Used Opti B 33 Pro for sale (86,183)

Condition: ready for operation (used), A small column drilling machine Optimum is available. Drilling capacity steel/cast iron: 30mm/35mm, spindle mount: MK4, speed: 2000rpm, quill stroke: 120mm, quill diameter: 75mm, column diameter: 115mm, table dimensions X/Y: 500mm/420mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/1950mm, weight: approx. 220kg. An on site inspection is possible. Guedpfx Aoxxbaasg Dsk

Condition: used, Spindle mount: MK 2 Connected load: 750 W // 400 V // 50 Hz Gjdpfxjt Rmbyo Ag Dsuk Drilling performance: 25 mm

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Storage location: Nattheim Gsdpsvvi Ausfx Ag Douk

Condition: new, Optimum OPTIdrill B 17 PRO basic bench drill 3003161 With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 565mm Width/depth (product) approx. 275mm Height (product) approx. 840mm Weight (net) approx. 36.5kg Drilling capacity Drilling capacity steel (S235JR) 15.5mm Continuous drilling capacity steel (S235JR) 12mm Drilling table Drilling table work surface length 235mm Drilling table work surface width 220mm Drilling table type T-slot diagonal Drilling table T-slot size 12mm Distance spindle - drilling table max. 325mm Speed range Speed range 680 - 2700min¯¹ Number of speed ranges 5 Electrical data Supply voltage 230V Gedjt N Irwopfx Ag Djuk Mains frequency 50Hz Machine base Distance spindle - machine base max. 530mm Machine base work surface length 170mm Machine foot working surface width 180mm Machine foot T-slot size 14mm Machine foot T-slots quantity 2 Machine foot T-slot distance 148mm Machine foot length 210mm Machine foot width 215mm Spindle Quill stroke 65mm Spindle holder MK 2 throat 152mm Motor(s) Spindle motor drive power 0.49kW SCOPE OF DELIVERY Quick-action drill chuck 1 - 15.5 mm Morse taper MK 2 (B 16) T-nuts

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S - removed from running machine Godpfx Ajp Rb Hcog Dsuk - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min Gusdpfx Agoq Nrmrj Djk column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: used, Central unit, control, switchgear, CPU, PLC -Manufacturer: B&R Bernecker & Rainer, Minicontrol with Control Panel -Product number: MCGE33-0 -Individual components: see photos -Dimensions: 255/130 / H220 mm Guedpfjgypu Ssx Ag Dok -Weight: 2.3 kg

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 22 mm throat 180 mm bore stroke 120 mm total power requirement 0,75 kW weight of the machine ca. 70 kg Features: Gsdpfx Ajxyln Deg Deuk V-belt drive via aluminum pulleys Safety switch according to IP 54 Drilling depth stop Drilling table ± 45° tiltable Height-adjustable drilling table via rack and pinion with diagonal T-slots and surrounding cooling water channel 400 V version

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 720912MFAB, working width: 330 mm, overall weight: 121 kg, type of input current: AC, input voltage: 230 V, total width: 522 mm, total length: 1,450 mm, total height: 1,224 mm, Perfect working Morgana Autocreaser Pro 33. This well-maintained machine is available immediately. Gusdpfxoxuggde Ag Djk

Condition: excellent (used), Year of construction: 2017, Ref:11008 . 2017 Morgana AutoCreaser Pro 33 + AutoFold Pro High speed, combination creasing & folding line. User friendly, single operator, standalone machines that are run in tandem to crease and fold digitally printed, heavy weight or cross-grained stock. Features: Morgana AutoCreaser Pro 33: Uses a unique creasing rule and matrix system to prevent cracking & tearing. Gujdow U Ddbjpfx Ag Dok 7" 'SmartScreen' touch screen controls all main functions. Automatically calculates where the creases need to be and sets them accordingly. Alpha-numeric memory allows an unlimited number of jobs to be stored. ‘PosiFeed’ feed system allows product to be piled higher and able to feed difficult stocks. Morgana AutoFold Pro: Can be aligned to Morgana AutoCreaser Pro to give perfectly folded results on a wide range of both digitally or litho printed stocks. It is simply wheeled up to the creaser and the height of its vacuum feed conveyor is adjusted to the exit height of the creaser. The same 7" SmartScreen, instructs on length of pre-creased sheet and which fold to produce. Alpha-numeric memory allows an unlimited number of jobs to be stored. Crease & fold without cracking, Flying knife technology prevents scuffing and marking on digital stocks. Specification: Feeding System: Bottom suction feed Max. Sheet: 700mm x 330mm (27.5” x 12.6”) Min. Sheet Size (in automatic mode): 210mm x 140mm (8.5” x 5.5”) Max. Paper Thickness: 0.4mm (varies according to hardness, fold type & substrate) Max. No. Creases per Sheet: 16 Min. Distance Between Creases: 0.1mm Max. No. Stored Programmes: Unlimited Min. Crease Distance from Leading Edge: 2.5mm Min. Crease Distance from Tail Edge: 35mm In Hand Feed Mode up to 2499.9mm to Last Crease can be Programmed. Speed per Hour (A4 in half): 8500 Speed per Hour (A5 in half): 11000 Dimensions: L: 1450mm H: 1224mm W: 522mm Weight: 121Kgs (+50Kgs packing) Power Requirement: 1 phase 220 / 240v AC Speed per hour (A4 in half): 6240 sph. (Autofold Pro) Power requirement: 240V, 50/60Hz

