Used Okuma Lvt 300 for sale (227)

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced Podpsxxidaefx Ahyjgk - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Pedpfxexxh Udj Ahyegk Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor Pgodpfxexxihfe Ahyok - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation Pgjdpfx Aoxxifkshysk

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Pgjdpswu I Irofx Ahyjk Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Podpfxju U E Avj Ahysgk Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Pedpjtqu U Tofx Ahyjgk Trimming machine

Condition: used, Year of construction: 2017, operating hours: 33,500 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have a CNC lathe for sale, brand Okuma-Genos, which is ready for operation. The machine is fully functional and has been regularly maintained and serviced. - Y-axis - Main and sub spindle - Tool probe - Parts catcher Spindle speed: 3800 rpm Spindle operating hours: 20,503 h Pgjdpow Np Uhjfx Ahysk A detailed description of the machine is included in the attachment. Technical condition: Good. The machine has been in our facility since new, purchased in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. Viewing and functional inspection possible under power in our workshop. Reason for sale: ongoing changes in our projects. Optionally, an LNS bar feeder may be purchased for €7,000 and an oil mist separator for €1,500 (both visible in the pictures).

Condition: used, Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have an Okuma Genos CNC lathe for sale, fully operational and immediately ready for work. The machine is in excellent working order, regularly maintained and serviced. - Main spindle and sub-spindle Psdpsw Np S Hjfx Ahysgk - Tool probe - Parts catcher Spindle speed: 3,800 rpm Technical condition: Good. The machine was purchased new for our facility in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. It is possible to inspect and test the machine under working conditions at our site. The decision to sell is due to changes in our projects. Optionally, an LNS bar feeder is available for €10,000 and an oil mist separator for €1,500 (both visible in the photos).

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Pedpfx Ajx I Nbtehyjgk Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127728, Okuma MULTUS B300 5-Axis CNC Turning and Milling Center (2006) Okuma OSP-P200L controls Renishaw Probe Chip Auger Under maintenance / parts missing Pgjdpfx Aox Ap A Dohyek Sublocation - Building 3

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 MACHINE DETAILS Podjxxi Uljpfx Ahysgk Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Condition: good (used), Year of construction: 2021, functionality: fully functional, Description: Podpfx Asx H Ifbjhysgk The machine is in good technical condition and can be tested by prior arrangement. Accessories include: tool holders, tailstock centers, 7 driven tools, tool probe. Available for delivery – 03-04/2026.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU3000EX, Power kVA: 34.2 Pgjdpfxox Hg Eyo Ahyok

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Pedpswq Rpwjfx Ahyjgk Height: 1970mm Weight: 6100kg

Year of construction: 2019, operating hours: 1,370 h, condition: excellent (used), functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Spindle power (20 min/continuous): 22 / 15 kW Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm Pedpfent T Afex Ahysgk

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS Pgedont T Auepfx Ahysk dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,044 h, functionality: fully functional, machine/vehicle number: 223697, turning length: 950 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, rotational speed (max.): 5,000 rpm, Machine with Big-Bore Spindle TECHNICAL DETAILS Spindle speed: 45 to 4,200 rpm Podpfx Aswnqdishyegk Spindle motor: 30/22 kW Spindle mount: JIS A2-8 Spindle bore: ø91 mm Axes and Travel Turning length: 950 mm Turning diameter: 340 mm C-axis control: 360° at 0.001° increments X-axis travel: 260 mm Y-axis travel: 120 mm; +70 mm / −50 mm Z-axis travel: 1,010 mm Tool Turret Turret type: V12, radial, for L and M tools Tool holder mount: VDI Speed: 45 to 6,000 rpm Rotary tool motor: VAC 7.1/4.1 kW Control CNC control: OSP-P300LA with 15" touch panel Pitch error compensation: X-/Y-/Z-axes Workpiece ejection detection: available Smart Interface: included API Library 2: activated Virus Protection System - OSP-VPS: available Software Functions One Touch IGF Advanced M-E Kit: standard Optional IGF Advanced M-D Kit: available Multitasking coordinate conversion: available Profile generation: available Cycle time inspection and reduction: available Hi-Cut Pro: available Load monitoring, spindle & feed axes: available NC operation monitoring: available Spindle speed control: variable Y-axis turning: available Helical milling for MY machine: X/Y surface, Y/Z surface Cooling and Lubrication Coolant pump: 0.25 kW Coolant tank: L-type, replacing I-type High-pressure coolant pump: 0.8 kW Lubrication monitoring: A-1 incl. hydraulic pressure monitoring Dimensions and Construction CE marking and EMC: available IEC standard compliance: available Power supply CE-compliant: adapted to local standards Guideway extension for steady rests: available TAS-C: available Chip and Coolant Management Chip tray: side extraction Chip conveyor H-type: side, CE-compliant Fully enclosed with coolant protection: available MACHINE DETAILS Height: 2,444 mm Footprint: 3,420 x 2,041 mm Weight: 6,600 kg

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Pgodpfsuhbnnjx Ahysk

Condition: excellent (used), OSP P200M Control Working travels 1000 x 1000 x 900 mm Tool changer with 200 Positions Spindle speeds 50- 12'000 rpm Spindle taper SK50 6 paletts 630 x 360 mm B-axis Table 360 ° Cooling through spindle Tool breakage control Clamping cubics 3D measuring taper Chip conveyor Misc. accessories MARCELS MASCHINEN AG Pgedpey Hqv Nefx Ahyjk

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw Podpfeh D Anasx Ahyjgk chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Pgjdpfxey Ed Ayj Ahyjk Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter Pgodpfxoyvfhde Ahyok - Renishaw probe - Extraction unit - Various accessories

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka Pgsdjx D S Ekspfx Ahyek • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Condition: used, 4 Axis Year Of Manufacture: 1998 Pgodpfey Drunex Ahyek 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control