Used Novus J 170 for sale (7,580)

Year of construction: 1976, condition: used, Machinetype: Hinge joint fence machine Make: WAFIOS Type: HJGM Prsdpew Rq Avofx Af Seb Constr. year: 1976 wire diameter range: 2,0-3,0 mm working width: 2000 mm vertical distance of wires: 150 mm

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 50 h, load capacity: 200 kg, empty load weight: 6,910 kg, construction height: 2,040 mm, fuel type: electric, total length: 6,840 mm, drive type: Elektro, arm reach: 9,430 mm, construction width: 1,750 mm, working height: 16,900 mm, Articulated boom lift Condition (technical): very good Psdexhbdwopfx Af Serb

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Pjdpezx D Efofx Af Serb

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle diameter: 200 mm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Pjdpfxozz Rt Us Af Sjrb Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: used, Year of construction: 2018, Machine no. 6, serial no. 245127, control system, manufacturer Arburg Selogica, clamping force 500 kN, screw diameter 20 mm, handling system, manufacturer TecnoMatic, type micro cnc, on-machine dryer, manufacturer Piovan, type DPA20, conveying device, serial no. 5012216, year of manufacture 2017. Predpez Hl Hdefx Af Ssb

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 2 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 20,000 m³/h, filter area: 295 m², noise level: 75 dB, actuation type: electric, total height: 3,643 mm, total length: 2,066 mm, total width: 1,756 mm, overall weight: 1,590 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, NOVUS Airtower FT 20,000 EC – like new – only 2 operating hours Prjdpfozfx Risx Af Seb For sale is a NOVUS Airtower FT 20,000 for extracting welding fumes in industrial halls. The unit was used exclusively for testing purposes and currently has only 2 operating hours. The Airtower has been technically inspected and is in perfect working order. All features are functioning correctly. There are no damages. Equipment: * NOVUS Airtower FT 20,000 * ECblue efficiency package * NOVUS particle sensor * NOVUS lighting package * Timer * Automatic filter cleaning * 3 filter stages * Total filter area 295 m² * Dust container 200 liters * Plug & Play, no piping required * Forklift attachments and crane eyes Technical data: * Airflow rate: approx. 20,000 m³/h * Motor power: 15 kW / 400 V / 50 Hz * Dimensions: approx. 2,066 x 1,756 x 3,643 mm * Weight: approx. 1,590 kg * Sound pressure level: < 75 dB(A) A guard was removed during the testing phase and has already been reordered. This will be professionally installed before delivery. Price: €27,900 net, negotiable, plus VAT. Sale exclusively to businesses. Location: 48691 Vreden. Inspection possible by appointment. Loading can be arranged on-site.

Condition: used, Year of construction: 2008, operating hours: 1,505 h, 2008 | Manitou 170 AETJL | Used Articulated Boom Lift | 1505 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 34 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Prjdezl U Dxspfx Af Sjb 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41076 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), functionality: fully functional, “IFE MPL 1700 J-E” for Sale Psdpfju Tkrmex Af Ssrb Manufacturer: IFE Aufbereitungstechnik GmbH Type: MPL 1700 J-E Magnet L x W x H: 1.075 x 1.710 x 353 mm. AA.: Ca. 1.850 mm. Belt widthness: 1.800 mm. (New Belt) Weight: 3.280 KG

Condition: excellent (used), Catalog number 7807 TECHNICAL DATA - track width 350mm - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table dimensions 1900x790mm Predpfxjzwwvzj Af Seb - height from base to table 830mm - top - 2 rows of pawls/ejectors - 2 smooth, metal feed rollers - saw arbour - 2 feed rollers, pressure rollers - bottom - guide strip - pawls/ejectors - track - electric height adjustment of the machine body - central lubrication - stepless speed adjustment via frequency inverter - feed motor 4kW - main motor 75kW - dust extraction nozzle diameter 2x150mm - overall dimensions L/W/H 2050x1800x1800mm - weight approximately 3500kg ADVANTAGES - German-made - DTR documentation available - used multi-blade saw - very good condition Net price: 58900 PLN Net price: 13700 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Pjdpoyq Nl Njfx Af Serb Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: used, mileage: 91,190 km, power: 92 kW (125.09 HP), first registration: 06/1981, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, * Steyr 91.170 4x2 * Articulated boom lift up to 25 meters * Manual transmission * Fully leaf-sprung suspension * VIN: 8910841394 * Engine Type: 612603313 * kW: 92 * Displacement: 6595 ccm * Unladen weight: 13795 kg * Gross vehicle weight: 16000 kg * Wheelbase: 5600 mm * Vehicle length: 11700 mm * Vehicle width: 2500 mm * Vehicle height: 3450 mm * Tires: 11 R 22.5 Prsdpfx Aekq Ap Esf Sjb * Subject to differential taxation * All information without guarantee Tel./WhatsApp:

