Used Wrap for sale (808)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Bodpfx Alou Tg I Dobjwn Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Bwodju Tg Nnepfx Albjn Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), The FW755 wrap-around case packer is an electronic wrapping machine designed for packaging a wide variety of products, including bags, boxes, cups, flow-wraps, and rigid containers, into a two-piece display box (tray and lid). Using appropriate loading systems, products can be placed in the box flat, on their side, or standing upright in one or more layers. Bjdpfjzbid Hex Albewn The machine has four stations: tray pick-up and deposit station, product loading station, tray sealing station, and a station for placing lids from above.

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Bwedpfx Aljxn Aamjbon

Condition: used, BENHIL 8380 Butter Filling and Wrapping machine for 250gr Current Format | IN STOCK Benhil 8380 Butter Filling and Wrapping Machine Machine Benhil 8380 Capacity up to 80 packets/min (4.800 p/h) Pack size 250 gram Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘’as is’’ Good Condition (Complete) Bwodozbg Euepfx Albsn Price fully refurbished: Ask for Quote

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 800 mm, conveyor belt width: 800 mm, type of input current: three-phase, total width: 1,000 mm, total length: 900 mm, total height: 1,400 mm, TOP Wrapping Machine – Spiral-Shaped Pastry Wrapping Machine Bedpfx Alewc H R Uebewn Universum Kasper Model: HWM 60/80 For all types of dough, such as pretzel dough, breadsticks, and lye pastries, etc. TOP Universal – Combination – Wrapping Machine For all types of dough suitable for wrapping and long-rolling Simple spiral-shaped pastry wrapping machine with a long-rolling attachment Machine is mobile Stainless steel construction Connection: 400V, 16A CEE plug Used machine, refurbished With warranty and spare parts service Optional: Delivery service Feeding device Weight range: 350 to 1000 grams Service package Maintenance contract Training and commissioning Leasing and rental service We have a TOP selection of wrapping machines in stock!

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, working width: 550 mm, conveyor belt width: 650 mm, type of input current: three-phase, total width: 840 mm, total length: 1,300 mm, total height: 1,250 mm, input frequency: 50 Hz, TOP Croissant Rolling Machine Gio 4 CF with long roller with infeed conveyor Weight range approx.: 50-2000g depending on the product Bwedpfx Ajw Tub Ijlbon for the production of sticks, loaves, and croissants Rolling width max.: 550 mm Long roller adjustable up to 650 mm width Stainless steel design, mobile Dimensions approx.: 840 x 1300 x 1250 mm, WxDxH Used machine with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Delivery Maintenance contract Service package Training & commissioning We have more long rollers in stock!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 600 mm, total length: 700 mm, total height: 1,400 mm, Twisted bread wrapping machine, Universum HWM 30 TOP wrapping machine Universum Kasper, Model: HWM 30 Twisted bread wrapping machine, mobile Bsdpfx Aew U Ittjlbown for all types of breadsticks, such as pretzel sticks and lye breadsticks, etc. Universal wrapping machine for all types of dough suitable for wrapping Stainless steel design 300 mm belt width for best results robust technology Connection: 400V, 16A CEE plug Dimensions approx.: 600 x 700 x 1400 mm, WxDxH Used machine, overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Options: Conveyor belt EB Delivery service Service package E-box for increased safety Maintenance contract Training and commissioning Visit our large bakery machine exhibition!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2026, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 320 mm, type of input current: three-phase, total width: 630 mm, total length: 710 mm, total height: 1,220 mm, Erka WML 30 Croissant Wrapping Machine Wrapping band width 320 mm for all types of dough, such as croissant dough, pretzels, and lye sticks, etc. Universal combination wrapping machine for all types of dough for wrapping and long rolling Long rolling table, foldable simple, robust technology mobile croissant wrapping machine Connection: 400V, 16A-CEE plug Dimensions: 630 x 710/1110 x 1220/1300 mm (W x L x H) Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Bwodjw Tqklspfx Alben Benefit from over 35 years of experience! Optional: Maintenance contract Feeder Spare parts box for added security Service package Delivery service Instruction and commissioning We have a large selection of croissant wrapping machines!

