Used Niles for sale (69)

Condition: good (used), Year of construction: 2022, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, hobbing software. Nkjdew Tzfgopfx Ah Hot

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 turning-milling center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y-axis -200 / +400 mm, B-axis 0.001°, B-axis swivel range -105° / +95°, tool changer with 192 positions, C-axis main spindle 0.001°, spindle speed up to 1,750 rpm, 2 gearbox stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Nedjw T Ag Espfx Ah Hokt

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Njdpfx Ahswbuyzs Hekt

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Nksdpfx Ajxnpf Noh Hst Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Year of construction: 2004, turning length 1.300 mm spindle diameter 120 mm spindle bore 38 mm control SIEMENS - 840 D numbers of positions in the tool changer 12 tool taper VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. Nkodpfxsxa Hkys Ah Hot The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2

Year of construction: 1979, condition: good (used), For sale comes: 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Nkjdonl D U Sspfx Ah Het Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Free location Saxony

Condition: ready for operation (used), Year of construction: 1971, turning diameter over bed 800 mm turning diameter over slide rest 480 mm turning length 3000 mm turning diameter in the slot 850 mm center height over bed 380 mm Nkedpfxswwatrj Ah Hst bed width 550 mm spindle head DIN 55022/8 spindle bore 73 mm speeds 18 - 900 U/min feeds 224 / 0,018-10 mm/U thread - mm pitch ca. 84: 0,2 - 224 mm total power requirement 17,5 kW weight of the machine ca. 8,6 t dimensions of the machine ca. 5,5 x 1,8 x 1,72 m Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates, hardened bed guides, double-tiebar bed for high rigidity, high- positioned front guideway and low-positioned rear guideway in the V-prism for high accuracy, and triple bearings for the lathe spindle, threads in mm, inches and diametrical pitch. The year of manufacture is estimated. Many accessories! Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 4,500 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 5,200 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates timely collection by the end of September! Turning and milling center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Turning length: 4,500 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Travel paths Travel - x2: 875 mm Nkjdpjw Da R Defx Ah Het Travel - z2: 5,200 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power type/Frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 170 kVA Rated current of the machine: 220 A Total weight: 40.0 t

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 3,000 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 3,700 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates you to timely collection by the end of September! Turn-mill center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Turning length: 3,000 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Turning diameter over cross slide: 740 mm Travels Travel - x2: 875 mm Travel - z2: 3,700 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power supply/frequency: 3PEN / 50 Hz Nedpfx Ahow Dbnds Hskt Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 166 kVA Rated machine current: 215 A Supply fuse: 250 A Total weight: 31.0 t

Condition: used, Year of construction: 2007, Nominal length (workpiece length) mm 3500 Swing diameter over bed slide left mm 720 Swing diameter over bed left mm 760 Swing diameter over bed slide right mm 720 Nodpfxevyamxj Ah Hokt Swing diameter over bed right mm 760 Working height mm 1,223 Slide travel flat (left/right) mm 305 / 435 Slide travel longitudinal (left/right) mm 3151 / 3154 Control Siemens 840 D

Condition: good (used), Year of construction: 1996, There are two similar machines Available Workpiece dimensions: ® 650 x 1000mm Nodpfournyyox Ah Hekt Axes: 4-axes Tool turret: Two 12-position tool turrets Tailstock: Yes CNC control: Siemens Sinumerik 840 Weight: Approx. 9.5 tons Chip conveyor: Yes Chip breaker: Yes Tool monitoring: ATIS Tool monitoring system

Condition: excellent (used), Year of construction: 2002, Technical Specifications: Workpiece Capacity: Maximum swing over bed: ~500 mm Maximum turning diameter: ~400 mm Maximum turning length: ~1000 mm Maximum workpiece weight: ~500 kg (depending on configuration) Spindle: Spindle bore: ~80 mm Spindle speed range: ~50-3000 rpm (variable) Spindle power: ~15-20 kW Axis Travel: X-axis (cross): ~300 mm Z-axis (longitudinal): ~1000 mm Tooling: Turret type: Typically a 12-station turret Tool holder type: VDI or similar Quick-change tooling system Accuracy: Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Coolant System: Integrated coolant system Coolant tank capacity: ~200 liters Machine Dimensions: Length: ~3000 mm Width: ~2000 mm Height: ~2500 mm Njdpsvx Svvofx Ah Hekt Weight: ~5000 kg Power Requirements: Voltage: 400V, 3-phase Frequency: 50/60 Hz Power consumption: ~15-20 kW

Condition: ready for operation (used), Specifications Manufacturer NILES Model ZSTZ 08 CNC Condition Used Stock Number in fabbrica Max diameter 800 mm Max module 14 Min-max number of teeth 5-315 Machine weight 14500 kg Machine dimensions 6000x3500x2800 mm min-max grinding wheel revolution 100-1250 rpm Description Equipped with Njdpfx Aov Iaqgoh Hjkt New electrical system