Used Netstal for sale (23)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: SYNERGY S-1750-460 Baujahr: 2004 Schließkraft: 175 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 400 - 700 mm Öffnungsweg: 450 mm Schnecken DN: 50 mm Max. Hubvolumen: 314 cm³ Spritzteilgewicht in PS: 301 g 2 x Kernzug Bcjdpfx Aaoygdgmjfeu Schnittstelle Roboter Die Maschine wird ohne den abgebildeten SEPRO Roboter verkauft. Der SEPRO Roboter auf den Bildern ist nicht im Lieferumfang enthalten.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 2007057201, Ser. No.: 2.000.102 Absolute cycle counter: C120 = 048433176 Operating pressure (bar): 210 Injection force (kN): 693 Bcsdsyabfgjpfx Aafju Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75

Condition: excellent (used), Year of construction: 2015, Clamping force: 550 t Screw diameter: 62 mm Distance between tie bars V: 920 mm Bsdpfjxbd R Hjx Aafocu Distance between tie bars H: 1020 mm Mold thickness : 600-1050 mm Opening stroke max: 901 mm Injection pressure: 2400 var Injection volume: 749 cm3 Shot weight: 718 g Hot runner controlers: 16 x Hydr. corepullers: 2/3 (fixed/moving platten) Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 1993, Netstal 1750 /870 HP Bedpfeg U Arxjx Aafjcu Closing 175 TO Year 1993

Condition: excellent (used), Year of construction: 1993, Netstal 870/1500 HP Year of manufacture: 1993 Bcsdpjxvmm Hefx Aafeu Clamping force: 150 tons

Condition: good (used), Year of construction: 1990, Netstal 1000/445HP Closing 100 TO Scrow 40mm Stroke volume 44x44 Bcedpfxjgi D Thj Aafsu Year 1990

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm Bodpfx Asx Sr Evoafscu dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2004, 3 x Netstal injection moulding machines Netstal SynErgy 1750-460 injection moulding machine, year 2004 Bjdpfex Tracox Aafscu Netstal Synergy 2400 injection moulding machine, year 2004 Netstal Synergy 1500K injection moulding machine, year 2005 More technical data and images available upon request.

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, Bodpsrfbnmofx Aafscu clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Bcodpfjkv Uq Iox Aafju Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Bcjdskwb Dispfx Aafeu Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2014, operating hours: 78,610 h, condition: ready for operation (used), This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information. Application Types Bedpsx D N H Sofx Aafscu Injection Moulding

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Application Types Injection Moulding Bcedpfxex D Rlpo Aafju

Condition: good (used), Year of construction: 2015, Ref. no.: 18589 Hersteller: NETSTAL Type: Elion 1750-510 M Electric machines Year of construction: 2015 Clamping unit Clamping force: 175 ton Opening stroke: 450 mm Distance between tie bars: 560 x 560 mm Mould height min.: 500 mm Mould height max.: 800 mm Platen size (h x v): 830 x 845 mm Bcodpfx Aajxdxpcjfeu Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight: 193 g Injection pressure: 2400 bar Measurements and weight Dimensions: 7,1x2,2x2,0 m Machine weight: 12750 kg

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000 Distance between tie‑bars (tie bar spacing): 460 × 460 mm Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm Min. mould height: 250 mm Max. mould height: ≈ 550 mm Max. daylight (max open platen distance): sometimes specified high (depending on configuration) Injection / Plasticizing Unit: Screw (barrel) diameter: 40 mm in common version. Shot volume (max): ≈ 201 cm³ Shot (weight) for PS: often around ~193 g (depending on material) Injection pressure: varies by configuration (some data sources mention around 1750 bar or more) Bodpfx Aaewkg Txofscu Machine Dimensions & Weight: 10 400 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION800-270 Baujahr: 2007 Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Bcodpfowf I Hijx Aafsu Öffnungsweg: 350 mm Schnecken DN: 35 mm Max. Hubvolumen: 123 cm³ Spritzteilgewicht in PS: 118 g

Condition: excellent (used), Year of construction: 2010, Netstal SynErgy 2400-1700 Injection Moulding Machine Bjdexvcgpopfx Aafecu Year of manufacture: 2010 Clamping Unit: Clamping force [kN]: 2400 Min./max. mould height [mm]: 260–600 Maximum opening width [mm]: 1110 Maximum ejector stroke [mm]: 110 Injection Unit: Screw diameter [mm]: 62 – 25D Injection volume [cm3]: 749 Injection weight PS [g]: 696.57 Injection pressure [bar]: 2296 Electrical-hydraulic equipment: Rated pump motor power [kW]: 75 Heater power [kW]: 37.8 Dimensions and weight: Net weight with control cabinet [t]: 15.8 Languages: Polish, German, English, French

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2010019101, clamping force: 1,750 kN, screw diameter: 32 mm, injection pressure: 1,611 bar, ejector force: 50,000 N, opening stroke: 450 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 1,750 kN Opening stroke: 450 mm Mould mounting area: 500 x 800 mm Minimum mould height: 500 mm Ejector force: 50 kN Ejector stroke: 150 mm Dry cycle time: 1.4 s / 357 mm Injection Unit Screw diameter: 32 mm Shot volume: 80.4 cm³ Shot weight (for PS): 77.2 g Injection force: 129 kN Injection pressure: 1,611 bar Injection rate: 201.1 cm³/s Plasticising capacity: 17 g/s L/D ratio: 20 Screw speed: 590 rpm Screw torque: 250 Nm Nozzle retraction force: 25/50 kN Nozzle stroke: 510 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 5,462 x 1,931 x 2,042 mm Net weight: 10,650 kg Bsdpfx Aajxuqgbjfjcu Heating Specifications Number of heating zones: 6 Heating capacity: 8.4 kW EQUIPMENT Control panel with keypad 32 mm screw Rotameter with electronic flow control 2 cores (moving platen) 1 core (fixed platen) 2-stage sequential air injection Heated channels: 32 pcs Euromap 67 interface 6 vacuum sensors

