Used Oku Automatic for sale (23,160)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1424140083, Elumatec sawing machine SAS 142/141 with dust extraction system Year of manufacture: 2008 Cutting accuracy: 0.5-0.6 mm Itodpoz Rpgwjfx Ahbjn Dust extraction system: Year of manufacture: 2008 For sale only to dealers and commercial businesses. Due to the age and operating hours, no guarantee or warranty is provided.

Condition: good (used), Year of construction: 2019, Schuler BEUTLER press Type: MC 4000 Year of manufacture: 2017 Pressing force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Installed height: 750 mm Table area: 3,000 x 1,400 mm Ram area: 3,000 x 1,300 mm Itjdpez Szrhofx Ahbon Press weight: 72,000 kg including GSW Schwabe strip feed line Strip width: 80 - 500 mm Strip thickness: 0.8 - 4.0 mm Coil capacity: 5,000 kg

Year of construction: 2014, condition: used, functionality: limited functionality, machine/vehicle number: 02/2014, The flat pouch packaging machine is suitable for packaging bulk products, granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be filled and an intermittent supply of packaging material. All packaging operations are performed in automatic mode. The equipment has been taken out of production, had no issues, but has not been used for three years, so it may require refurbishment. Itsdpfxjz Ryfwe Ahbjn Stored in a covered, enclosed warehouse.

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: Itjdew Hrrrspfx Ahbon 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: like new (used), Year of construction: 2017, The device was ordered but not integrated into the production line, meaning it never went into series production. The system was originally planned to convey a small lid for a sensor clip. Lanco Integrated Linear conveyor at the output: Type LF28 / 4.5-5.5 kg Vibration feeder VZ: VZ 500 Z-L (vibration bowl) Control unit SV2-2-8z (OKU ID No.: 14420) Paper documentation available The original price was €20,000 Itedpjv Uqm Sofx Ahbjn

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Ijdpfxjd H Hmho Ahbjtn Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Vibration conveyor, vibratory conveyor, vibration feeder, feeding device, storage container with automatic feeding, spiral conveyor -Manufacturer: Oku Automatik, spiral conveyor vibration feeder with frequency control -Type: VZ 1000 SR -Frequency converter: Müller Kurtz MFS 168 -Work basin: Ø 670 mm -Outlet width: 300 mm -Work basin height: 245 mm Iedporwqb Iefx Ahbjtn -Screw conveyor: elastically mounted -Connection: 230 volts -Transport dimensions: 1070/810/H730 mm -Total weight: 293 kg

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, For sale is a fully automatic carton erector, Knecht AS-500, manufactured in 2013, with two carton magazines and a hot-melt bottom sealing system. The system is sold complete, including the control unit. The system was used in a packaging line for car rims. It removes the carton blanks from the magazines using vacuum suction cups, erects them, and seals the bottom with four hot-melt beads per inner flap. If one magazine is empty, the system automatically switches to the second magazine. Equipment and technical data according to the order documentation: - Two pallet magazines with motorized lifting mechanisms and erecting frames - Loading of the magazines with pallets using a hand pallet truck - Processing of cartons according to FEFCO 0201 - Hot-melt system from UES with a four-module application head - Length and position of the glue beads adjustable via the control panel Iedpjz Suvyofx Ahbstn - Carton transport with servo motors - Vacuum pump from Schmalz - Control system: ELAU C-400 - Operation: Touch panel MP 277 - Performance: 8 cartons per minute - Carton length: 400–650 mm - Carton width: 400–650 mm - Carton height: 150–500 mm - Working height: 750–800 mm - Electrical connection: 400 V, 50 Hz - Electrical power consumption: 12 kW - Compressed air: 6 bar; consumption: 2.5 liters per carton - Format changeover: partially automatic, partially manual - Changeover time: approx. 2 minutes, excluding emptying and refilling of the magazines The used system has been regularly maintained and is in very good condition. It is being sold due to a business closure and was in operation until it was dismantled. In its dismantled state, a functional test is no longer possible. An inspection at the location in 36381 Schlüchtern is possible by arrangement. The system can be loaded onto a truck on site. A video of the packaging line and detailed system documentation are available upon request. A Knecht VS-500 carton closer is offered separately.

Condition: good (used), Year of construction: 2011, functionality: fully functional, cutting height (max.): 80 mm, Equipment: CE marking, scorer, Panel dividing saw (horizontal) Felder / Format 4 Type Kappa Automatic KA75 4300 x 4300 Year of manufacture 2011 Horizontal panel saw from a carpentry workshop Cutting length 4300 mm Feed length of material support 4300 mm Saw blade overhang max. 80 mm Saw motor 9 kW Scoring saw 1.1 kW 9 Clamping devices Quick-clamping system for main and scoring saw blades (ProLock) Electronic cutting height adjustment Automatic recognition of cutting length via laser sensor on the saw carriage Feed rate steplessly adjustable, approx. 5 - 100 m/min., return speed approx. 130 m/min. Itsdpfx Ahsz Rvfmobsn 3 Air cushion tables (1x 2300 mm, 2x 1800 mm) Electronic control system: Modular control system with 24" TFT flat-screen display. The control system is prepared for online connection and for connecting a label printer. Without optimization software – this remains with the previous owner!

