Used Nef 400 for sale (18,935)

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective Ledpfx Aozub Nmef Ssrt If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. The machine is immediately ready for full operation. Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Power supply: 3/N/PE Frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 24 V Power: 28 kVA Rated current: 45 A Fuse: 50 A slow-blow/quick-blow Lsdez Dbtzepfx Af Sort If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2013, We are offering this used AMIS ZBP 400 briquetting press, manufactured in 2013. We also include a Forst ARJES ZWS 110 wood shredder with a conveyor belt. However, these can also be sold separately. Amis Manufacturer: Amis Model: ZBP 400 Year of manufacture: 2013 Condition: used Ledpfszp Eyfsx Af Sjrt Machine type: Briquetting press Forst Shredder ZWS 110 with 30 kW motor 20 mm screen with electrical system with segmented base and slide with toothed rail Slide with roller guide Preparation for conveyor belt discharge Inclined conveyor belt AA = 1700 horizontal AA = 4500 vertical Belt width = 580 mm with PVC belt with metal-free zone with 1.5 kW drive If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2016, ROBOT ARM Lrsdpfxsz Ercce Af Sot MANUFACTURER: KUKA MACHINE TYPE: KR280 3080 fortec TECHNICAL SPECIFICATIONS PAYLOAD: 280 kg REACH: 3080 mm CONTROLS: KRC4 INCLUDING KL4000 DELIVERY FROM GERMANY WAREHOUSE

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 350 mm, total length: 15,000 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: rotational speed infinitely variable, FOR SALE: Kaltenbach KBS 400 DG + NA 400 – Automatic Band Saw Line High-quality German engineering tailored for professional structural steel fabrication. This Kaltenbach sawing line is engineered for high-volume production, delivering exceptional precision and a high degree of automation. The Package Includes: Kaltenbach KBS 400 DG: Semi-automatic band saw with double-sided mitre cutting capability. Kaltenbach NA 400: NC-controlled material feed system (push-type) enabling fully automatic series cutting. Roller Conveyors: Heavy-duty infeed and outfeed roller tables. Lrsdpfx Afoy Rvfwj Set Technical Specifications: Manufacturer: Kaltenbach GmbH + Co. KG, Germany Model: KBS 400 Year of Manufacture: 2008 Voltage: 400 V / 50 Hz Main Fuse: 35 A (Total current: 25 A) Control Voltage: 24 V DC / AC Key Features: Double Mitre (DG): Saw frame swivels in both directions, allowing precise angle cuts without the need to turn the workpiece. NC-Controlled Feeding: The NA 400 offers precise length measurements and automated feeding, increasing productivity and minimizing operator errors. Reliability: Kaltenbach machines are renowned worldwide for their robust frames and durable hydraulic systems. Condition: Well-maintained industrial equipment, immediately ready for operation. This setup is the ideal solution for steel fabricators seeking to automate profile cutting with proven, industry-standard technology.

Condition: used, Year of construction: 2002, x-travel 500 mm y-travel 300 mm w-axis 450 mm weight of the machine ca. 3,1 t Steuerung FANUC 16i-M Mit Erowa Wechsler Laufzeit 68.798h Ledpfozx Ha Ssx Af Sert Lader nicht im Lieferumfang Feuerlöschanlage Papierbandfilter GAP-Control Maschine ab Standort Transportsicherung und Verladung zu Lasten des Käufers

Condition: ready for operation (used), Year of construction: 2005, number of axes: 4, This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details. • Control system: Multipulse64 • Electrical specifications: • Main/operating voltage: 400 V (3-phase) • Frequency: 50 Hz • Control voltage: AC / 24 V DC Ljdjz Dv I Topfx Af Sert • Current consumption/power input: 15 A • Max. backup fuse: 25 A

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Ledjzwcfhjpfx Af Sort Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. 08/28.