Condition: excellent (used), functionality: fully functional, mileage: 114,500 km, power: 105.18 kW (143.00 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,700 mm, first registration: 06/2017, emission class: euro6, color: white, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), sliding door, 🇬🇧 Mercedes-Benz Sprinter 314 CDI F37/33 EURO 6 B 20 units available from 2017 / 2018 -Mileage: 114,500 / 230,000 km -Tires at 50% PERSONALIZED FINANCING OR LEASING AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 MONTHLY INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES BRANCH DOMENICO ESPOSITO S.P.A., EBOLI (SA) BRANCH – OFFICIAL DEALER FOR MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30 am / 7:00 pm - SATURDAY 8:30 am / 2:00 pm Guodpovmcdasfx Ag Dek WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-Trailer – Refrigerated Semi-Trailer – Tipper Trailer – Lamberet - Schmitz - Isuzu – Flatbed – Crane – Tipper – 4 Axles – 4 Rear Axles – Tway/T-Way-540-460 HP – Xway/X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtain Sider – Box Body – Tail-Lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl accepts no liability for any discrepancies concerning technical specifications, optional features or characteristics that may differ from those stated in this description. Please verify the features of the specific vehicle.

Condition: used, -Bearing type: spherical roller bearing Gsdpsb A Rzzjfx Ag Deuk -Type: 23224. VB 33. MB -Brass cage -Lubricating groove -Bore Ø: 120 mm -Outer diameter Ø: 215 mm -Width: 76 mm -Weight: 12.5 kg

Condition: new, Aircraft AIRBAU 652/100 B PRO piston compressor Mobile compressor with combustion engine for up to 14 bar operating pressure for working environments without a power connection. TECHNICAL DATA Dimensions and weights Length (product) approx. 1050mm Width/depth (product) approx. 500mm Godpfx Agst H N Nxo Dsuk Height (product) approx. 1060mm Weight (net) approx. 121kg Electrical data Drive engine1 cylinder / 4-stroke engine Power input6.6kW Noise emission Sound power level Lw99dB(A) Explanation Sound power levelSound power level in accordance with DIN EN ISO 3744 (Directive 2000/14/EC) Compressor Compressor systemHOS Suction capacity approx.642l/min Filling capacity approx.480l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders2 Number of compression stages2 Compressor speed950min¯¹ Compressed air tank Maximum pressure14bar Tank capacity100l EQUIPMENT Pressure control Filter pressure regulator Automatic pressure switch CONDOR Drive transmission V-belt Compressed air line material Flexible armored hose line Compressed air preparation Filter pressure regulator Compressed air tapping A quality quick coupling Compressed air tank Powder-coated Tank base Two wheels with PU foam tires, one rubber buffer

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 255 mm bore stroke 120 mm morse taper 4 MK table: 385 x 335 mm turning speeds 80 - 2130 U/min total power requirement 1,1 / 2,2 kW weight 125 kg range L-W-H 460 x 900 x 1730 mm Furnishing: - Surface-machined work table Gusdpfxoxaaqgj Ag Dek - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 106570506, throat depth: 250 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 120 rpm, total height: 1,700 mm, column diameter: 92 mm, total width: 720 mm, total length: 900 mm, spindle mount: MK 4, drilling depth: 120 mm, table width: 430 mm, table length: 480 mm, overall weight: 135 kg, type of input current: three-phase, input voltage: 400 V, Dear Sir or Madam, Gujdpfev T A Dmex Ag Dsk We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Gsdpjgulr Hjfx Ag Deuk Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: new, Optimum OPTIdrill D 33 Pro pillar drill action set 3003040SET Gujdpet N Iuxjfx Ag Djk with V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 915mm Column diameter 92mm Width/depth (product) approx. 450mm Height (product) approx. 1705mm Weight (net) approx. 132kg Drilling capacity Drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 25mm Drilling table Drilling table work surface length 475mm Drilling table work surface width 425mm Drilling table T-slot size 14mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drill table max. 695mm Speed range Speed range120 - 1810min¯¹ Number of speed ranges9 Electrical data Drive motor power 1.1kW Supply voltage 400V Mains frequency 50Hz Machine base Distance spindle - machine base max.1180mm Machine foot working surface length 410mm Machine foot working surface width 325mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 250mm Spindle Quill stroke 120mm Spindle holder MK4 throat 254mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 4/B16 T-nuts Machine vice BMP

Condition: new, B&R 0PS3200.1 Power Supply / Power Unit SN: AF651013325 - 3-phase / 24VDC / 20A, unused in opened original packaging (film is still sealed), 100% functional, delivery contents as shown in photos. Gsdpjx Ht Axsfx Ag Deuk

Condition: used, B&R Provit controller 5C2001- removed from Battenfeld BA 6 CDC - removed from running machine - fully functionalmanufacturer: B&R Guodpfx Agjiyzv So Dsk manufacturer no.: 5C2001.18 spare part no.: BR177 If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: ready for operation (used), functionality: unexamined, A good used B&R Touchscreen control panel from a Cintex Checkweigher - came out of working machine Gjdpfx Agjwzvmio Douk Ready to ship worldwide We look after export documentation and shipping if required

Condition: new, B&R 0PS3200.1 Power Supply / Power Unit SN: AF651013330 - 3-phase / 24VDC / 20A, unused in opened original packaging (protective film still sealed), 100% operational, scope of delivery as per photos. Gedpsx Ht A Eefx Ag Dsuk

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F - removed from running machine Godpfew Ah Nrjx Ag Douk - fully functionalmanufacturer: B&R manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer.

Condition: new, Year of construction: 2025, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guodpfx Aog Uaiueg Dek Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine. Gedoxqf U Sepfx Ag Deuk

Condition: as good as new (ex-display), Year of construction: 2025, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Gujdpfodqzbnox Ag Djk Guaranteed concentricity