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 260 mm, control type: NC control, overall weight: 1,100 kg, Equipment: lighting, Band saw machine Manufacturer: Meba Type: Meba Profiline 260-AP Year of manufacture: 2004 Control system: Meba Serial number: XXXX Technical data: ----- - Cutting range 90° round: 260 mm - Cutting range 90° rectangular: 300 x 260 mm - Cutting speed: 15 - 150 m/min (AC drive) - Drive, saw band: 1.5 kW - Scrap length, automatic: 90 mm - Scrap length, manual: 10 mm - Cutting pressure: infinitely variable / electric - Saw frame guided twice via linear guides - Material feed via controlled feed clamp ..with hydraulic material full-stroke clamping - Saw band dimensions: 3,350 x 27 x 0.9 mm - Machine weight: approx. 1,100 kg Itjdpsz Hbgasfx Ahben Accessories: ----- - 5x saw band, new

Condition: good (used), Year of construction: 2019, Professional automatic packaging machine, also suitable for large packages. For example, for packaging food, technical articles, printing and paper products, household and toy goods, and textiles. -Up to 10 programs can be stored via the display. -Automatic welding frame movement. -Automatic residual film winding. -Automatic product discharge via the outfeed conveyor. -Process start manually via a push button. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt can be adjusted steplessly in height via a hand crank. -Welding frame approximately 870 x 620 mm. -Maximum package length approximately 850 mm. -Maximum package width approximately 600 mm. -Maximum package height approximately 300 mm. -Welding frame movement is electrically powered. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film width approximately 800 mm. -Perforation possible via 3 adjustable needle rings. -Roll holder can be moved separately. -Product insertion can be adjusted separately. Itodpfxez Sn Tfe Ahben -The machine can be moved or secured via lockable castors. -Machine dimensions approximately: Length 2 m x Width 1 m x Height 1.5 m. Multilingual documentation including operating instructions, spare parts lists, and circuit diagrams is included in the scope of delivery. The machine can be demonstrated while powered.

Condition: used, Year of construction: 2013, functionality: fully functional, For sale is a used Knecht VS-500 case sealer, manufactured in 2013, with automatic size adjustment and tape closure. The machine was used in a packaging line for car rims. The cartons are fed through the machine via side conveyor belts. Pneumatically operated levers fold the top flaps; the cartons are then sealed with self-adhesive tape. According to the order documentation, an additional bottom sealing system with self-adhesive tape is also included in the ordered configuration. Equipment and technical data according to the order documentation: - Output: 8 cartons per minute - Carton length: 400–650 mm - Carton width: 400–650 mm - Carton height: 150–500 mm - Automatic size adjustment - Tape width: 50–75 mm - Tape overhang on the end faces: 70 mm - Side conveyor belts, 100 mm high - Control system: PLC S7-300, CPU 312-C - Operation: Touch panel TP 177 - Belt monitoring above and below for end-of-tape and tape breakage - Jam monitoring at the machine outlet and compressed air monitoring - Protective cover made of plastic glass and safety doors with safety switches - Machine dimensions according to the order: approx. 2,300 × 1,800 × 2,600 mm - Electrical connection: 400 V, 50 Hz; Power consumption: 1 kW - Compressed air: 6 bar; Consumption: 2 liters per carton The system has been regularly maintained and, according to the current condition report, is in very good condition. It has already been disassembled and is being sold due to a business closure. Itjdpfxoz Suzio Ahben An inspection at the location in 36381 Schlüchtern is possible by arrangement. The machine can be loaded onto a truck on-site. A video of the packaging line and detailed system documentation are available upon request. A Knecht AS-500 carton erector with two carton magazines is offered separately.

Year of construction: 1997, condition: used, functionality: limited functionality, machine/vehicle number: 9.037, The flat pouch packaging machine is suitable for packaging granular and powdered materials, spices, and cream powders into paper-based or composite film packaging. It requires a continuous supply of the material to be packaged and an intermittent supply of the packaging material. All packaging operations are performed in automatic mode. Itsdpez Ryhxefx Ahbsn In 2006, the packaging machine underwent a complete overhaul and was equipped with an automatic twin-scale dispenser as an additional machine unit. As a result, the machine is suitable for dispensing not only powdered materials but also granular materials (e.g., coffee, pasta, soup granules, etc.). The equipment was removed from production; there were no problems with it, but it has not been in operation for a long time and may therefore require refurbishment. Stored in a covered, enclosed warehouse.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks. Itedpfxe Aaw Uae Ahbsn

Condition: good (used), Year of construction: 2011, functionality: fully functional, Mitsubishi controller, Itodpjz Ryz Esfx Ahbjn tapping spindle, loading magazine.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Fanuc control system, Turning and milling lathe, Pick-up spindle, Itsdpfxsz Ryyne Ahbjn Tool magazine.

