Used Niles for sale (69)

Condition: ready for operation (used), Year of construction: 1961, Manufacturer: WMW NILES lathe DLZ 630 Condition: used Turning diameter over bed: 630 mm Feed: quer: 0,018-1,25 mm/U Hollow: 70 mm Centre height: 290 mm Spindle speed: 22,5 – 1120 / 18 step U/min Turning length: 2000 mm Total power requirement: 15,0 kW Turning diameter over bed: 630 mm Ncsdpfxsdwfdfe Ad Nol Weight of the machine ca.: 4,2 t Transport dimensions lxwxh: 4,5×1,35×1,5 m Turning diameter over slide: 340 mm If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), functionality: fully functional, Used gear grinding machine Niles ZSTZ 630i. The machine is fully functional; a video can be provided upon request. Ncedoxzfugjpfx Ad Nol

Condition: used, functionality: fully functional, machine/vehicle number: 40/35-22, Price on request Nedowl Aunspfx Ad Nscl Used Gear Grinding Machine Brand: NILES Type: ZSTZ 630 C3 Max. gear diameter = 630 mm Tooth width = 215 mm Module = 1 – 12 Number of teeth = 5 – 140 Table diameter = 500 mm Stroke = 500 mm Grinding wheel diameter = 270 – 350 mm Swivel range = 45° Strokes = 75 – 315 per minute Weight approx. = 6.3 t

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, 2 machines as spare parts donors. Servomotors MAIN SPINDLE MOTOR CHIP CONVEYOR Ncsdpfjixtm Nex Ad Njl CHUCK HYDRAULIC UNIT PRICE per ton

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is Ncodsv Nw Npjpfx Ad Njl very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm Nedswwaruepfx Ad Njcl c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2022, Niles N 30 MC - 4500 turning-milling center, year of manufacture 2022, Siemens SI 840 D SL control, travel X/Z 4756/725 mm, Y-axis +/- 250 mm, B-axis swivel range -105° / +95°, B-axis spindle speed up to 5,000 rpm, C-axis main spindle 0.001°, spindle speed up to 3,000 rpm, tailstock, steady rest, 144-position tool magazine, workpiece measurement, hobbing software. Njdpfow Tzfgjx Ad Nscl

Condition: good (used), Year of construction: 2019, Niles N 40 MC - 6000 turning-milling center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y-axis -200 / +400 mm, B-axis 0.001°, B-axis swivel range -105° / +95°, tool changer with 192 positions, C-axis main spindle 0.001°, spindle speed up to 1,750 rpm, 2 gearbox stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Ncodpfxew T Ag Es Ad Nsl

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Ncjdpowbuyzefx Ad Nol

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Ncsdpfxsxnpf Nj Ad Nel Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Year of construction: 2004, turning length 1.300 mm spindle diameter 120 mm spindle bore 38 mm control SIEMENS - 840 D numbers of positions in the tool changer 12 tool taper VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock. The machine is in well-maintained condition. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-10 | N 10 | N10/2 | N10-2 Ncedpfexa Hkyox Ad Nsl

Year of construction: 1979, condition: good (used), For sale comes: 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Ncjdpfxonl D U Ss Ad Njl Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Free location Saxony

Condition: ready for operation (used), Year of construction: 1971, turning diameter over bed 800 mm turning diameter over slide rest 480 mm turning length 3000 mm turning diameter in the slot 850 mm center height over bed 380 mm bed width 550 mm spindle head DIN 55022/8 spindle bore 73 mm speeds 18 - 900 U/min feeds 224 / 0,018-10 mm/U thread - mm pitch ca. 84: 0,2 - 224 mm Ncjdpfjwwatrsx Ad Nsl total power requirement 17,5 kW weight of the machine ca. 8,6 t dimensions of the machine ca. 5,5 x 1,8 x 1,72 m Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates, hardened bed guides, double-tiebar bed for high rigidity, high- positioned front guideway and low-positioned rear guideway in the V-prism for high accuracy, and triple bearings for the lathe spindle, threads in mm, inches and diametrical pitch. The year of manufacture is estimated. Many accessories! Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 4,500 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 5,200 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates timely collection by the end of September! Turning and milling center with tailstock and additional equipment! TECHNICAL DETAILS Machining area Turning length: 4,500 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Nsdpfx Aow Da R Djd Nocl Travel paths Travel - x2: 875 mm Travel - z2: 5,200 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power type/Frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 170 kVA Rated current of the machine: 220 A Total weight: 40.0 t

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 3,000 mm, turning diameter: 800 mm, travel distance X-axis: 875 mm, travel distance Z-axis: 3,700 mm, swing diameter over bed slide: 810 mm, Submission of a bid obligates you to timely collection by the end of September! Turn-mill center with tailstock and additional equipment! TECHNICAL DETAILS Njdpfx Adew Dbnde Nscl Machining area Turning length: 3,000 mm Swing diameter over bed: 810 - 760 mm Swing diameter over cross slide: 740 mm Max. turning diameter: 800 mm Turning diameter over cross slide: 740 mm Travels Travel - x2: 875 mm Travel - z2: 3,700 mm Control: SIEMENS - 840 C MACHINE DETAILS Electrical data Power supply/frequency: 3PEN / 50 Hz Rated voltage: AC 400 V Control voltage: DC 24 V Auxiliary voltage: AC 230 V Connected load: 166 kVA Rated machine current: 215 A Supply fuse: 250 A Total weight: 31.0 t

