Used Oerlikon Citopuls Mxw 420 Digital for sale (72)

Condition: used, Excellent welding quality with advanced processes and capabilities • New inverter generation with 30% lower power consumption compared to conventional devices. This performance results in significant energy cost savings. • Over 100 synergy curves for almost all base materials (factory-equipped) • Wide process variety: Isdpfx Ajwwtwdjquoic - MIG/MAG Standard - MIG/MAG Pulse - MIG/MAG Special Arc Types - MIG Brazing - Manual Metal Arc Welding (basic, rutile, cellulosic) - Gouging with up to 8.0 mm electrode diameter • High-performance machines with up to 500 A at 60% duty cycle • Automation interface A1, no additional cards required for simple, analog integration • 99 memory slots • Password-protected parameter locking (fine adjustment within +/-20% still possible) • Program selection via torch button • Simple polarity change

Condition: excellent (used), Here, we offer a Pfeiffer vacuum pump station. Iedpfezdqr Nox Aqusic Pfeiffer vacuum pump WKP 500 A Model PP W31 928 / X 2161 n: 2800 1/min Oil: P 3 1.5 l S(N2): Theoretical 500 m³/h Weight: 125 kg Motor type: EELQ-8T Oerlikon Leybold SCROLLVAC SC 60 D Ultimate pressure: 0.01 mbar Motor: 3-phase, 200/400 V, 50/60 Hz Pumping speed (50 Hz): 52 m³/h Pumping speed (60 Hz): 62 m³/h Oil-free High effective pumping capacity Low ultimate pressure Low-vibration operation Type: WOD 410 B Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2000, Technical details: Iijdpsv N Hiljfx Aqusc max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. *

Condition: good (used), Machine is in good condition. Iisdpfxozb Nfqj Aquec

Condition: used, functionality: fully functional, For sale is an Oerlikon bevel/worm gear unit of the E 37 EX 2 series, serial number 828499L01.1. The unit comes from a fully functional installation and is suitable for test benches, special purpose machines, and industrial drive applications. Ijdsypb Iyepfx Aquoic Technical specifications (general): Manufacturer: Oerlikon Type: E 37 EX 2 Design: Bevel/worm gear unit Application: Test bench technology, mechanical engineering, industrial drives Condition: used, functional

Condition: used, Year of construction: 2000, Oerlikon Sulzer Metco HVOF coating system, DJCE Iiodpfx Aqezb Agboujc complete system with burner, control unit, and powder feeder Combustible gas: propane, ethylene, or hydrogen possible has been in storage for several years.

Condition: used, Technical details: Length: 1120 mm height: 1480 mm power consumption: 500 A capacity at 100% ED: 390 A capacity: 23 KVA welding current: 390 V weight of the machine approx.: 234 kg dimensions of machine: 1,12 x 0,58 x 1,48 m capacity: 23 kVA Hose package with welding gun Iisdpfx Ajwqpl Djqusc Ground cable *

Condition: used, Technical details: welding current: 440 V weight of the machine approx.: 242 kg dimensions L x W x H: 1,5 x 0,8 x 1,3 m MIG/MAG control unit: with 2/4-cycle switchover with 3x12 welding stages Cooling system: water-cooled with frost protection Shielding gas with solenoid valve and pressure reducer Hose package 3.6 m long Isdpovz Advjfx Aqujic Torch head Ground clamp with ground cable 4.8 m long Wire feed with 4 roller drive for wire diameter: Ø 1.0 mm/Ø 1.2 mm *

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Iiodpfey U Nqnjx Aquoc

Condition: used, 85879, S1500SN, Leybold Vacuum Turbostream, vacuum pump, Rev2006 AB, SN: S30000625916 Iodpfohc Tldsx Aqujic Model: 85879 Type: S 1500 SN Condition: Used

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump with frequency converter Ioderfxgbopfx Aqueic Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Note on condition: free of contamination

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Iiedey Uyf Nopfx Aquoc

Condition: used, Year of construction: 1941, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 860 mm, turning length: 2,500 mm, center height: 400 mm, workpiece weight (max.): 10,000 kg, spindle bore: 57 mm, total length: 5,100 mm, total width: 1,860 mm, rotational speed (min.): 6 rpm, rotational speed (max.): 250 rpm, Equipment: documentation/manual, For sale: Oerlikon DM4S conventional lathe, manufactured in 1941. Dimensions: Estimated weight: 10 tons Center height: 400 mm Iedpfx Aqjy Taploueic Footprint: 1860x5100 mm Distance between centers: 2500 mm Spindle bore: 57 mm Options: Multi-fix turrets 4-jaw chuck/faceplate Ø1050 mm Rapid traverse Many accessories… Inspection and testing possible at 1822 Chernex, Switzerland. Price: €10,000 (negotiable) Travel and transport costs are the responsibility of the buyer. More photos and videos are available upon request. Please contact me for further information.

Condition: used, Year of construction: 1987, greates pass round over bed 560 mm swing diameter over face slide 365 mm turning speed range - main spindle 11,2 - 2.240 min/-1 drive capacity - main spindle 15 kW spindle head No. 8 Isdey Nfblspfx Aqusic spindle diameter in front bearing 100 mm spindle bore 62 mm machine weight ab. 2,5 t dimensions of the machine ca. L 3,5 x B 2,0 x H 2,2 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has undergone a geometric overhaul. Technical features & accessories: - 3-axis digital readout, Fagor - Rapid traverse Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Tailstock taper: 5 MK Isdpfx Aevzn Itsqujic Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D weight of the machine ca. 4000 kg Ijdpfxoy D T Sus Aqujic dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Iedjy I S Rwopfx Aquoic

Year of construction: 2002, condition: used, z-travel 200 mm Clamping diameter of the cutter heads max. 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting cone for cutter heads Nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and Iijdpfjy A S U Ssx Aquoc test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 2006, voltage 110 - 230 V frequency range 50 - 60 Hz Power connection 0,5 kVA Dimensions (HxWxD) 1000 x 800 x 1750 mm weight 150 kg Measuring machine for bar knives. Ijdpfx Aqoyhq T Ajujic Equipment/accessories: -Measuring tools -Clamping devices -Computer -Monitor -Printer -Cabin -Technical documentation

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t Iiodpsukitxsfx Aqujc dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: new, We offer you Oerlikon Leybold WSU 1001H. Iiodpfx Asrf T Etequoc The pump is new. If you are interested, just send us your message. We will then get in touch with you.

Condition: used, We offer you Oerlikon Leybold WSU 2001. The pump is used. If you are interested, just send us a message. We will then get in touch with you. Iodperf T Dysfx Aqusic

Condition: new, We offer you Oerlikon Leybold WSU 2001. Iiodpfx Aorf T Aqoqusc The pump is new. If you are interested, just send us a message. We will then get in touch with you.

Condition: used, We offer you Oerlikon Leybold WSU 1001 H. Isdperf T Ezefx Aqujic The pump is used. If you are interested, please send us a message. We will then get in touch with you.

Condition: used, turning diameter over bed 1000 mm turning diameter over slide rest 640 mm turning length 6300 mm Isdpfx Aoyqva Tequoic turning dia. in gap 1250 mm spindle diameter 50 mm speed 6-925 U/min Coolant 3-jaw chuck Ø 500 mm 4-jaw chuck Ø 900 mm Steady rest Ø 300 mm Steady rest Ø 560 mm Power compound Multi Fix Toolholder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team