Used Niles for sale (64)

Condition: used, Year of construction: 2004, turning length 1.300 mm spindle diameter 120 mm spindle bore 38 mm control SIEMENS - 840 D numbers of positions in the tool changer 12 tool taper VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dodpfx Absxa Hkyo Tola #Tags: N-10 | N 10 | N10/2 | N10-2

Year of construction: 1979, condition: good (used), For sale comes: 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Dodpjnl D U Sofx Ab Tsla Free location Saxony

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm workpiece length - max. 1100 mm max. module 20 (25) mm min. module 0,5 mm control Siemens Sinumerik 840 D total connected load 62 kVA Djdpfx Absw Rrbye Tjla helical angle -45 / + 120 ° weight of the machine ca. 10 t

Condition: ready for operation (used), Year of construction: 1971, turning diameter over bed 800 mm turning diameter over slide rest 480 mm turning length 3000 mm turning diameter in the slot 850 mm center height over bed 380 mm bed width 550 mm spindle head DIN 55022/8 spindle bore 73 mm speeds 18 - 900 U/min Dlodpfx Abewwatre Tja feeds 224 / 0,018-10 mm/U thread - mm pitch ca. 84: 0,2 - 224 mm total power requirement 17,5 kW weight of the machine ca. 8,6 t dimensions of the machine ca. 5,5 x 1,8 x 1,72 m Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates, hardened bed guides, double-tiebar bed for high rigidity, high- positioned front guideway and low-positioned rear guideway in the V-prism for high accuracy, and triple bearings for the lathe spindle, threads in mm, inches and diametrical pitch. The year of manufacture is estimated. Many accessories! Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, A used, overhauled Niles ZSTZ 630 C3P. Max. gear diameter: 630 mm Dledsxaptkopfx Ab Toa Gear width: 215 mm Max. module: 12 Min. module: 1 Stroke length: 225 mm Table diameter: 500 mm

Condition: used, Year of construction: 2013, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well Dljdpsv N Razefx Ab Tja as subject to prior sale!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 3,000 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 3,700 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates you to timely collection by the end of September! Turn-mill center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Turning length: 3,000 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Turning diameter over cross slide: 740 mm Travels Travel - x2: 875 mm Travel - z2: 3,700 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power supply/frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 166 kVA Rated machine current: 215 A Dljdpfsw Dbndjx Ab Tja Supply fuse: 250 A Total weight: 31.0 t

Condition: good (used), three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories Dodovbbmcspfx Ab Tola -Weight 14.4 kg

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 Dlodpjw Rf Tiefx Ab Tea - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 4,500 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 5,200 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates timely collection by the end of September! Dodpfxjw Da R Dj Ab Tjla Turning and milling center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Turning length: 4,500 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Travel paths Travel - x2: 875 mm Travel - z2: 5,200 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power type/Frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 170 kVA Rated current of the machine: 220 A Total weight: 40.0 t

Condition: used, Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 Djdpeb A Rd Nofx Ab Tela -Chuck size: Ø 200 mm -Beeks: individually and completely adjustable -interchangeable jaws -Through hole: 55 mm -Rezess: Ø 160 mm -Number: 1x feed available -Price: per piece -Weight: 16 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm Dlodpfx Aedq Tt Heb Toa -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Djdpfed R Exdex Ab Tsla -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Rohm, three-jaw chuck Chuck size: Ø 250 mm -Type: DH-B / 8-250 x 3 TGL 30-2332 -Throughout: Ø 40 mm - Hole circle: Ø 171 mm -Shot: short taper 8 -Weight: 24 kg Dljdog Rcy Tepfx Ab Toa

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Dledpfxjd Itcqj Ab Tja -Chuck size: Ø 250 mm -Rezess: Ø 210 mm -Throughout: Ø 80 mm -Weight: 20.7 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm Dedpfx Abjb Enccs Tola -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH: B200x3x6 Dledpfxjd R Edto Ab Tea -TGL: 30-2332 -Chuck size: Ø 200 mm -Cone: Ø 104 mm -Hole circle: Ø 132 mm -Through hole: Ø 54 mm -Weight: 15 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m Dlsdpfsd It Ibjx Ab Tsa -Through hole: Ø 54 mm -Weight: 12 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -recess recess: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg Dledpsd Ew T Aefx Ab Toa

Condition: used, Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks Djded Itclspfx Ab Tjla -Chuck size: Ø 250 mm -Short taper: 8 -Thread: M30 -Pitch: 1.5 mm -Weight: 38.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg Dsdjd Irazjpfx Ab Tsla

Condition: used, Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine Dljdob A Ryfopfx Ab Tja -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Price: per piece -Number: 40x available -Weight: 0.6 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm Djdedrwlxopfx Ab Tsla -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm Dlodpfxod Im S Hs Ab Tsa -Thread recording -Through hole: Ø 53 mm -Weight: 19.7 kg

Condition: used, Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed Dljdpfxsd It H Rs Ab Tea -Feed size: Ø 250 mm -Weight: 35.5 kg