Year of construction: 2016, condition: excellent (used), Böhl - wrapping machine type JUNIOR/S-450 VA Product dimensions: Length: 600/800mm maximum 5800mm Width: 15mm maximum 220mm Height : 15 mm maximum 120 mm Maximum weight 30 kg/metre The maximum cross-section diagonal of the previous customer was 220 mm. The specified weights are only possible with a driven on-site roller conveyor. Technical specifications: Electrical control: Siemens S7 with TP Control voltage: 24V DC Operating voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed air: 6 bar dried, cleaned and oil-free Air consumption: about 20 NL cycle Maximum feed pressure: 8 bar Noise emission value: less than 80 db/A Machine compare layout Operating side: on the right in the conveying direction Control cabinet: on the left fixed to the machine Varnish machine 7032, gray black-yellow Bedpfxjlcc U Ej Albown Runway height: 900mm

Condition: used, Year of construction: 2020, functionality: fully functional, Set consisting of an automatic vacuum packaging machine, Komet FastVac (Type 3350014, year of manufacture 2020), and a large quantity of packaging film. The machine comes from professional use and is designed for continuous operation in food processing. MAP gassing (modified atmosphere packaging) is optional. Scope of delivery: • 1 × Vacuum packaging machine Komet FastVac, Type 3350014 • Vacuum film PA/PE 20/70, 322 mm – total quantity 6,569 m² Condition: • Used, well-maintained • Regularly serviced • Operating log available Location: Selters. Shipping or collection from the location is possible. Technical data: Manufacturer: Komet Maschinenfabrik GmbH Model: FastVac Bwsdpfxsza Aigj Albsn Type: 3350014 Year of manufacture: 2020 Packaging type: Vacuum, optional MAP (gassing) Throughput: approx. 3 – 5 packages/min (product-dependent) Vacuum pump: approx. 60 m³/h Film width: approx. 322 mm Connection: Electricity + compressed air + if applicable, gas CE-compliant: yes Incl. film: Vacuum film PA/PE 20/70, 322 mm – total quantity 6,569 m² Location: Selters

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN Bedpfeu Nu Hiex Albswn movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 600 mm, conveyor belt width: 600 mm, type of input current: three-phase, total width: 790 mm, total length: 820 mm, total height: 1,300 mm, TOP Twisting Machine Universum Kasper, Model: HWM 40/60 For all types of dough pieces such as pretzels, breadsticks, and lye sticks, etc. Universal combination twisting machine For all types of dough suitable for twisting and forming long rolls Twisting machine with lower long-roll former Machine is mobile Connection: 400V, 16A-CEE plug Dimensions: 790 x 820 x 1300 mm, WxDxH Used machine, refurbished With warranty + service Options: Bedpfx Aevvqhrolbswn Delivery service Weight range of 300 to 800 grams With conveyor Service package Maintenance contract Spare parts box Instruction and commissioning Leasing & rental service Many other TOP bakery machines in stock!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: W0109111, working width: 1,400 mm, stack height: 1,800 mm, product height (max.): 80 mm, Automatic wrapping machine, Ream wrapper mid-speed wrapping of all metric and standard U.S. ream sizes including half-ream packages. Bjdpfx Alsy Ufh Njbown Machine capable of wrapping paper reams ranging in dimensions from 297 x 420 mm (A3) up to 1000 x 1400 mm. The machine ensures maximum flexibility thanks to its quick changeover features. The reams are manually feed by the operator, who controls all the machine's operations. The reams are wrapped in polyethylene or kraft paper, pre-cut into the sheets required for wrapping. Afterwards, the reams are stacked and placed in the collection station. The set of rolls can be installed on either the right or left side of the machine upon request.