Condition: used, Year of construction: 2022, machine/vehicle number: 2022063, functionality: fully functional, operating hours: 1,577 h, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,600 mm, total length: 1,756 mm, total width: 2,066 mm, overall weight: 1,590 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Novus airtower filtering station with a capacity of 20,000 m³/h. Year of production: 2022. The device is still in operation and can be inspected in working condition. Podpfx Ajyvpz Nef Sjrb

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, displacement volume: 59 cm³, total length: 3,000 mm, total width: 1,600 mm, total height: 3,480 mm, overall weight: 3,540 kg, Equipment: documentation/manual, ARBURG Allrounder 375 V 500-170 Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold opening distance: 302 mm Opening stroke: 225 mm Platen size (diameter): 900 mm Ejector force: 70 kN Centering of moving platen (diameter): 125 mm Mold weight: 230 kg Predpfsz Ayhqox Af Sjb Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 ccm Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 N Number of heating zones: 5 Dimensions & Weight Machine dimensions (L x W x H): 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment Screen text in German Rotary table Hydraulic core pull (1x) Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate locking

Condition: good (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 85 cm³, total length: 4,200 mm, total width: 2,100 mm, total height: 3,600 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ARBURG Allrounder 1200 T 1000-170 Stock No.: 503459 Manufacturer: ARBURG Type: Allrounder 1200 T 1000-170 Control System: Selogica Year of Manufacture: 2013 Operating Hours: 22420 h Technical Data - Clamping Unit Clamping Force: 1000 kN Minimum Mold Height: 400 mm Maximum Mold Distance: 700 mm Opening Stroke: 300 mm Platen Size (Diameter): 1200 mm Ejector Stroke: 175 mm Ejector Force: 25 kN Centering of Moving Platen (Diameter): 125 mm Centering of Fixed Platen (Diameter): 125 mm Mold Weight: 1150 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 85 cc Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 120 mm Number of Heating Zones: 4 Nozzle Distance: 210 mm Dimensions & Weight Machine Dimensions (L x W x H): 4.2 m x 2.1 m x 3.60 m Total Weight: 7300 kg Podpsz A Dmzjfx Af Sorb Equipment 3x Temperature Control Units for Hot Runner Screen Text: German CEE Socket 16A Compact-Flash Drive Rotary Table Freely programmable inputs (2) and outputs (2) Machine with Material Hopper Machine with Water Manifold Needle Gate Nozzle, Hydraulically Actuated EUROMAP 67 Handling Interface Servo-Controlled Hydraulic Pumps Wear-Resistant Plasticizing Unit

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, Mazak Machining Center 5-Axis (4 + 1 Positional) Variaxis J-500 Model Year 2013 Psdjzxpv Njpfx Af Sjrb Mazatrol Matrix Nexus 2 CNC

Condition: good (used), Year of construction: 2011, operating hours: 59,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 30 mm, clearance between the columns: 270 mm, injection pressure: 2,000 bar, total length: 3,180 mm, total width: 1,430 mm, total height: 1,850 mm, overall weight: 2,110 kg, warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm Podpfoz Eax Ejx Af Sjrb ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG equipment included incl. Spruepicker screen text german screen text german core pulling hydraulically 1x Anti vibration mounts