Condition: excellent (used), Year of construction: 2015, Netstal EVOS 5500-2000 Injection Molding Machine Year of manufacture: 2015 Very compact, hydraulic, three-plate clamping unit with encapsulated lubrication system, ensuring an oil-free environment in the mold space. High-precision and wear-resistant linear guides guarantee maximum mold longevity and increased machine availability. The hybrid injection unit features a modular design and a flexible performance package (metering, clamping, injection) that can be adapted to specific applications. The highest plasticizing performance and optimal melt quality are ensured by selecting process-appropriate components. Servo-electric metering drive and state-of-the-art valve technology guarantee energy-efficient operation. Technical parameters Certification: CE in accordance with EU Directive 2006/42/EC (EN 60204, etc.) Mold installation height: 600–1050 mm Injection unit drive: metering axis speed up to 420 rpm, torque 2400 Nm Injection unit Injection speed: maximum dynamics thanks to high-performance servo valve technology Screw: 62 mm diameter, 25.2D length, version B – Three-zone screw made of hardened, wear-resistant tool steel – Injection pressure: 2400 bar – Injection volume: 749 cm³ Clamping unit Ejector force: 123.2 kN Main drive: Eco Powerunit 55 kW – Dual pump system with hydraulic accumulator – High-efficiency synchronous drive – Adaptive control technology for maximum energy efficiency Oil cooling: supply water temperature 35°C Base Cylinder head with open nozzle, prepared for pneumatic control Guide bushing R = 35 mm, through-hole D = 5 mm Mold plate hole pattern: Euromap standard Centering and ejector system Centering on nozzle-side plate: D = 125 H7 x 20 mm (Euromap) Through-hole in moving platen: D = 80 mm Ejector hydraulics positioned on the operator offside Ejector hole pattern: Euromap Ejector controlled Mold hydraulics 4 hydraulic circuits for auxiliary functions (ejector, cores, nozzle pins) Electrically controlled check valves in circuits A + B Free configuration of functions with position protection Nozzle hydraulics with needle shut-off 4 hydraulic circuits Flow speed and pressure manually adjustable Open/close function Special software: cascade control Pneumatics and cooling Water cooling battery and hot runner circuit – 4-section, switchable Bodpfx Aoxl Ul Aeafscu Pneumatics: 2x 3/2 valve, capacity 890 l/min Location: on operator offside at nozzle-side platen Electronics / Software / Interfaces Frequency: 50 Hz Power supply: 400V, 3P + N + E, tolerance ±10% (transformer required for larger deviations) Surge protection Mold heating: – 4 circuits at 3.3 kW each – 8 circuits at 0.75 kW each Connectors: HAN 16E for power and sensors, Euromap 14 Sockets: – 2x 16A CEKON (main switch-controlled) – 1x 32A CEKON with RCD (FI) switch Interfaces: – Euromap 15 – full implementation (parts 1–5) – SPC (Statistical Process Control) – Euromap 66 (control of 5 heating/cooling units) – Euromap 67 (robot interface for ejector and hydraulics) External fault signals: 2 inputs in control cabinet Operator identification: PIN

Condition: good (used), Year of construction: 2001, Netstal S-2400-900 injection molding machine Year of construction 2001 CLOSING SYSTEM Closing force / (Ton) 240 Bodpfx Aaorbzbbjfscu Space between columns (mm) 630x630 Plate size (H x V) (mm) 907x910 Mold height (max-min) (mm) 460-800 Daylight between plates / Space between plates (mm) min. 460 Opening stroke / Opening stroke (max.) (mm) 0-510 Ejector force / Ejection force ( kN) 59.4 Ejector stroke / Opening stroke (mm) 175 INJECTION SYSTEM Auger diameter (mm) 55 Injection weight (Max.) (Material)(g) 456 (PS) Injection volume / (cm3) 475 Injection pressure (bar) 1890 Injection speed (cm3/s) 2375 Nozzle force / Nozzle force (Max.) (Ton) 88 Nozzle stroke / Nozzle stroke (Max.) (mm) 200 Plasticizing capacity / plasticizing capacity (g/s) 70 Number of heating zones / number of zone heaters 6+1 cooling Heating power / heating capacity (kW) 30.3 OTHER DATA Oil tank capacity (Liters) 420 Weight (kg) 15800 Dimensions (DxSxW) 6950x2075x2480 mm

Condition: excellent (used), Year of construction: 2003, Netstal SynErgy 1500-600 injection moulding machine - year of manufacture 2003 - maximum short-circuit force 1500kN - injection unit 600 - screw diameter 50mm - injection volume 353 ccm Bodpfxsm Sgrzj Aafscu - injection weight 339 g - injection pressure 1890 bar - hydraulic ejector on moving platen - hydraulic core on movable disc - hydraulic core on fixed plate - two air valves - mould height 250-550mm - mould opening stroke 0-450mm - distance between columns 460 X 460 mm - machine weight 11 200 kg

Year of construction: 2004, condition: ready for operation (used), Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. Bjdpfsp S Srhex Aafecu

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Bcodpfx Aajwkiicofju