Condition: used, Year 1989 Center height on the bed: 225 - 250 mm Distance between centers: 1500 mm Maximum turning diameter in the gap: 660 - 710 mm Maximum turning diameter on the bed: 455 - 505 mm Maximum turning diameter on the carriage: 270 - 290 mm Fixed steady rest bore diameter: 200 mm Traveling steady rest bore diameter: 130 mm Bed width: 330 mm Gap width: 250 mm Gap width at the carriage: 160 mm Maximum spindle diameter: 140 mm Spindle bore: 105 mm Reduction sleeve for spindle / Morse taper: No. 5 Tailstock Morse taper: No. 5 Speeds and Feeds • Spindle speeds: No. 16 • Speed values: from 23 to 1000 rpm (or 35 to 1500 rpm). • Longitudinal feeds: 0.06 - 0.84 mm/rev. • Transverse feeds: 0.03 - 0.42 mm/rev. Lrjdpfsz Dwl Tex Af Sst Threads • Metric pitches: 0.5 - 28 mm. • Module pitches: 0.25 - 14. • Whitworth: 2 - 112 threads/inch. Motor • Standard power: 7.5 HP. Machine comes with operating and maintenance manual. All technical data provided is indicative and may be subject to change without prior notice; therefore, it should not be considered binding.

Condition: ready for operation (used), DELTA LC 400 – Rotary table grinding machine - Magnetic clamping plate (rotary table) 400 mm - Max. grinding diameter 400 mm - Grinding height (distance table - grinding wheel) approx. 230 mm - Spindle speed 2850 rpm - Fine feed 0.01 mm - Distance column - grinding wheel axis approx. 320 mm - Spindle motor 3 kW - Grinding wheel dimensions 200x80x78 mm - Lateral grinding wheel dressing device - Machine housing - Coolant system Lrjdpfx Ajznvcbjf Set - Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight approx. 700 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Lsdpfx Afjzy I Nde Sjrt Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 135930-100, clamping force: 4,000 kN, screw diameter: 55 mm, clearance between the columns: 800 mm, column diameter: 125 mm, displacement volume: 546 cm³, injection pressure: 2,041 bar, injection weight: 497 g, mold height (min.): 350 mm, ejector force: 65,000 N, ejector stroke: 200 mm, opening stroke: 780 mm, plate length: 1,160 mm, plate width: 1,060 mm, installation height: 1,130 mm, total length: 7,650 mm, total width: 2,150 mm, total height: 2,300 mm, overall weight: 14,400 kg, heating capacity: 23.1 kW (31.41 HP), pressure: 240 bar, power: 45 kW (61.18 HP), Model: TM 400/1330 Year: 2014 Manufacturer: Wittmann Battenfeld Ledpfx Afjyw T Txj Ssrt Country of origin: Austria Weight: 14,000 kg Clamping force: 4000 kN (400 tons) Hydraulic system pressure: 250 bar Control system voltage: 24 V Power supply: 50 Hz, 3-phase Largest motor FLA Electrical cabinet: includes servo drives, safety relays, and hydraulic control boards