Condition: used, Year of construction: 2007, Nominal length (workpiece length) mm 3500 Swing diameter over bed slide left mm 720 Swing diameter over bed left mm 760 Swing diameter over bed slide right mm 720 Swing diameter over bed right mm 760 Working height mm 1,223 Slide travel flat (left/right) mm 305 / 435 Slide travel longitudinal (left/right) mm 3151 / 3154 Ncedevyamxopfx Ad Nsl Control Siemens 840 D

Condition: good (used), Year of construction: 1996, There are two similar machines Available Workpiece dimensions: ® 650 x 1000mm Axes: 4-axes Tool turret: Two 12-position tool turrets Tailstock: Yes CNC control: Siemens Sinumerik 840 Njdpfeurnyysx Ad Njcl Weight: Approx. 9.5 tons Chip conveyor: Yes Chip breaker: Yes Tool monitoring: ATIS Tool monitoring system

Condition: excellent (used), Year of construction: 2002, Technical Specifications: Workpiece Capacity: Maximum swing over bed: ~500 mm Maximum turning diameter: ~400 mm Maximum turning length: ~1000 mm Maximum workpiece weight: ~500 kg (depending on configuration) Spindle: Spindle bore: ~80 mm Spindle speed range: ~50-3000 rpm (variable) Spindle power: ~15-20 kW Axis Travel: X-axis (cross): ~300 mm Nsdpfx Adsvx Svve Nocl Z-axis (longitudinal): ~1000 mm Tooling: Turret type: Typically a 12-station turret Tool holder type: VDI or similar Quick-change tooling system Accuracy: Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Coolant System: Integrated coolant system Coolant tank capacity: ~200 liters Machine Dimensions: Length: ~3000 mm Width: ~2000 mm Height: ~2500 mm Weight: ~5000 kg Power Requirements: Voltage: 400V, 3-phase Frequency: 50/60 Hz Power consumption: ~15-20 kW

Condition: ready for operation (used), Specifications Manufacturer NILES Model ZSTZ 08 CNC Condition Used Stock Number in fabbrica Max diameter 800 mm Max module 14 Min-max number of teeth 5-315 Machine weight 14500 kg Nedpfxov Iaqgj Ad Nscl Machine dimensions 6000x3500x2800 mm min-max grinding wheel revolution 100-1250 rpm Description Equipped with New electrical system

Condition: ready for operation (used), Year of construction: 1983, overall weight: 4,400 kg, number of axes: 3, This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information. • Turning diameter over bed: 630 mm • Turning diameter over support: 340 mm • Turning length: 2000 mm • Centre height: 290 mm • Clearance: 70 mm • Spindle speed range: 22.5–1120 rpm (18 steps) • Feed, longitudinal: 0.036–2.5 mm/rev • Feed, transverse: 0.018–1.25 mm/rev Ncjdpfjx Imrcex Ad Nel • Total power requirement: 15.0 kW • Transport dimensions (LxWxH): 5.0 x 1.35 x 1.5 m • Tailstock taper: MK5 Additional equipment • 400 mm tapered bar chuck • 1 face plate, D=630 mm • 2 face plates with cross slots • 2 large steady rests (340 mm capacity) • 2 steady rests (center type) • 1 travelling steady rest • Heidenhain position indicator (DRO) • Various tool holders • Tool cabinet with tool holders • Steady rest box

Year of construction: 2018, condition: excellent (used), Hardly used at all. Installation dimensions (L,W,H) mm: 7,023 x 3,337 x 2,480 Ncodpfoychzmox Ad Nel Weight: 16 t Working area Centre distance: 3,000 mm Cross slide diameter: 650 mm Bed diameter: 700 mm X-axis travel: -15 ... +335 mm Machine equipment A11 main spindle, 2,000 rpm, 1,200 Nm (100%) Tailstock MK5, dragged 12 x KM40 tool holders Loading hatch for automatic loading & unloading 400V, 50Hz

Condition: good (used), Year of construction: 2007, Turning Length 3.500 mm Turning diameter 720 mm Some technical details are shown on photos. Ncodjx Hvvuopfx Ad Nel

Condition: used, Year of construction: 1999, turning diameter 270 mm turning length 630 mm control SIN840D swing over bed 400 mm swing diameter over slide rest 220 mm longitudinal slide -travel 745 mm cross slide - travel 200 mm turning speeds 10 - 4.000 U/min power capacity at 100 % load 15,00 kW spindle head DIN 55026 - Size 6 spindle bore 62 mm chucking diameter max. 315 mm feed x-axis 1 - 12.000 mm/min rapid traverse X-axis 12,00 m/min Feed z- axis 1 - 20.000 mm / min. rapid traverse Z-axis 20,00 m/min tailstock quill taper MT 3 quill stroke 112 mm quill pressure 10,00 kN tool taper DIN 69880 Ø 30 mm Tool drive speed max. 4.000 1/min total power requirement 37,00 kW weight of the machine ca. 4,00 t Ncsdpfx Asx Avp Rsd Nol dimensions of the machine ca. 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool holders.

Condition: good (used), three-jaw chuck, three-jaw lathe chuck Ncsdpfovbbmcox Ad Nsl -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm Ncsdpfod Ew T Aox Ad Nsl -Weight: 18 kg