Condition: ready for operation (used), total length: 5,000 mm, film width: 550 mm, product height (max.): 150 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink Film Packaging Line Manufacturer: Hugo Beck Model: Flexo 500 S Horizontal film packaging machine with side sealing for tubular film, comprising film wrapping machine and downstream shrink tunnel. The intermittent motion tubular bag machine Flexo 500 impresses with its outstanding versatility and flexibility. Whether for frozen pizzas, biscuit boxes, fruit and vegetables, books, skis, laminate flooring, or various household products, this machine equips you to handle any application quickly and efficiently, ideal for daily changing production orders. - Film Wrapper Hugo Beck Flexo 500 S, Year of manufacture: 2003 Workpiece dimensions: Width: approx. 55 - 400 mm Height: approx. 2 - 150 mm Length: from min. approx. 80 mm, theoretically unlimited Consumables/Film: Center-folded (half-tube) film, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate: approx. 20 m/min Rated voltage: 400/230 V, 50 Hz, 3 phase Rated current: 5 A Connected load: 3 kW Machine dimensions: approx. 2500 x 1500 mm (LxW) Weight: approx. 650 kg - Shrink Tunnel Hugo Beck Type HV 601, Year of manufacture: 2002 Working width: approx. 600 mm Pass-through height: approx. 300 mm Bwjdpfx Alsyw H Rkobon Feed rate continuously adjustable Chain rod transport, silicone-coated transport rods Temperature control via electronic thermostat, separately adjustable top and bottom heat Heating capacity: approx. 4 - 12 kW Rated voltage: 230/400 V, 50 Hz, 3 phase Rated current: 19 A Connected load: approx. 12 kW Machine dimensions: approx. 2500 x 1100 mm (LxW) Weight: approx. 400 kg

Condition: excellent (used), Year of construction: 2010, Year 2010 Format max 520 x 720mm Format min 200 x 250mm Bwsdpfsqfga Sjx Alben grammage 130g/m2 to 350g/m2 speed 20m/min pneumatic pressure touch screen display

Condition: good (used), Banding machine Willy Heckmann WHU 200E The machine is like new, ready to work. Manufacturer: Willy Heckmann GmbH & Co. Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Bsdpfx Alsy S Edlebown Goal size 850x600mm Strap width 12mm Power supply 230V Weight 200 kg Ask About The P

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data Manufacturer: Kisters Maschinenbau GmbH Model: Wrap Around Packer 420/50 Machine Type: Wrap-around packer / secondary packaging machine Year of Manufacture: 2001 Capacity: up to approx. 50,000 bottles/hour Operating Hours: 16,976 h Application: Packaging of PET one-way bottles Previous Use: PET one-way beverage line Current Status: Taken out of operation due to line reconfiguration Bottle Formats: 0.33 l, 0.355 l, 0.5 l Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 inkl. shrink application for trays  Listed Formats: 0.33 l LNB 2x12 tray 0.355 l LN 2x12 tray 0.33 l LNB 4x6 tray 0.355 l KN 4x6 tray 0.33 l LNB 3x8 tray 0.355 l LN 3x8 tray 0.5 l LN 4x6 tray 0.5 l LN 6x4 tray 0.5 l LN 4x6 KLW full carton 0.33 l LN 4x6 loose wrap-around 0.33 l LNB 4x6 90° tray 0.355 l LN 4x6 90° tray 0.33 l BA 4x6 loose wrap-around 0.33 l BA 3x4 loose wrap-around 0.33 l Miller 4x6 loose wrap-around 0.33 l Salitos 4x6 loose wrap-around 0.33 l Vichy 4x6 tray cluster 0.33 l LN 4x6 tray cluster 0.33 l LN LCE 4x6 full carton 0.33 l EW 4x6 export full carton 0.33 l EW 4x6 export tray 0.5 l EW 4x5 loose wrap-around Bedpfoy Sidvex Albjwn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Bwodjxdn Nropfx Albon Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0488, KEBER Palletizer & Wrapping machine [Year : 1997 sn : 0488 Model :101 ] ~ 1700 packets / h Wrapper [Year : 1997 sn : 0487 Model :MEC ARM] Bsdpfx Alstgmwrjbswn Machines are operation. ALSO FOR SALE : Palletiser - ACMI - RASAR P135 H - €49,000 2000 Year ACMI s.r.l Palletiser with wrapper used for 5000ml PET bottles & EUR pallets C-1581 Serial No