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min Ledpfx Afoz Etace Sjrt The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 500 mm, pressing force: 400 t, DGUV certified until: 07/2027, year of last overhaul: 2017, sheet thickness steel (max.): 7 mm, Edelhoff DARRW 2/400 – 400-ton pressing system with ALBA strip feeding system For sale is a complete mechanical pressing system, manufactured by Gebr. Edelhoff, type DARRW 2/400, manufactured in 06/1991, with an ALBA strip feeding system, coil unwinder, straightening unit, roller feeder, modernized Siemens SIMATIC control system, UNIDOR process monitoring, and MFP Z-conveyor, manufactured in 2025. The system is installed and can be inspected and demonstrated after prior appointment. Technical data of the press: Manufacturer: Gebr. Edelhoff Werkzeugmaschinenfabrik Type: DARRW 2/400 Year of manufacture: 06/1991 Machine No.: 9131 Design: mechanical twin-column stamping press Pressing force: 400 Mp / approx. 4,000 kN Table size: 1,100 × 1,500 mm Stroke adjustment: 40–120 mm Ram adjustment: 120 mm Stroke rate: 20–80 strokes/min Motor power: 45 kW Electrical system: 380 V Control system / process monitoring The machine control system has been modernized. Equipment includes: Siemens SIMATIC control system UNIDOR process/pressing force monitoring with visualization Screen-based operation Separate main control panel Additional machine-side control panel Integration of the strip feeding system into the system control Extensive switching and control technology ALBA strip feeding system Complete strip feeding system with several ALBA components, consisting of: Coil unwinder Coil holder with spreading mandrel Hold-down / guide arms ALBA straightening unit ALBA roller feeder Separate control unit for the strip feeding system Technical data of the strip processing: Strip width: max. 500 mm Material thickness: max. 7 mm Material cross-section: max. 1,800 mm² Strip speed: up to 25 m/min 2 transport rollers 8 straightening rollers Year of manufacture of ALBA components: 1991 The strip feeding system consists of several ALBA units with separate nameplates. Part removal MFP Z-conveyor Year of manufacture: 2025 Automatic part discharge from the pressing area Lodpfx Aezv Ukgef Sjrt Modernization / overhaul The pressing system underwent extensive overhaul in the years 2017–2019. The documented costs for the overhaul amounted to approximately €92,000. In addition, the system was equipped with an MFP Z-conveyor, manufactured in 2025. Inspection The press was last inspected on 07.07.2026 according to DGUV Information 209-030. Condition / Inspection The complete system is currently installed at the production site. Inspection and demonstration under production conditions are possible after prior appointment. Dismantling, relocation, and reinstallation Upon request, in addition to the machine sale, we offer the complete technical handling of the relocation: Professional dismantling of the system Preparation for loading and transport Relocation to the new production site Reinstallation and assembly at the destination Further services according to individual agreement The scope of services can be individually agreed upon and offered according to the buyer's requirements. Financing If the buyer has sufficient creditworthiness, a financing solution can be offered or arranged for the acquisition of the system. Details, term, and conditions will be determined after individual assessment and agreement. Further technical documents and information are available upon request. Technical data provided to the best of our knowledge and according to the available machine documentation or nameplates. Subject to errors and prior sale.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Lrsdpezrd Ugofx Af Sjt Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 3/4782, cutting length (max.): 3,500 mm, input current: 8 A, input voltage: 400 V, input frequency: 50 Hz, pneumatic connection: 6 bar, For sale is a well-maintained Langzauner LZ 2/2-3500 veneer saw, manufactured in Austria. The machine is in very good and well-maintained used condition and generally gives a very solid impression. The robust design of Langzauner machines makes this model particularly interesting for professional use in carpentry shops and wood processing companies. Technical data: Manufacturer: Langzauner Maschinenfabrik, Lambrechten/Upper Austria, Austria Type: LZ 2/2-3500 Factory number: 3/4782 Cutting length: 3,500 mm Cutting height: approx. 45 mm Main motor: 3.3 kW Connection: 3 x 400 V / 50 Hz Rated current: 7.5 A Jointing/planing unit: included CE marking: included The LZ 2/2-3500 is a robust industrial veneer saw for the precise cutting of veneers and sheet materials. The included jointing unit also enables the processing or jointing of the edges. The machine can be inspected and tested on-site while powered. An inspection and functional demonstration are possible after prior arrangement. Ledjz Ep I Nepfx Af Sert

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 18166, pressing force: 38 t, total width: 2,500 mm, total height: 2,500 mm, total length: 6,900 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 15,000 kg, oil tank capacity: 60 l, empty load weight: 5,350 kg, input frequency: 50 Hz, Equipment: documentation/manual, Avermann MPC 20 P/E/L/W – 20 m³ | Double-sided cable & hook connection | Extra-large feed opening For sale: Avermann MPC 20 P/E/L/W compaction container, year of manufacture 2012, with a capacity of 20 m³. This robust Avermann compaction container stands out due to its very large feed opening – the largest in its class. This allows larger and bulkier waste streams to be easily and quickly fed into the container. The feed opening is equipped with two separate lids that can be opened sideways, ensuring that the opening remains easily accessible and the machine can be used flexibly. In addition, this compaction container can be connected on both sides and is suitable for both cable and hook connections. This makes the machine particularly practical when different transport and removal systems are used. The machine is heavy-duty and suitable for professional use in various sectors, including industry, logistics, manufacturing, distribution, recycling, and waste processing. Technical specifications: Brand: Avermann Type: MPC 20 P/E/L/W Year of manufacture: 2012 Ljdpfx Afsz Ep R De Ssrt Serial number: 18166 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Max. working pressure: 200 bar Own weight: approx. 5,350 kg Permissible total weight: 15,000 kg Double-sided connection Suitable for both cable and hook connections Two sideways-opening lids on the feed opening Very large feed opening – the largest in its class Special features: Thanks to the very spacious feed opening, this compaction container is ideally suited for feeding in larger quantities and bulky materials. The two separate, sideways-opening lids ensure that the feed opening can be easily made fully accessible. The combination of double-sided connection and both cable and hook connections also makes this machine particularly flexible for transport and emptying. The machine is in used condition and shows signs of wear and tear, as can be seen in the photos. Technically, it is a well-built, industrial Avermann compaction container with a generous capacity of 20 m³. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price, or technical questions. Keywords: Avermann, AVOS, MPC20, MPC 20, MPC 20 P/E/L/W, 20m3 compaction container, compaction container, waste compactor, container compactor, double-sided connection, cable connection, hook connection, removal compactor, waste compaction, recycling, compactor, large feed opening.