Condition: used, Year of construction: 2021, operating hours: 2,525 h, Equipment: all wheel drive, JCB 540-170 Telehandler from year 2021 with only 2,525 operating hours! * Manufacturer: JCB * Model: 540-170 4x4x4 * Lift height: 17 meters * Lifting capacity: 4 tons * Year of manufacture: 2021 * Recorded operating hours: approx. 2,525 * Sway = Level compensation * Operating weight: 12,300 kg * Good condition! * Pallet forks Psdjz Expvepfx Af Serb * Additional hydraulics * Video available on request (WhatsApp) * Bucket available at extra cost! * Price: €52,900 net + 19% VAT For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee or warranty. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Pedpfx Afoz Efwyo Sorb Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Podpfx Aez D Ur Ref Serb Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz Prjdpfxez D Utbs Af Sob

Condition: excellent (used), Year of construction: 2008, Manitou 170 AETJL Aerial Work Platform with 16.90 m Working Height The 170 AETJ-L aerial work platform makes even the most remote work areas easily accessible. Equipped with an articulated structure, this model boasts exceptional offset and overhang capabilities, allowing you to work at various heights and in different locations without having to reposition the machine. Take advantage of its flexible hydraulic movements for precise positioning within the work area! With its perforated platform floor, tilt and load sensors, cylinder valves, and negative braking system, the 170 AETJ-L aerial work platform ensures safe operation. ...] This machine complies with: European Directives: 2006/42/EC - Machinery (recast EN 280:2013) - 2004/108/EC (EMC) - 2006/95/EC (Low Voltage) Manufacturer: Manitou Design: Articulated telescopic boom lift Prodpoqazadjfx Af Sjb Type: 170 AETJ Operating hours: 994.6 Year of manufacture: 2008 Capacity Working height: 16.90 m Ground clearance (access): 0.40 m Platform height: 14.90 m Maximum lateral reach: 9.43 m Overhang/articulated joint: 7 m Body rotation angle (top/ground): +65° / -65° Work platform load capacity: 200 kg Superstructure rotation: 355° Work platform rotation (right/left): 66° / 59° Number of persons (inside / outside): 2 / 2 Weight and tire size Weight of work platform: 6910 kg Work basket dimensions (length x width): 1.20 m x 0.92 m Overall length: 6.84 m Overall width: 1.75 m Overall height: 1.97 m Overall length (retracted): 5.12 m Height (retracted): 2.04 m Length of boom: 1.26 m Counterweight offset (superstructure at 90°): 0.08 m Outer turning radius: 4.30 m Ground clearance (center of wheelbase): 0.14 m Wheelbase: 2 m Performance Travel speed - transport mode: 5 km/h Travel speed - working mode: 0.60 km/h Grade capability: 22 % Permissible inclination in working mode: 3° Tires Non-marking solid rubber tires Drive wheels (front/rear): 0/2 Steering wheels (front/rear): 2/0 Braked wheels/wheels: 0/2 Motor/Battery Electric motor rated power 2 x 4.50 kW Electric emergency pump: 3.70 kW Battery: 48 V Battery rated voltage/capacity: 48 V x 240 Ah Battery energy: 11 kWh Integrated charger (V): 48 V / 30 A Financing through our bank is also available. komplett-konzept.leasingo.de More new and used items - find them in our shop! International shipping costs on request!

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Pedpfxozvliys Af Sjrb Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 48390-115-3078, We are offering this ready-to-use Metso M&J 4000 M pre-crusher, manufactured in 2012. Manufacturer: Metso Pjdpfszm Eiuex Af Ssrb Model: M&J 4000 M Serial number: 48390-116-3078 Year of manufacture: 2012 EC type approval: e1*97/68HA*2004/26*0346*00 Machine no.: 14 of 50 Engine ID: 942.992-C-0837-242 If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 34435, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table width: 120 mm, table length: 3,050 mm, table height: 970 mm, throat depth: 405 mm, ram plate length: 3,050 mm, distance table to ram: 400 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila Pedpfezk H A Dsx Af Ssrb • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe • 2 supports, front

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, For sale is a highly efficient, perfectly coordinated recycling combination package from the German market leader WEIMA, consisting of the single-shaft shredder WL 600 and the hydraulic briquetting press C 170. Both machines are of German manufacture (“Made in Germany”) and have operated with absolute reliability. Psdszgq Trepfx Af Sorb We only used this machine for a short time because the project we had planned, involving deadwood from the natural forest, did not work out. However, this had nothing to do with the machine's functionality. We are sending the machine back to Germany because there is no market for it in Chile. We will add more pictures today of the packaged system, which will begin its journey next week.