Condition: used, Year of construction: 2013, Used Wrap Around SGE year 2013 – 3000 boxes/hour General Technical Description Bwjdpjwbgzdjfx Albon The Used Wrap Around SGE year 2013 – 3000 boxes/hour delivers high-efficiency carton packaging for PET and glass containers. S.G.E. manufactured this machine in 2013, and since then, it has served as a reliable solution for secondary packaging in bottling lines. Not only does the structure support demanding industrial use, but it also ensures consistent and repeatable operation. Furthermore, the machine integrates seamlessly into most bottling layouts. Importantly, the Used Wrap Around SGE year 2013 – 3000 boxes/hour reaches this output capacity thanks to the integration of a divider insertion system, which places cardboard dividers (commonly known as alveare) between bottles. This feature stabilizes the packs during carton folding and gluing operations, and ensures safe handling, especially in multi-row configurations. The machine is configured to work with bottles of 0.75 L and supports multiple carton formats, including 3×2, 3×4, and 3×6. This format versatility enhances its adaptability across a wide range of packaging needs. Configuration and Performance of this Used Wrap Around SGE The Used Wrap Around SGE year 2013 processes up to 3000 cartons per hour, both in the 3×2 and 3×4 formats. Consequently, the 3×2 configuration yields 18,000 bottles per hour, while the 3×4 configuration handles 36,000 bottles per hour. The 3×6 configuration further extends the machine’s capacity, allowing even higher bottle output depending on the production layout. The machine uses a straight-line infeed system that guides bottles into the carton blank positioning area. Once the bottles are in place, the system folds a flat carton blank around them and seals it using hot-melt glue. The entire process—forming, folding, and gluing—is mechanically synchronized to ensure high packaging precision. Moreover, the modular design allows for fast format changes and simplified maintenance. Above all, the machine maintains stable output even during peak production. Electrical and Mechanical Specifications The machine operates on 400 Volts, 50 Hertz, and draws a maximum of 42 kW. This power supports key functions such as motorized feeding, carton forming, and gluing. Additionally, S.G.E. designed the wrap around with rugged components, which resist wear and ensure long-term reliability. In fact, engineers can easily access all mechanical areas, simplifying maintenance and diagnostics. For this reason, the machine suits production environments that require both uptime and durability. Safety and Operational Condition S.G.E. equipped this Used Wrap Around with a complete set of safety devices. Therefore, the machine complies fully with European safety regulations for operator protection. At present, it remains in storage; however, all its main systems are preserved under controlled environmental conditions.

Condition: used, Year of construction: 2006, operating hours: 6,800 h, Used Dimac Planet 45 WrapAround Packer 2006 This wrap around packer was produced by Dimac in 2006, and it is the model Planet 45. The machine is still in production with 6728 working hours. This used wraparound Dimac produces 45 packs per hour and processes various formats including bottles and cans. It has various spare parts available upon request. It is complete with user manuals and safety features in accordance with the law. The used Dimac Planet 48 Wrap Around Packer 2006 is in excellent condition and ready for sale. Technical specification: The Used Dimac Planet 45 WrapAround Packer has straight inlet with a bottle sorter at the inlet. We have 22 formats available inserted into the machine. The operator side is on the right side of the you want it can also be changed without any particular problems. If you need ribbons we can also sell those separately; You just need to have a layout to check their feasibility, we have many ribbons available. Dimac used wraparound overhaul services: We also provide assistance and maintenance services for used wraparound Dimac and Robopack machinery in general automation of the Athena group company. We carry out disassembly and assembly with our technical team anywhere in the world. In the case of overhauls, the delivery time is only affected by the delivery of the electrical parts. We also carry out audits in your company, it is necessary to first carry out an inspection to verify its feasibility. In the case of this machine which has a few working hours, delivery is immediate as it is in excellent condition. Bwodpfx Aovgvy Iolbjn Contact us for a quote or an inspection, we can move, disassemble, reassemble entire bottling plants. We carry out an inspection by our staff or through your layout and video/photos of your system.    