Condition: good (used), Year of construction: 2003, functionality: fully functional, overall weight: 225 kg, faceplate diameter: 400 mm, DIVIMEK Meca DCN-400 NC rotary table Lodpfxezn Iv Hj Af Sort Previously used on a Hedelius machine with Siemens 840D control Fully functional Includes ROD encoder Available for immediate delivery

Condition: used, Length of infeed table: 6000mm, length of outfeed table: 4150mm, length: 2340mm, width: 1220mm, height: 1780mm, with saw blades as accessories and documentation, was not regularly maintained, without maintenance reports, no known defects. Lsdpfxez D S Dwe Af Sert

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 16632, pressing force: 34 t, overall weight: 18,200 kg, tank capacity: 60 l, type of input current: three-phase, input voltage: 400 V, electrical fuse: 25 A, empty load weight: 6,200 kg, Husmann 22 m³ compaction container with tilting mechanism | Geesink connection | Hook and cable For sale: Husmann compaction container with a capacity of 22 m³, equipped with a hydraulic tilting mechanism with a Geesink connection. This robust compaction container is suitable for professional use in various sectors, including waste collection, industry, logistics, production, and recycling. Thanks to the integrated tilting mechanism, containers can be easily emptied mechanically into the compaction container. The machine can be attached to the front using either a hook or a cable. The container is also equipped with a connection at the rear, but this side is only suitable for hook attachment. This makes the compaction container versatile and compatible with different transport systems. Technical specifications: Brand: Husmann Capacity: 22 m³ Machine number: 16,632 Year of manufacture/refurbishment: 2017 Power supply: 400 V Power: 5.5 kW Fuse: 25 A slow-blow Weight: approx. 6,200 kg Load capacity: 12,000 kg Color: RAL 7016 Hydraulic tilting mechanism with Geesink connection Front: hook and cable attachment Rear: hook attachment Lodez Ep Upepfx Af Sert Large intake opening Heavy-duty industrial design Condition: The compaction container has been used and shows clear signs of wear, consistent with its age and use. The machine has not been cosmetically refurbished but is still functional and ready for use. The robust Husmann construction, large capacity of 22 m³, and integrated tilting mechanism make this an interesting machine for companies looking for a functional compaction container at an attractive price. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Husmann, compaction container, 22m3, 22 m³, waste compactor, container compactor, tilting mechanism, Geesink, Geesink connection, lifting tilting mechanism, hook attachment, cable attachment, waste compaction, recycling, compactor, waste container.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! Lredpjz Ag Ansfx Af Sot TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Ledjz Ebvropfx Af Ssrt Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: E16352-1, Avermann AVOS SP-12 stationary baling press | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling press, manufactured in 2010. This robust Avermann baling press was overhauled by us in 2023 and has not been used since. This makes it an interesting machine for those looking for a well-maintained used baling press that can be put back into operation immediately. The AVOS SP-12 is a robust baling press, suitable for compacting various waste streams and ideally applicable in industries such as manufacturing, logistics, production companies, and waste processing. Technical specifications: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2010 Serial number: E16352-1 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic press system Large feed opening Suitable for transport with a hooklift Special features: The machine was overhauled by us in 2023. After this overhaul, the baling press was not used and has remained idle since. Visually, the machine is in good, used condition. There are, of course, some minor signs of wear that are consistent with the age and type of machine. Lsdpfxoz Eqr Ae Af Ssrt A great opportunity for companies looking for a professional Avermann baling press at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling press, waste compactor, container press, waste compaction, recycling, compactor, press system, self-compacting container.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function • Compliance: CE marking Additional equipment • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40 Ledpfx Afox Enlle Ssrt

Condition: excellent (used), Year of construction: 2008, Schuko Vacomat 300 – Year of manufacture: 2008 – In excellent condition – Performance: 7.5 kW (10.20 hp) Input voltage: 400 V Input current: 15 A Input frequency: 50 Hz Volume flow rate: 5,800 m³/h Lrsdpfx Afjz Eub Ij Sot Suction pressure (max.): 38 mbar Suction capacity: 5,800 m³/h Suction pipe diameter: 300 mm Total weight: 830 kg Features: CE marking Location: available from warehouse 54634 Bitburg – immediately available –