Year of construction: 2020, condition: used, The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the boxes, dispensing system, weight: 370kg, with documentation. An on-site inspection is possible. Iodpfxsz S Iwdj Ahbotn

Condition: excellent (used), Year of construction: 2012, Professional automatic packaging machine from a renowned European manufacturer. Suitable, for example, for packaging food, technical articles, printing and paper products, household and toy goods, and textiles. -Electromotive sealing frame movement (no pneumatics required). -Stable foot switch for manual activation. Alternatively, automatic process start is possible by entering a time interval on the display. -Sealing frame dimensions: 500 mm x 400 mm. -Tunnel opening: Width 450 x Height 230 mm. -Maximum film roll width approx. 600 mm. -Conveyor belt can be adjusted steplessly in height using a hand crank. -Perforation possible via 2 adjustable needle rings. -Roll holder is adjustable. -Product insertion is adjustable. Iedpfx Aoz Sy Sashbetn -Machine can be moved and locked in place using rollers. -380 V / 50 Hz / 5.0 KW. -Installation dimensions approximately: Length 2.2 x Width 0.9 x Height 1.5 m. -Weight approximately: 270 kg. Numerous adjustment options on the control panel: -Automatic mode / Manual mode. -Tunnel temperature. -Sealing temperature. -Cooling time / Holding time during sealing. -Transport time of the conveyor belt. -Transport speed of the roller chain. -Cycle time for automatic operation. Multilingual documentation with operating instructions, parts lists, and circuit diagrams is included in the scope of delivery. The machine has been used little and then stored for several years. It can be demonstrated while powered on.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Used, well-maintained, fully automatic bandsaw machine "JAESPA", model: Comfort 260A Cutting range for round/square/rectangular materials: 260/260/320 x 200 mm Itjdpfx Asz Tdk Aohbon Band speed: 15-100 m/min, continuously adjustable via frequency inverter Band dimensions: 3660 x 27 x 0.9 mm Technical data and dimensions: Subject to change.

Condition: excellent (used), Year of construction: 2015, HANWHA STL 38 YEAR 2015 CAPABILITY TO USE 3 TOOLS SIMULTANEOUSLY BAR FEEDER, DIAMETER 38 10-POSITION TURRET SIEMENS CNC LONG PART EJECTOR FROM BACK SPINDLE CHIP CONVEYOR HIGH-PRESSURE PUMP, 50 BAR TOOL HOLDER KIT IEMCA BAR FEEDER Itedpfsz S Ik Dsx Ahbjn

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (manufactured in 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 2160 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Ijdozpbcvopfx Ahbotn Technical features: Cutting area: approximately 5300 mm in length 2160 mm in height Control: fully electronic positioning and touchscreen operation for serial cuts. Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. The machine operated flawlessly until it was disassembled; all parts, as shown in the pictures, have some signs of wear and tear. Location: in storage at 54634 Bitburg.

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm No of Bottom Units: 3 Iedsu Rv Ukspfx Ahbjtn

Condition: like new (used), Year of construction: 2023, operating hours: 12,147 h, functionality: fully functional, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Citizen A20-3F7 + FMB Minimag 20 bar FEEDER Year: 2023 7 axes: X1, X2, Y1, Z1, Z2, C1, C2 Itodsz D Tx Nepfx Ahbjn Removable guide bushing: can be used in both Swiss-type (sliding headstock) and fixed-headstock configurations. Maximum main spindle speed: 10,000 rpm Machining length: 200 mm X2 axis with linear guides Simultaneous C-axis control on both the main and sub-spindle, with back-working driven tools Short cycle times thanks to the advanced CNC control (Fanuc FS32i) Maximum machining diameter: 20 mm (standard) Machining length per chucking: 200 mm, or 2.5 × D in fixed-headstock mode Main spindle: 10,000 rpm, 3.7 kW Sub-spindle: 8,000 rpm, 1.5 kW Gang-type driven tools: 6,000 rpm, 0.75 kW Back-working driven tools: 6,000 rpm, 0.75 kW Compact footprint: approx. 2.5 m² Polygon turning function Equipped with an FMB Minimag 20 bar feeder.

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Itodpfx Ahowz Ev Tebon Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Year of construction: 2022, condition: excellent (used), Fully automatic pallet wrapper with film pre-stretching Inventory no. 3974 Isdpsz Rq Sbofx Ahbetn Manufacturer: Matco Type: B 200 * Year of manufacture: 2016 * Turntable positioning via fixed stop * Number of bottom and top wraps * Turntable diameter: 2000 mm * Max. wrapping height: approx. 2700 mm * Own weight: approx. 550 kg * In very good condition * Suitable for Euro pallets and block pallets!!! * Ramp