Condition: used, Year of construction: 2014, Used Automatic Wrap Around Packer Vanta 2100 bph Introductionof the Wrap Around Packer Vanta Initially, the used Vanta 2100 bph automatic wrap around packer marks a significant innovation in the bottling sector. Specifically designed to accommodate various container types like cans, glass bottles, and PET bottles, this machine exemplifies efficiency and precision in packaging. Product Types and Scope of Application Bjdpfsvgt Trsx Albewn Notably versatile, the Vanta 2100 bph adeptly adapts to different product sizes and types. It can manage cans, glass, and PET bottles, with diameters ranging from 50 to 110mm and heights from 70 to 370mm. Moreover, its capacity extends to the packaging size, crosswise to the conveyor direction from 140 to 450mm, and forward from 200 to 450mm. Additionally, the range for corrugated board sizes is expansive, horizontally to the conveying direction from 210 to 1500mm, and frontally from 280 to 700mm. Technical Specifications Functionally, the machine operates with a three-phase voltage of 380V and a frequency of 50 Hz. Its power consumption is a modest 13 KW, while control is efficiently maintained at 24VDC. Regarding air usage, it’s a critical aspect, with a consumption of 110L/min at 0.6MPa and 6.7 m3/h. Weighing 7000 Kg, it conforms to noise regulations, maintaining a level within 85 dB. Positioning and Feeding For carton feeding, the setup is straightforward, ensuring a consistent and smooth material flow. This feature is crucial for maintaining efficiency and reducing downtime, assuring that each packaging phase is seamless and uninterrupted. Conclusionof the Wrap Around Packer Vanta In summary, the Used Automatic Wrap Around Packer Vanta 2100 bph stands as an optimal solution for the packaging of cans, glass, and PET bottles. With advanced technical specifications and the ability to handle diverse product and packaging sizes, this machine offers unmatched value in the bottling industry, blending versatility, efficiency, and precision into one comprehensive tool.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 320 mm, conveyor belt width: 430 mm, type of input current: three-phase, total width: 520 mm, total length: 800 mm, total height: 1,380 mm, Wrapping Machine Bedpfx Alowc Iqpjbswn Erka Model: WMB 30 For all types of sticks such as Kornspitz, pretzels, and lye sticks, etc. TOP combination – wrapping machine for strands/pretzel strands Simple, robust croissant wrapping machine in stainless steel design Long roller 300 mm, foldable Exclusive DGUV V3 tested by us Connection 400V, 16A-CEE plug Refurbished used machine with warranty and spare parts service Optional: Maintenance contract Service package Delivery service Instruction & commissioning Leasing & rental service We also have other top croissant wrappers in stock!

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 06/2027, working width: 400 mm, conveyor belt width: 600 mm, type of input current: three-phase, total width: 790 mm, total length: 820 mm, total height: 1,300 mm, TOP Wrapping Machine Universum Kasper Model: HWM 40/60 Bsdpswc H R Iefx Albswn Suitable for all types of sticks such as Kornspitz, pretzels, lye sticks, etc. Universal combination wrapping machine For shaping and rolling all types of dough Croissant wrapping machine with integrated long roller below For ropes and pretzels up to max. 600 mm in length Mobile machine Connection: 400V, 16A CEE plug Dimensions: 790 x 820 x 1300 mm (W x D x H) Refurbished used machine with warranty & spare parts service Options: With conveyor Service package Delivery service Maintenance contract Spare parts box Training & commissioning Visit our large croissant wrapping machine exhibition!