x 1350 x 2250 mm Weight: 4.7 t Control: CYBELEC

Year of construction: 1999, condition: used, Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Podpfjwnhicsx Ahvepp Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1032, warranty duration: 12 months, total width: 2,300 mm, total length: 1,685 mm, bending angle (max.): 90 °, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, nominal power (apparent): 4 kVA, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, type of input current: three-phase, -Complete machine frame processing -Double-cylinder electro-hydraulic synchronous control -A variety of electro-hydraulic CNC systems are optional Ppedewfwkwopfx Ahvsp -Mechanical compensation -Segmented mold -High-precision back gauge structure -Scalable number of axes

Condition: good (used), Year of construction: 1990, hydraulic edging or gluing press 5 vertical cylinders 3 hold-down units External dimension: 3700 mm Pedoyxyh Ejpfx Ahvepp External height: 2480 mm Available from site: 57319 Bad Berleburg

Condition: good (used), functionality: fully functional, total height: 2,700 mm, pressing force: 25 t, table width: 500 mm, table length: 500 mm, overall weight: 2,000 kg, distance table to ram: 800 mm, stroke length: 500 mm, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ram stroke: 500 mm Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Podsxfzdlopfx Ahvepp Documentation included

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Podpfxoywdtvs Ahvepp Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: good (used), Nagel Citoborma 290AB Paper Drill The machine is 100% functional and ready to use. Robust construction – weighs 200 kg. This is the current Citoborma drill model in production. Podpfxjywdqzo Ahvopp 400V power supply. Two drilling heads with adjustable spacing ranging from 45-170 mm. Drill diameter: 2-20 mm. Stack height: 60 mm. Controlled by an electric foot pedal. Waste is directed to an external sleeve. The drill table is adjustable in every direction (sides, front/back) and has stops for setting the drill spacing (non-standard drilling). Additionally, a special module for standard spacings is installed in the table. Furthermore, the table has two movable margins. The drill has an automatically released table lock after each cycle, allowing the table to be moved to the next position. The set includes drills, tools and instructions.

Condition: good (used), Nagel Citoborma 490 Paper Drill This is the largest Citoborma drill currently in production. Very good condition, ready for production. The machine has 4 drilling heads. Drilling waste is discharged into a basket located at the rear of the machine. The machine is operated using a foot pedal or two-handed buttons. Each head has a separate up/down adjustment, allowing for the use of drill bits of different lengths. The set includes spare drill bits, tools, and an instruction manual. Technical specifications: Number of drilling heads: 4 (each head can be quickly removed) Podpeywdn Tefx Ahvspp Maximum stack height: 60 mm Drill bit size: 2-10 mm Adjustable spacing: 45 – 425 mm Two drilling speeds 380V power supply Weight: 365 kg Made in Germany.

Condition: good (used), Sperr & Lechner SL II A-100 Hydraulic Bookbinding Press Ready for operation. The machine is like new. The press has a built-in hydraulic unit. Piston rod area (main plate): 580x440mm Single piston rod area: 440x280mm. Irreplaceable in bookbinding for the production of books, pads, etc. Weight: 600kg. 380V power supply. Made in Germany. Pjdpeywdmvefx Ahvopp

Condition: good (used), Nagel Citoborma 480AB Paper Drill This machine is in very good condition. It has four drilling heads. Technical specifications: Pjdpfxjywdmpe Ahvjpp Drill bit distance: 45-285 mm Drill diameter: 2-20 mm Stack height: 60 mm Weight: 275 kg Automatic drilling cycle, controlled by a foot pedal and manual buttons. Sturdy construction on a pedestal. The drill table is adjustable in all planes. This is one of the newest Citoborma models. Includes operating tools, instructions, and a new cutting stick and drill bits.

Condition: used, functionality: fully functional, Year of construction: 2010, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: DNC 880S, bending force (max.): 160 t, working width: 3,100 mm, Neat Deratech press brake with a capacity of 160 tons and a bending length of 3 meters. Equipped with a Cybelec CNC control, CNC X-axis, R-axis, and two backgauge fingers that can be manually adjusted sideways. Hydraulic crowning. The seals of the hydraulic crowning system have been recently renewed. Psdpeyxxn Dofx Ahvjpp

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 145 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Ppjdpfx Aofbbqhohvop

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Podpfxex Sr Eve Ahvspp Prior sale is reserved.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale! Ppjdpsxwp Nyefx Ahvop

Condition: excellent (used), functionality: fully functional, shelf length 3500 mm shelf width 1300 mm 8 hydraulic cylinders cylinder diameter 85 mm integrated oil heating Ppodpfxoyxwzco Ahvsp power supply 380V

Condition: like new (used), functionality: fully functional, Year of construction: 2019, control type: CNC control, actuation type: electric, controller manufacturer: Lenze, bending force (max.): 100 t, working width: 3,060 mm, throat depth: 1,000 mm, distance between stands: 3,200 mm, operating speed: 75 mm/s, number of axes: 6, table height: 1,000 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 7,900 kg, total length: 4,500 mm, total width: 1,820 mm, total height: 2,650 mm, number of support arms: 2, warranty duration: 6 months, pressing force: 100 t, Equipment: CE marking, documentation/manual, foot remote control, safety light barrier, SAFANDARLEY E-Brake press brakes feature an electric drive system. Lenze servomotors, controlled by inverters from the same manufacturer, ensure fast and reliable operation of the system for many working hours. Additionally, the machine only consumes electrical energy during the downward movement of the ram. The return of the ram is powered by spring force. The machine consumes virtually no electrical energy in standby mode, as there is no pump in the system as found in hydraulic presses. We estimate energy consumption to be 70% lower compared to conventional hydraulic press brakes. Servo-electric press brake SAFANDARLEY model E-Brake: Pjdpfxjr Ndxqj Ahvspp Pressing force: 1000 kN (100 tons) Ram stroke: 300 mm Opening (Q): 590 mm Upper beam descent speed: 75 mm/s Upper beam precision: +/- 0.01 mm Maximum backgauge finger speed: 350 mm/s Maximum backgauge reach (third reference point, X-axis travel): 1000 mm Backgauge R-axis range: 150 mm Connected load: 11 kW Weight: 6,350 kg Machine width: 4,080 mm Machine depth: 1,775 mm Machine height: 2,510 mm Power supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Belt-driven transmission CNC-controlled axes: Y1-Y2-X-R-Z1-Z2 WILA hydraulic upper clamping system The machine can be inspected and tested in Sosnowiec.

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Pedpfx Ajywadwjhvepp Max height workable: 1320 mm Max feed speed: 40 m/min