Used Packing Wafer for sale (2,767)

Condition: used, Rotary vane vacuum pump – packaging Manufacturer: Busch Type: CB0251B Vacuum: 0.5 mbar Bjdpfxedi Eklj Adrswp Condition: used, tested! Maintenance for the unit is offered separately! Includes: oil filling Delivery time: in stock!

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Bedpfx Adeuyhf Herjwp Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: excellent (used), Ilapak Vegatronic 2000. Has also got a forming tube for a quad seal snack pack. Was also packing 700-5kg bags. Bsdpfeuqbk Aox Adrswp

Year of construction: 2003, condition: used, Standard accessories. Bwodpfx Adjci Tnwjrsp

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Bsdpfxjywgaxe Adrjwp Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: excellent (used), Filling device for packaging chips mobile suspension crane maximum extension height: 3.30 meters Bwedpfx Ajylknbsdrjp load capacity approx. 10 kg 4 lockable swivel castors

Condition: good (used), Robopac Ariane 6050/2TA Lsealer shrink tunnel Serial: KN055476 Bwjdpfxott D S Hj Adrop L sealer sealing bars 600mm x 500mm, into shrink tunnel aperture 450mm x 200mm, adjustable controls, mobile, 3Ph

Condition: good (used), functionality: fully functional, 100100584V00 (old 100028262/V00) Screen AC Servo Pack SGDH-08AE-SY202, Ver. OF214-0 Bwjdoyitfkepfx Adrjp second-hand, tested and 100100029V00 Screen AC Servo Pack SGDH-15AE-SY202-E (IP1X), Vers. 70942-2 second-hand, tested All offers subject to prior sale

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 1439, Redpak NTS-BMS packaging machine (2023) together with BVM SC 4530 SD shrink tunnel (2017). Condition: very good. Bedpfx Aoyuu Nbedrewp

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output Bjdpet U Uiajfx Adrewp ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Condition: used, STC Film Wrapping machine, Bsdpfec Nlxrox Adrewp Machine used for packing champignon. Capacity 40-80 pack/min.

Condition: new, Year of construction: 2020, SEE photos + PDF layout ATTACHED Bjdpfx Asypb U Tjdrjwp 1 NEW CSP Aut. complete parquet shrink foil packing line (year 2020) never in use. TOTAL LINE consisting of: roller track + industrial parquet scanner + strapping machine + shrink foil packing line AVM 700 + roller conveyor + heating unit + aut. labelling + collect accumulator with double lenght cross conveyor. (see pdf layout)

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Bsdpfxoyma Ade Adrswp Thickness range: 0.8 - 5.0 mm Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. Bwsdoymahyopfx Adrop - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: refurbished (used), Year of construction: 2004, Very good BVM Compacta trend 5015. Originally delivered and fully refurbished by Nodema. Bedpfx Adjx Itwljrswp

Condition: used, Year of construction: 2006, functionality: fully functional, BVM Brunner 8030 Bwjdpfxot Euuwo Adrsp

Condition: good (used), Soco System Packing Station System 14,800 mm double-deck roller conveyor with 800 mm steel rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9,850 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive and two through-feed flaps 90° curve with conical rollers and two drives for heavy loads 6,000 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive 9,750 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, without drive 6 x Rocholz System Flex packing and work tables Carton magazine Workstation lighting Keyboard and mouse tray with articulated arm Bwjdpfx Asxl Rn Tedrjp Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Storage shelf Width: 2,000 mm Depth: 800 mm 6 x 1,000 mm Transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers Switch and control cabinet Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping available upon request!

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: Bjdpjxxyigjfx Adrjwp - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits: - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Year of construction: 2025, condition: new, I have a packaging machine for sale for bulk goods such as flour, sugar, powdered milk, spices, and much more. The packaging capacity is 5-30kg in paper or plastic bags. the price 13 500 EUR including 1- screw feeder 2- packing machine 5-30kg - Power supply: 2.5kW 400V 50Hz - Packaging accuracy: +/- 1% - Packaging speed: 200-400 bags per hour (at 10kg) Bodpoxfaptjfx Adrjwp - Set weight: 190kg - Set dimensions: 1000x850x2300mm For highly dusty products, an additional dust extractor can be connected. Price 13 500 EUR - EXW terms INVITE TO INQUIRE

Year of construction: 2025, condition: new, Equipment: CE marking, The granules filling packaging machine can filling the granules materials, such as beans, rice, sugar,almonds and other granular materials Filling capacity: 5-5000g Bwjdexyiz Ijpfx Adrop Filling speed: 400-600 bags/hour(Base on 1kg) Material: Food grade 304SS Power: 1.5KW Voltage: 220V 50HZ Single phase

Year of construction: 2025, condition: new, The press is suitable for high juice yields of various fruits such as apples, pears, blackberries, strawberries, blueberries, currants, carrots, herbs, quinces, onions, etc. The types of fruit listed above have been tested by our customers with our packing presses. The system is equipped with an automatic pressing programme so that the system switches off the pressing pressure itself at the end of the pressing process. You can order the machines with one or two turning juice basins. Accessories: • 18 pieces of press cloths • 20 pieces of press grate Technical Information • Output: 600 kg/h • Pressing force: 18 T • Power consumption: 2.2 kW, 230 V, 10 A • Material: Wnr. 1.4301, AISI 304 stainless steel Dimensions: Bjdpfx Adjtz Sp Dorowp • 1,250×1,370×1,520 mm • Weight: 450 kg • IP65 electronic switch boxes • High yield up to 60–80%

Year of construction: 2025, condition: new, The press is suitable for high juice yields of various fruits such as apples, pears, blackberries, strawberries, blueberries, currants, carrots, herbs, quinces, onions, etc. The types of fruit listed above have been tested by our customers with our packing presses. The system is equipped with an automatic pressing programme so that the system switches off the pressing pressure itself at the end of the pressing process. You can order the machines with one or two turning juice basins. Accessories: • 18 pieces of press cloths • 20 pieces of press grate Technical Information • Output: 1000 kg/h • Pressing force: 18 T • Power consumption: 2.2 kW, 230 V, 10 A • Material: Wnr. 1.4301, AISI 304 stainless steel Dimensions: • 1,000×1,680×2,720 mm • Weight: 720 kg • IP65 electronic switch boxes Bjdpfotz Spkjx Adrowp • High yield up to 60–80%

Condition: used, Power converter, power supply, power pack, switching power pack -Manufacturer: Siemens, SITOP Power 40 power supply -Type: 6EP1437-3BA00 -Input: 3AC 400-500V/max.2.6A 50/60Hz -Output: 24VDC/40A/960W -Dimensions: 130/240/H120 mm Bsdpfx Ajmch Umjdrewp -Weight: 3.4 kg

Condition: good (used), Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: PK 50 monovolt -Number: 1x control cards available -Price: per piece -Dimensions: 40/210/H130 mm -Weight: 0.8 kg Bwodpfx Ajccbnpodrop

Condition: used, Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, Bedpfenah A Asx Adrjwp -Manufacturer: MGV, power pack power supply -Type: PH1003-2840 -Input: 3 x 320...460V AC -Output: 27.3 VDC /40 A -Number: 2x power supply available -Price per piece -Dimension: 265/160/H125 mm -Weight: 2.5 kg/pc.